Though there are a lot of valves that every oil and gas engineer should understand and know about, we are listing the most common valve types applicable in the oil and gas industry and how they are deemed useful industry-wise.
2. • Valves are crucial parts of any piping system application for the control and
regulation of flow and pressure of materials—whether gas, oil, vapours or liquid.
• Though there are a lot of valves that every oil and gas engineer should
understand and know about, we are listing the most common valve types
applicable in the oil and gas industry and how they are deemed useful industry-
wise.
INTRODUCTION
3. Ball valves :
•As ball valves supplier, we recommend ball valves application-
wise in a number of industry sectors including gases, air and
liquid.
•Ball valves are mostly built to quickly turn on and turn off,
feature tight-sealing having low torque.
•The only demerit to ball valves is that they characterize
throttling properties. Made of several metals, the seats usually
come from softer material including Teflon.
4. Gate Valves :
•The function of Gate valves is to mainly start or check flow
when a linear line flow of liquid and minimum restriction of
flow are required.
• In terms of service, the gate valves are either fully closed or
fully open.
•Fevisa, is the leading gate valves supplier for a range of
industry applications.
5. Globe Valves :
•As a Globe valves supplier , we recommend globe valves for
a number of industry applications including transportation of
fuel oil and turbine lubricant oil system and cooling water
systems.
•It is a linear motion valve for starting, stopping and
regulating flow.
•Traditionally applicable for isolation and throttling solutions,
the globe valve has become the default choice for numerous
major applications.
6. Control Valves :
• Control valves are utilized in a gamut of processes for controlling
flow, temperature, pressure or other system variables.
• It is recommended to check the size of the pipe, the total pressure
that the system works on, process conditions, the flowing media
and several other factors before installing control values.
• As control valves suppliers, we advise using control valves
wherever regulating the rate of fluid flow is required, as the
position of disk or valve plug is adjusted by an actuator.
7. Butterfly Valves :
• Butterfly valves are constructed to simplify valve operation, but
with a bit of speed compromised.
• Care must be ensured to see that butterfly valves are installed at a
minimum of 6 pipe diameters off from different line elements.
• These valves are mostly lightweight, fast, and efficient to use, and
as valves manufacturers and suppliers, we offer Butterfly valves in a
wide range of sizes that can easily withstand high-pressure
recovery and drop in low-pressure.
8. Conclusion :
• Fevisa, one of the leading valve stockist in UAE and our valves made in
Europe as they spell quality in all aspects, guaranteed monitoring, and are
completely capable of meeting all industrial market verticals.
• We are also one of the major Valve Manufacturers and valve suppliers when it
comes to WRAS approved Valves, which allows product installations that receive
or carry water from the public distribution system mains water supply in the UK
to be fully compliant with the Water Supply Regulations and Scottish Byelaws.
• We have a wide range of ex-stock valves and stock valves. Looking for BALL,
GLOBE, GATE, PLUG, CHECK, ESD, BUTTERFLY Valves? You search ends right
here.