This document provides specifications for the CLP-Series pancake lock nut cylinders including:
- 7 models with cylinder capacities ranging from 60 to 520 tons and stroke lengths of 45-50mm
- Dimensions for each model including collapsed height, extended height, diameters, and more
- Maximum operating pressure of 700 bar for all models
- Includes details on integral tilt saddles, corrosion resistant coating, and a warning about using a solid lifting surface for support
1. ▼
60 (606)
100 (1027)
160 (1619)
200 (1999)
260 (2567)
400 (3916)
520 (5114)
50
50
45
45
45
45
45
86,6
146,8
231,3
285,6
366,8
559,5
730,6
432
734
1040
1285
1650
2517
3287
CLP-602
CLP-1002
CLP-1602
CLP-2002
CLP-2502
CLP-4002
CLP-5002
114
116
Cylinder
Capacity
ton (kN)
Stroke
(mm)
Cylinder
Effective
Area
(cm2
)
Oil
Capacity
(cm3
)
Model
Number *
CLP-Series, Pancake Lock Nut Cylinders
Shown from left to right: CLP-2002, CLP-5002
• Extremely low height for use in confined areas
• Lock nut for positive and safe mechanical load holding
over a long period of time
• Single-acting, load return
• Optional special synthetic coating for improved corrosion
resistance and lower friction for smoother operation
• Overflow port functions as a stroke limiter
• CR-400 coupler and dust cap included on all models.
The Shortest
Power Lifter
▼ Only the extreme low height CLP-cylinder fits in this confined area to lift the
construction. The V-82 needle valve is used to control cylinder speed during
lifting and lowering.
Tilt Saddles
All CLP-Series cylinders
include integral tilt saddles
with maximum tilt angles
up to 5°.
Gauges
Minimize the risk of
overloading and ensure long,
dependable service from
your equipment. Refer to the
System Components Section for a full
range of gauges.
Page:
Hoses
Enerpac offers a complete
line of high quality hydraulic
hoses. To ensure the
integrity of your system,
specify only Enerpac
hydraulic hoses.
Page:
* Please contact Enerpac for ordering information for
CLP-cylinders with special synthetic coating.
www.as-hydraulic.com
2. 125
137
148
155
159
178
192
175
187
193
200
204
223
237
140
175
220
245
275
350
400
105,0
136,7
171,6
190,7
216,1
266,9
305,0
Tr 104 x 4
Tr 136 x 6
Tr 171 x 6
Tr 190 x 6
Tr 216 x 6
Tr 266 x 6
Tr 305 x 6
19
21
27
30
32
39
48
96
126
160
180
200
250
290
6
8
9
10
11
11
10
5°
5°
5°
5°
5°
4°
3°
28
31
40
43
44
55
62
15
26
44
57
74
134
189
CLP-602
CLP-1002
CLP-1602
CLP-2002
CLP-2502
CLP-4002
CLP-5002
255
246
48
Collapsed
Height
A
(mm)
Extended
Height
B
(mm)
Outside
Diameter
D
(mm)
Cylinder
Bore
Diameter
E
(mm)
Base to
Advance
Port
H
(mm)
Saddle
Diameter
J
(mm)
Saddle
Protrusion
from Plgr.
K
(mm)
Saddle
Max. Tilt
Angle
R
Lock
Nut
Height
S
(mm) (kg)
Plunger
Diameter
F
(mm)
Model
Number *
Single-Acting, Pancake Lock Nut Cylinders
CLP
Series
Capacity:
60 - 520 ton
Stroke:
45 - 50 mm
Maximum Operating Pressure:
700 bar
ALL CLP-SERIES
CYLINDERS REQUIRE A
SOLID LIFTING SURFACE
FOR CORRECT SUPPORT.
THE USE OF PANCAKE CYLINDERS
ON SURFACES SUCH AS SAND,
MUD OR DIRT, MAY RESULT IN
CYLINDER DAMAGE!
WRONG!
Rough soil
For more safety instructions see our
‘Yellow Pages’.
RIGHT!
Flat lifting
surface
Page:
Speed Chart
See the Enerpac Cylinder Speed
Chart in our ‘Yellow Pages’
to determine your approximate
cylinder speed.
Page:
Longer Stroke Lock Nut
Cylinders
For longer stroke lock nut
applications CLL-Series
cylinders are the perfect
choice.
Page:
www.as-hydraulic.com