Our Arctic Heat Pump is a top quality, energy-efficient air source heat pump that is perfect for cold climates. With its unique dual core design, it doubles the airflow allowing you to heat or cool homes with ease while also saving money with its energy efficient system. For more information Visit website: https://www.arcticheatpumps.com/air-source-heat-pump-with-solar.html

2.  Are you looking for a highly efficient air source heat pump
technology that works well for cold climates in North
America? Arctic Heat Pump is the industry-standard heat
pump working effectively for hydronic heating and cooling
purposes. This system is perfectly engineered to integrate
quickly with a solar thermal heating system. This heat pump
technology can increase the solar system’s operational costs
and overall efficiency by 20%. The solar thermal system
makes a perfect combination to integrate with the Arctic
series heat pump. The unit can add more than 47,000 BTU
per day on average per collector.

3.  Generally, the solar thermal system uses the SunRain solar
vacuum tube collectors. These collectors can accommodate the
hot water needs of homes amidst the coldest winter days in North
America. They are the highly advanced collectors in North
America and come with a ten-year warranty. Solar vacuum tubes
deliver higher efficiency, which allows them to produce energy
even during cloudy weather conditions. However, the solar
thermal units have an 80% efficiency rating which means they
absorb 80% solar energy. But the solar PV systems only deliver
13-16% efficiency. Now you know why solar thermal systems have
been commonly used in areas with the lowest electricity costs
worldwide.

4. What Makes the Air Source Heat Pump Right for
Solar Thermal System Integration?
 Solar evacuated tubes use heat pipe technology to transfer
solar energy to a heat bulb. The temperature of the heat bulb
can rise to 300 C. Every solar vacuum collector has 20 or 30
bulbs inserted into an insulated copper header, otherwise
known as a heat exchanger. The heat pipes transfer heat
energy to the copper header and a special glycol heating fluid.
Every heat exchanger has around 2.2 liters or 0.6 gallons of
heating fluid.

5.  A temperature sensor is inserted into the heat exchanger,, and the other
temperature sensor is placed at the bottom of the heat pump buffer tank.
The system has a differential controller with a pump unit that helps
determine both temperatures. When the heating fluid at the top of the
collector goes above the water temperature in the buffer tank, the pump
switches on, commencing the energy transfer.
 The hot fluid is circulated throughout the large heat exchanger present in
the bottom part of the tank. After that, the energy is again transferred to
the storage tank, which will be transferred to the remaining part of the
home heating system for further use.

6. The Key Takeaway –
 Integrating the air source heat pump with the solar
thermal system is ideal because both units have the
same glycol heating fluid. In addition, they share the
same principle of energy storage thermal mass.
Therefore, if you are looking to cut down your home
heating costs, you should consider integrating your air-
to-water heat pump with the solar thermal unit to
increase the system performance and minimize
operational costs to a greater extent.
 If you want to learn more about Arctic Heat Pumps,
contact the air source heat pump experts at 1-866-800-
8123.

7. 1. Address - #20-305 McKay Ave
2. City – Winnipeg
3. State – MB
4. Zip - R2G 0N5
5. Phone - 866-800-8123
6. Email - sales@arcticheatpumps.com
7. Web - https://www.arcticheatpumps.com/