Project membuat kandang ayam pintar dengan menggunakan software LabView dan Arduino.

1. INSTRUMENTASI
“SMART CHICKEN CAGE”
Using Arduino Uno with LabVIEW

2. Ari Dwiatmojo 181611004
Salma Dzakiyah Az-zahro 181611027
Septyansah 181611029
Shelly Maulinda 181611031
KELOMPOK 2

3. WHAT IS SMART CHICKEN CAGE ?
an innovation to make it easier for poultry farmers, especially chickens
to not have to bother opening and closing doors during the day and
night and when it rains so this tool is very practical and effective to use

4. 1 2 3 4
COMPONENT
Arduino Uno Motor Servo
Protoboard &
Cable Jumper Sensor ldr &
rain sensor

5. The Power of PowerPoint | thepopp.com 5
In this project Arduino functions as a
microcontroller, where all programming
containing commands can be accommodated
by Arduino to be distributed to machines that
are designed, or to be transferred to
computers.
ARDUINO UNO

6. Servo motor is a device or rotary actuator
(motor) that is designed with a closed loop
feedback control system (servo), so that it can
be set-up or set to determine and ascertain
the angular position of the motor output shaft
MOTOR SERVO

7. Protoboard functions as a media for making
temporary ecetronic circuits with the aim of
testing or prototyping without having to solder.
PROTOBOARD

8. The Power of PowerPoint | thepopp.com 8
This jumper cable can be used to connect one
electronic component to another when making
prototype projects using a breadboard.
CABLE JUMPER

9. Sensor
LIGHT SENSOR
Light sensor is a device used to
convert light quantities into
electrical quantities
SENSOR AIR HUJAN
Rain sensor is a type of sensor that serves
to detect the occurrence of rain or not,
which can be used in all kinds of
applications in everyday life

10. PROCEDURE
10
Because it uses a light sensor and a rainwater sensor then during the
daytime the door on the cage will automatically open along with the
lamp turn off. And while at night the door will close along with the lamp
turn on. other than that when it rains the door will automatically close
and when it ceases again the door will automatically open if during the
day.

11. LAbView with arduino
11
LabVIEW (Laboratory Virtual Instrument Engineering Workbench) is a visual
programming language developed by National Instruments. It's very useful for data
acquisition (purpose of this tutorial), instrument control, industry automations.
Arduino is an open-source computer hardware used to develop interactive objects,
taking inputs from a variety of switches or sensors, and controlling a variety of lights,
motors, and other physical outputs.

12. FRONT PANEL PROJECT

13. BLOCK DIAGRAM PROJECT

14. Thank You for Watching!