Design the major analog and digital functional blocks. Perform a.docx

•Download as DOCX, PDF•

0 likes•6 views

Design the major analog and digital functional blocks. Perform and include any preliminary engineering calculations that support the design. (Actual simulation results can be presented next week.) Develop a Preliminary Design Schematic. Use a schematic capture program such as MultiSIM to construct an electronic schematic, if relevant, of any major functional blocks. Develop a flowchart for any major software component of the system (Must be detailed and ready to be programmed). Code of critical blocks of software may be submitted next week. Develop a component list based on the components identified to date. Submit all the documents above alone with the documents compiled in the last assignment of ET410 : Project Proposal Requirements Document System Design Review Final Schedule Final Budget .

Education

Similar to Design the major analog and digital functional blocks. Perform a.docx

Project

thejas babu

Altera up1

Emery Laura Ttito

4-5 pages Management is worried, after consulting with the IT department that the current documentation of the present architecture was not done correctly and with the required details, therefore if IoT is implemented they desire more detailed graphical documentation on its implementation. Provide the following components as part of an architecture model graphic to be delivered to management for the asset tracking system: Provide an introduction to the paper concerning the purpose of the graphic and the overall solution being recommended by the asset tracking IoT implementation (2-3 paragraphs). Provide descriptive information regarding the architectural model graphic, and the details describing the devices, applications, Cloud/Server environment and gateway. (2 pages) Provide the architectural graphic with the components below (Describe each of the objects on the diagram below, the interconnections or interfaces, types of data traveling across the connections, active protocols, cabling or wireless connections, and implemented security): Devices (Generic device - Sensing and Actuating Devices) IoT Application (transforms the data for value to the user) Cloud/Server (data storage, processing and management) Gateway capability (data is acquired, forwarded to the communications network) Provide a conclusion to the paper summarizing the content and purpose of the paper. An example of the required level of detail for your graphic can be found at http://www.latogalabs.com/2017/05/iot-architecture-the-journey/ . .

4-5 pagesManagement is worried, after consulting with the IT.docx

BHANU281672

IT 510 Final Project Guidelines and Rubric Overview The final project for this course is the creation of a System Proposal Document. In any modern enterprise, it is crucial that all of the different stakeholders, users, inputs, and outputs that relate to the business’s IT systems coalesce in a logical and cohesive way for the systems to be effective. As a member of an IT team, your overarching goal is to ensure that the IT systems ultimately do what the business needs them to do. In this course, you have learned about the key principles and practices underlying the analysis, design, implementation, and management of IT systems. In this final project, you will apply this knowledge by creating a systems proposal document. The project is divided into four milestones, which will be submitted at various points throughout the course to scaffold learning and ensure quality final submissions. These milestones will be submitted in Module Two, Module Four, Module Six, and Module Eight. The final submission will occur in Module Nine. In this assignment, you will demonstrate your mastery of the following course outcomes:  Assess the relationship of systems analysis, design, implementation, and development processes as they relate to the management of information technology systems  Communicate the paradigms, processes, and activities of systems development to diverse audiences  Apply structure and object oriented analysis modeling techniques to analyze, design, and manage information technology systems  Construct written and visual representations of the analysis, design, implementation, and management of information technology systems based on the systems development life cycle Prompt You will select your own case study and will apply the content provided, describing the business process to complete the final project. Alternate sources for case studies include the case studies found in the textbook with the exception of the Personal Trainer Case. You can additionally search the internet for business case ideas. You will complete an analysis of an existing information technology system and make recommendations for updates to meet business goals based on your chosen case study. Your final submission will include an introduction, systems requirements, systems design specifications, and an implementation plan. All of the components listed below should be submitted as a single, organized systems proposal document and include screenshots of all relevant diagrams, charts, and tables. I. Introduction: Provide an overview of your selected case. Be sure to provide appropriate citations and reference to the case study you have selected. a) Background: Establish a context for understanding your systems proposal. Specifically, explain any essential paradigms, processes, and activities of the existing information technology systems. b) Problem Statement: What is the problem that needs to be solved? Why is it a problem? What are the impacts to the enterprise? c) A.

