1. Equipment Yes No If no, whatis the
solution?
Comments
Lighting Upon enteringthe
drama studio.Check
there are 10 fresnelsin
the rig. Fresnelslook
like this:
If 10 fresnelsare not
present,youneedto
rig them.Lightsare
foundat the back of
the hall.
You will needtohang
the lightfroma bar
usinga g clamp.
Tightenthe g clamp
and attach the safety
chainto the bar.
You alsomust checkif
all the lightshave a
safetychainor theyare
not safe to be inthe
rig.
If the lightdoesn’thave
a safetychain,youwill
have to attach one. It
mustbe attachedto
the bar and light. They
can be foundat the
back of the hall.
You alsomust check
that all lightsare rigged
correctlyand safely.
Theyare not safe for
use until thisstephas
beencompleted.
If lightsare notrigged
properly,youmust
determine why,andfix
thisproblem. If you
cannot determinethe
problem,youmust
seektechnical
assistance.
You mustalso check
there isa G clampfor
If the lightdoesnot
have a g clamp,they
2. each light. can be foundat the
back of the hall. G
clampsshouldbe used
to secure the lightto
the bar and screwedin
tightlytoprevent
movement.However,if
the lightishung upside
downit will notturn
fromside to side and
therefore cannotbe
focused.
Fresnelshave Barn
doorsto helpdirectthe
light.Youmust check
theyhave these
attached.
If the lightdoesnot
have barn doors,they
can be foundat the
back of the hall.
Barn doors can be slid
ontofresnels.
You mustcheck forgel
framesif theyare
required.
If the lightdoesnot
have gels/gel frames,
theycan be foundat
the back of the hall.
Slide inthe gel frame
behindthe barndoors.
You mustalso check
that the lampholderis
If the lampholderis
open,close itcarefully
3. closedproperly,which
will make the lamp
safer.
and ensure itissafe.
You mustalso check
that eachlighthas
beenpluggedin
properly,toavoid
havingto checkfuses
etc whenlightsdonot
come on.
If lightsare notplugged
inproperly, please plug
incorrectlyand check
lights.
You mustthenmake
sure that the lightsare
correctlypatchedinto
the desk.
You needtomatch the
socketto the dimmer
numbers,i.e 6-6. This
ispatching.
Ensure that the
dimmerdeskis
connectedtothe
lightingdeskwithDMX
cables.
If it is not,DMX cables
can be foundat the
back of the hall. You
mustthenconnectthe
DMX tothe right
connectioninthe
dimmerdesk.
Make sure that the
deskispluggedintoa
32 amp socket.
32 amp socketsare
locatedonthe ground.
You mustthencheck
that the lightingdeskis
switchedonand
workingbefore youcan
checkyour lights.
If it is notswitchedon,
switchiton.
Ensure the grand
masterfaderis up.
If the grand masteris
not up,the deskwill
not work.
4. You mustthenalso
checkthat a andb
fadersare on 10.
If theyare down,you
mustput themup in
orderfor the lightsto
come on.
You are thenable to
checkthe lights.Putup
1 – 6 individuallyto
checklights.
Pushup the fadersone
by one.
If lightsare not
working,youmust
checkthe lightsfuses.
Seektechnical
assistance.
Once you have
determinedthe lights’
fusesare not the
problem,youmust
checkthe extension
cable fuse.
Seektechnical
assistance.
Once you have checked
fuses,youmustcheck
bulbsinthe lightsas
thisismost likelythe
problem.
Change bulb.Correct
bulbscan be foundat
the back of the hall.
If you cannot
determine the
problem,pleaseseek
technical assistance.
Sound Checkif there isa iPod
leadconnectedtothe
sounddesk.
If there is noiPodlead,
youmust reattachone.
Theycan be foundat
the back of the hall.
Alsocheckif the
outputsfromthe desk
If the speakersare not
connected,youmust
connectthemusingIEC
5. are connectedtothe
speakers,asthisisa
vital stepinproducing
sound.
cables.These canbe
foundat the back of
the hall.
Projection Whenusingprojection
youmust checkthere is
a laptopfor youruse.
If not, youmust source
and connecta laptop.
You alsomust check
that the projector
starts up correctly.
If the projectordoes
not start upproperly,
seektechnical
assistance.
Previouscheck:
Signature:
Date checked:
Date of nextcheck: