1. Components,
Modules,
Systems,
Vehicles, and
Equipment
Engineered

2. Components
Engineered

3. Controlled suspension damping & ride height system
rotary combo (body acceleration & body-to-wheel displacement) sensor.

4. Controlled suspension damping & ride height system
rotary (body-to-wheel displacement) sensor.

5. Controlled chassis damping, ride height, & steering effort system
controller.

6. Controlled suspension damping system
Bi-state monotube shock.

7. Controlled suspension damping system
Magnetorheological monotube air-lift shock and strut.

8. Controlled suspension roll system
active stabilizer bars.

9. Generation 3 front and rear wheel bearings
with and without ABS wheel speed sensors.

10. Lead acid motor vehicle and stationary batteries.

11. Controlled braking system
apply, release, isolation, and TCS hydraulic poppet valves.

12. EVAP canister purge pneumatic poppet valves.

13. Fuel injector coils.

14. Transmission hydraulic poppet valves.

15. Cam phasing hydraulic spool valves.

16. Ceramic sense elements, hybrid ceramic circuit boards, and
ceramic, PRT, MEM’s, and thin film pressure sensors.

17. Modules
Engineered

18. Controlled suspension system
active roll control valve module.

19. Front brake module.

20. Front corner module.

21. Rear axle module.

22. Cruise control module.

23. ABS, TCS, and/or VSC brake control module.

24. Construction equipment hydraulic ram control module.

25. Heavy duty commercial truck variable nozzle turbo control module.

26. Light truck variable nozzle turbo control module.

27. Systems
Engineered

28. Two corner rear air ride height or leveling control system.

29. Four corner air suspension control system.

30. Manual selectable ride damping control system.

31. Real-time bi-state tri-tube damping control system.

32. Real-time continuously variable tri-tube damping control system.

33. Real-time bi-state monotube damping control system.

34. Wheel speed based body damping control system.

35. Real-time magneto-rheological continuously variable
monotube damping control system.

36. Semi-active roll control system.

37. Active roll control system.

38. Front hydro-electric and rear electric brake-by-wire brake control system.

39. Aftermarket A/C systems.

40. Vehicles
Engineered
With Prototype Systems

41. GM EV with
Front hydro-electric and rear electric brake-by-wire brake control system.

42. Cadillac Allante & Cadillac Eldorado with
Real-time bi-state tri-tube damping control system.
Cadillac Seville with
Real-time continuously variable tri-tube damping control system.

43. Corvette Grand Sport with
Real-time bi-state tri-tube damping control system.

44. Opel Omega with
Real-time continuously variable tri-tube damping control system.

45. Dodge Ram T-Rex 6 x 6 with
Real-time bi-state tri-tube damping control and 6 corner air suspension system.

46. Equipment
Engineered

47. Quarter car simulating shaker for
controlled suspension development.