IT 510 Final Project Guidelines and Rubric Overview The final projec.docx

careyshaunda

Management is worried, after consulting with the IT department that the current documentation of the present architecture was not done correctly and with the required details, therefore if IoT is implemented they desire more detailed graphical documentation on its implementation. Provide the following components as part of an architecture model graphic to be delivered to management for the asset tracking system: Provide an introduction to the paper concerning the purpose of the graphic and the overall solution being recommended by the asset tracking IoT implementation (2-3 paragraphs). Provide descriptive information regarding the architectural model graphic, and the details describing the devices, applications, Cloud/Server environment and gateway. (2 pages) Provide the architectural graphic with the components below (Describe each of the objects on the diagram below, the interconnections or interfaces, types of data traveling across the connections, active protocols, cabling or wireless connections, and implemented security): Devices (Generic device - Sensing and Actuating Devices) IoT Application (transforms the data for value to the user) Cloud/Server (data storage, processing and management) Gateway capability (data is acquired, forwarded to the communications network) Provide a conclusion to the paper summarizing the content and purpose of the paper. .

Management is worried, after consulting with the IT department t.docx

jessiehampson

Network Analyzer and Report Generation Tool for NS-2 using TCL Script

IRJET Journal

WJ White Resume_July15_Functional

Wm White

Resume-Rohit_Vijay_Bapat_December_2016

Rohit Bapat

The main theme of the project is to develop software for calculating the reliability & capacity outage table for generation purposes. The method for the calculation is quite lengthy, complex & a high possibility to get a human error during the calculation. The methods used to calculate reliability & capacity outage are Digital Method, Partial Binomial Method & Recursive Method, this method is highly recommended, but can be complex during the actual calculation. To justify the need for this method & also to remove the human error factor during quicker & better calculation, the software is made with the help of the python software. The python-based website will be easily accessible to use to any sort of user, choosing python program was a better option as it does not compile but interprets the calculation are in constant runtime with the input of values, this program helps in developing highly complex calculation which is up to many decimal points.

SOFTWARE BASED CALCULATION OF CAPACITY OUTAGE OF GENERATING UNITS

vivatechijri

eXtended Automation, the core principle of TwinCAT 3 adds numerous enabling tools to the lineup of technologies already established in the TwinCAT platform. While the bases for automation, PLC, motion control, robotics and HMI programming have been well-covered in TwinCAT for many years, version 3 adds the opportunity to use Object-Oriented programming, C/C++, Matlab®/Simulink®, software-based safety and more, all in a standardized Microsoft Visual Studio®-based shell. Of course, all of the IEC 61131-3 programming languages are usable in TwinCAT 3 so programmers can select the languages and tools that are best-suited to each application. This educational seminar will provide a technical overview of the primary elements of TwinCAT 3 and eXtended Automation technology. Watch this webinar to learn the latest automation programming tools made available by TwinCAT 3 including: Visual Studio-enhanced programming environment IEC 61131-3 3rd edition update Object-oriented programming C/C++ programming options Matlab®/Simulink® integration

“eXtending” the Automation Toolbox: Introduction to TwinCAT 3 Software and eX...

Design World

Assignment Description Management is worried, after consulting with the IT department that the current documentation of the present architecture was not done correctly and with the required details, therefore if IoT is implemented they desire more detailed graphical documentation on its implementation. Provide the following components as part of an architecture model graphic to be delivered to management for the asset tracking system: Provide an introduction to the paper concerning the purpose of the graphic and the overall solution being recommended by the asset tracking IoT implementation (2-3 paragraphs). Provide descriptive information regarding the architectural model graphic, and the details describing the devices, applications, Cloud/Server environment and gateway. (2 pages) Provide the architectural graphic with the components below (Describe each of the objects on the diagram below, the interconnections or interfaces, types of data traveling across the connections, active protocols, cabling or wireless connections, and implemented security): Devices (Generic device - Sensing and Actuating Devices) IoT Application (transforms the data for value to the user) Cloud/Server (data storage, processing and management) Gateway capability (data is acquired, forwarded to the communications network) Provide a conclusion to the paper summarizing the content and purpose of the paper. An example of the required level of detail for your graphic can be found at http://www.latogalabs.com/2017/05/iot-architecture-the-journey/ . .

