Back up power is critical for industries and high power generators are usually the norm. In such environments the automatic transfer switches play a key role in seamless transfer of load to power generator from utility lines and back again on resumption of supply.

1. Blades Power Generation Design, Manufacture and
SupplyBespokeAutomaticLoadTransferSwitches
Back up power is critical for industries and high power generators are usually the norm. In
such environments the automatic transfer switches play a key role in seamless transfer.
United Kingdom -- Free-Press-Release.com -- Jan 03, 2017 -- Blades Power
Generation is a specialist in control panel design and manufacture. In addition, they
also provide new and used generation as well as guidance on selection of back up
power for homes and industries.
Residential power requirements are simple, usually ranging from 1 to 5 KVA and
single phase line for individual homes. House owners can also opt for a portable
generator or a stationary model. In this case ease of use is enhanced when the
generator is interfaced to the load and the utility through an automatic changeover
control panel. In domestic environments the automatic changeover mimics a UPS
system with seamless transition between power generator and utility.
Residential requirements are simple enough. However, in industries where loads are
heavy the changeover is handled through more sophisticated automatic transfer
switch. Blades Power Generation has sophisticated computer design studio to
calculate all parameters in critical industrial environments and factor them into the
development of automatic load transfer switch. They design and manufacture 3 and 4
pole systems with current capacities of 25 to 2500 amps. The function of the ATS is
to switch the load to back up power should utility power fail and when it resumes,
switch it back again to the mains. In some industries some processes may be critical
requiring uninterrupted power and this is where Blades Power Generation of UK
excels in design and supply of sophisticated changeover units. Majority of industries
may get by with a single back up power supply in which case the configuration of an
automatic switch is relatively simple but in some instances there are two standby
power generators that call for more sophisticated automatic changeovers not only
between two standby units but also between the utility and the standby power. Where
required they can supply and installed motorized ATS too.
Blades Power Generation uses industry standard components from ABB and Locato
in its bespoke ATS systems thus guaranteeing high reliability. Since they are also
involved in supplying diesel generators, generator connection control panels, building
management systems, isolator enclosures, inverters as well as maintenance and
repairs, they have the knowledge and the expertise to come up with units that perform
flawlessly even in the toughest operating conditions in industries in the UK. Clients
are welcome to avail of consultations and guidance on selection of a range of
Page 1 of 2

2. equipments or control panel systems. Bespoke service is their forte and they can
achieve the highest levels of customization to give maximum returns on investment.
Blaes Power Generation UK may be contacted by phone on 44 (0)1453 799655 or by
mail sales@bladespowergeneration.com or on their website
www.bladespowergeneration.co.uk
Contact Information:
Name: Mark Blades
Company: Blades Power Generation Ltd
Powered by TCPDF (www.tcpdf.org)
Page 2 of 2