Assignment DescriptionManagement is worried, after consultin.docx

lesleyryder69361

Lecture 7 - System Design (Data Modelling) (1).pdf

DelishiaScott

Assignment Description Management is worried, after consulting with the IT department that the current documentation of the present architecture was not done correctly and with the required details, therefore if IoT is implemented they desire more detailed graphical documentation on its implementation. Provide the following components as part of an architecture model graphic to be delivered to management for the asset tracking system: Provide an introduction to the paper concerning the purpose of the graphic and the overall solution being recommended by the asset tracking IoT implementation (2-3 paragraphs). Provide descriptive information regarding the architectural model graphic, and the details describing the devices, applications, Cloud/Server environment and gateway. (2 pages) Provide the architectural graphic with the components below (Describe each of the objects on the diagram below, the interconnections or interfaces, types of data traveling across the connections, active protocols, cabling or wireless connections, and implemented security): Devices (Generic device - Sensing and Actuating Devices) IoT Application (transforms the data for value to the user) Cloud/Server (data storage, processing and management) Gateway capability (data is acquired, forwarded to the communications network) Provide a conclusion to the paper summarizing the content and purpose of the paper. Your paper should be 4–5 pages in length, not counting the Title page and Reference page An example of the required level of detail for your graphic can be found at http://www.latogalabs.com/2017/05/iot-architecture-the-journey/ . A great free tool to use in creation of this diagram is at https://www.draw.io/ . Click on “create a new diagram”, select one of the diagrams options (recommended to use “Network”), then start rearranging and titling your objects on the diagram. .

Assignment DescriptionManagement is worried, after consultin.docx

standfordabbot

part 1 Management is worried, after consulting with the IT department that the current documentation of the present architecture was not done correctly and with the required details, therefore if IoT is implemented they desire more detailed graphical documentation on its implementation. Discuss the following components as part of an architecture model graphic to be delivered to management and within your assignment for the asset tracking system: Devices (Generic device - Sensing and Actuating Devices) IoT Application (transforms the data for value to the user) Cloud/Server (data storage, processing and management) Gateway capability (data is acquired, forwarded to the communications network) part2 Management is worried, after consulting with the IT department that the current documentation of the present architecture was not done correctly and with the required details, therefore if IoT is implemented they desire more detailed graphical documentation on its implementation. Provide the following components as part of an architecture model graphic to be delivered to management for the asset tracking system: Provide an introduction to the paper concerning the purpose of the graphic and the overall solution being recommended by the asset tracking IoT implementation (2-3 paragraphs). Provide descriptive information regarding the architectural model graphic, and the details describing the devices, applications, Cloud/Server environment and gateway. (2 pages) Provide the architectural graphic with the components below (Describe each of the objects on the diagram below, the interconnections or interfaces, types of data traveling across the connections, active protocols, cabling or wireless connections, and implemented security): Devices (Generic device - Sensing and Actuating Devices) IoT Application (transforms the data for value to the user) Cloud/Server (data storage, processing and management) Gateway capability (data is acquired, forwarded to the communications network) Provide a conclusion to the paper summarizing the content and purpose of the paper. An example of the required level of detail for your graphic can be found at http://www.latogalabs.com/2017/05/iot-architecture-the-journey/ . .

part 1Management is worried, after consulting with the IT .docx

smile790243

NCIT civil Syllabus 2013-2014

LAKSHITHA RAJAPAKSHA

Agile & Iconix sdlc

Ahmed Nehad

In the past, the process of preparation of Electrical Specification for Transformers was carried out by drafting in AutoCAD and Transformer Design calculations were done manually based on output data obtained from Disintegrated Transformer Design programs. In today's competitive environment, where design cycles have reduced drastically, it becomes imperative to fully computerize the Electrical Specification Document Generation for Transformer Design to speed up the whole design process.

Review of Development done in Computerization of Electrical Specifications fo...

ijsrd.com

Similar to Design the major analog and digital functional blocks. Perform a.docx (17)

Project

Altera up1

4-5 pagesManagement is worried, after consulting with the IT.docx

IT 510 Final Project Guidelines and Rubric Overview The final projec.docx

Management is worried, after consulting with the IT department t.docx

Network Analyzer and Report Generation Tool for NS-2 using TCL Script

WJ White Resume_July15_Functional

Resume-Rohit_Vijay_Bapat_December_2016

SOFTWARE BASED CALCULATION OF CAPACITY OUTAGE OF GENERATING UNITS

“eXtending” the Automation Toolbox: Introduction to TwinCAT 3 Software and eX...

Assignment DescriptionManagement is worried, after consultin.docx

Lecture 7 - System Design (Data Modelling) (1).pdf

Assignment DescriptionManagement is worried, after consultin.docx

part 1Management is worried, after consulting with the IT .docx

NCIT civil Syllabus 2013-2014

Agile & Iconix sdlc

Review of Development done in Computerization of Electrical Specifications fo...

More from alexandernmeredith30

Write a Python program to convert temperature from Celsius to Fahrenheit and Kelvins; from Fahrenheit to Celsius and Kelvins. Document your program – to include your name, course, date written, and the formulas used in the conversions. Instruct the user on how to enter the data requested. You must use the IF, ELSE, ELIF statements or a combination of these statements. Required output – temperature entered, converted temperature, and the exact phrase “This program was written by .” .

Write a Python program to convert temperature from Celsius to Fahren.docx

alexandernmeredith30

Write a reading reflection notes of chapter one up to chapter 6 in: Simpson, P. (2004), Stylistics, and Your notes should be clear considering the following components (Final mark= 10) * Write each chapter separately. The notes you took during the classes. Write a detailed description of some aspect of the chapters and the experience that you felt was particularly meaningful for you. * A discussion of what you have personally learned. Also, discuss your plans for improving your learning experience of some aspects in the chapters. You should concentrate on the main points in the chapters. Finally, discuss how the information presented on those chapters are connected with your background knowledge of stylistics and how they improved your linguistic knowledge. * Your notes should be written in around 750 words for the whole chapters. *You will be given 10 days to complete the tasks. * Use Times New Roman font – size 12. * The paper should be double-spaced. .

Write a reading reflection notes of chapter one up to chapter 6 in.docx

alexandernmeredith30

Write a Reaction Paper- Assigned 4-5pages.What are the human.docx

alexandernmeredith30

Write a qualitative research paper with the following topic The He.docx

alexandernmeredith30

Write a Python program that reads IP addresses from an input file (ip_input.txt), checks its format and validity, and then checks its connectivity to each IP. Use the IP input file shown as below. Submit your code and the output screen shots after a run. 8.8.8.8 2.2.2.2.2 127.5.6.7 3.3.3.305 0.120.3.5 8.8.8.1 169.234.6.8 8.8.4.4 4.4.8.8 (you may add more to test your code) Validity check (check the format and filter the addresses that are not publicly routable): - IP should be four dotted format (x.x.x.x) - octets having values between 0-255. - IP should not belong to one of these blocks: o 0.0.0.0/8 o 127.0.0.0/8 o 169.254.0.0/8 o (you may add more if you like) Connectivity check: - Use ping for testing reachability to the IP address. The output could look like: Ip address: 8.8.8.8 Validity: yes Reachability: yes Ip address: 2.2.2.2.2 Validity: no – bad format Reachability: no Ip address: 127.5.6.7 Validity: no – in block 127.0.0.0/8 Reachability: no ……. ……. .

Write a Python program that reads IP addresses from an input fil.docx

alexandernmeredith30

Write a Python program to hold information on a course Program should have a main class Variables are: Teacher name, Credits, Course Name Add a method to enter teacher name and a method to enter credits Use a try catch block to verify that credits is an "int" Add a method to report on the variables Use _init_ method to create attributes Use def main method to start class Create at least two instances Add data and print using the methods defined in the class. .

Write a Python program to hold information on a courseProg.docx

alexandernmeredith30

Write a proposal to a local government official to propose a cha.docx

alexandernmeredith30

Write a proposal of 200 words. In this proposal, explain your future job, the organization, and your presentation audience. The presentation will present some information and research that would help your future workplace improve. Then describe your topic and what type of data you might include in your presentation. FUTURE JOB: Community Center Owner ORGANIZATION TOPIC: No Child Left Behind WORKPLACE: Florida AUDIENCE: Educators, Parents and General Public .

Write a proposal of 200 words. In this proposal, explain your future.docx

alexandernmeredith30

Write a proposal about indian songs: "Zindagi Bhar Nahin Bhulegi” In my life I will never forget (Barsaat ki Raat - Rainy Night 1960) MD Roshan. Lyrics Sahir Ludhianvi. ---HIFM CD4 Track 2 *** 1-2 pages Title (current working version) Succinctly describes (summarizes) the project as a whole and its “parts”: your subject, thesis/purpose (and/or main point, primary research questions), your proposed approach and methods, …, and the broader significance of and/or issues addressed by your project. A preliminary list of source The elements you will focus on Playback singer/music director/ actor or actress/ …Genre of the film? Relevant themes and topics from the class Resources? Readings? The paper MUST consider musical elements in the song, using musical terminology introduced in the class, as much as possible, according to your musical abilities. Other elements of the song may be addressed including visual picturization, lyrics, poet, composer, arranger, performer, song situation, cultural and social significance, historical context, or other forms of interpretation. Please use first person to describe your own individual experience of the song. Visualization is encouraged, in the form of graphic representation of some aspect of the sound as you experienced it, rhythmic and/or melodic, typically on an XY axis, X (horizontal) being time, Y (vertical) being pitch, with references to lyrics and picturization. YOU MUST refer to at least TWO books, articles, or other print reference materials used in this course in your papers. These references must be correctly cited according to the bibliographic style of the Ethnomusicology Journal, or else according to MLA style. .

Write a proposal about indian songs Zindagi Bhar Nahin Bhulegi” In.docx

alexandernmeredith30

Write a proposal according to the prompt/instructions on the attached document “Project 4: Proposal" Upload document as an attached file. Remember, you are basically putting together all the sections we've drafted over the past few weeks into one document. Don't completely start over! topic should be based on this : 1) My main research question is, how is this global pandemic COVID 19 affecting school kid’s diet plan since most of the schools are closed. My secondary question is, do parents in my community have good knowledge on kid’s diet plan? 2) For broad information, first of all I need to do research on the proper diet plan needed for kid’s based on their age. 3) First of all I need to know if each and every parents in my community have proper idea about their kid’s balanced diet plan. It is very important for parents to know about their kid’s food plan to maintain their good health condition. 4) Since we are facing global pandemic, it is not safe to visit each parents to collect information whether they are feeding proper diet to their kids or not. So I need to create a poll/survey on different social media accessible to my community. I will suggest them to go through various YouTube videos where they can get proper information. .

Write a proposal according to the promptinstructions on the attac.docx

alexandernmeredith30

Write a Project Risk Management Paper. Your Essay should cover the following risk management steps ; Abstract Introduction - what is risk in a project. This is a definition of risk as it relates to a project Risk Analysis Process Identification Assess the Risk Develop a Risk Response plan Monitor and review risk Conclusion References MINIMUM 1200 WORDS, 3 APA REFERENCES. ABSOLUTELY NO PLAGIARISM, MUST SUBMIT COPY OF TURNITIN REPORT. DUE 5/1/2021 AT 9AM NO EXCUSES, NO MORE TIME WILL BE GIVEN. .

Write a Project Risk Management Paper. Your Essay should cover the f.docx

alexandernmeredith30

Write a program with a class called Employee for 5 employees with a constructor with your last Name as a String your id as an integer and any double rate and hours you choose. Create a method getInfo() and showInfo(). Have an array of objects for 5 employees that will call the getInfo() and showInfo() and display in chart form with correct money format the calculated salary. It will be your name and constructor info for the first object and 4 others will be interactive. .

Write a program with a class called Employee for 5 employees with a .docx

alexandernmeredith30

Write a program that uses the ArrayList class and populate it with a.docx

alexandernmeredith30

Write a program that gets two inputs an integer and a character. Use repetition control structures better known as "loops" to output a triangle shape composed of the character and the width specified by the integer. If the input is an even number, it should be increased to the next odd number. Use meaningful variable names, nested loop statements with proper indentation, appropriate comments, and good prompting messages. .

Write a program that gets two inputs an integer and a character. Use.docx

alexandernmeredith30

Write a press release with media list.Introduction paragraph sta.docx

alexandernmeredith30

Write a Process Paragraph Write at least six steps. .docx

alexandernmeredith30

write a post that agrees OR disagrees with the assertion. Cite specific scenes and/or use specific quotes from the novel to support your position. Your answer should be written in no fewer than 200 words . When you are done posting your response, reply to at least one classmate in no fewer than 75 words . Although the novel is titled Sula , the real protagonist is Nel because she is the one who is transformed by the end. .

write a post that agrees OR disagrees with the assertion. Cite.docx

alexandernmeredith30

Write a Process Paragraph Write at least six steps. Reme.docx

alexandernmeredith30

Write a post in response to the following prompt. Pick an institution of your choice such as education, family, healthcare, the economy, or government. Following the chart, explain (or speculate) in detail how technological changes might affect the institution you choose. Make sure you give specific examples for each stage of the chart. What are some effects of technology on society today? How has this change affected organizations, behavioral patterns, or social interactions please use sociological references at least 2 .

Write a post in response to the following prompt.Pick an institu.docx

alexandernmeredith30

write a position paper of at least 350 words. You must use proper ci.docx

alexandernmeredith30

More from alexandernmeredith30 (20)