1. CURRICULUM VITAE.
OF
MD. ABUL KALAM AZAD ( Zoha )
MOB. : 01735189069, 01709121574
Application for the post of –
Practical Experience Service Record
1. Name of Organization Dressmen Group (Chandra).
Position Manager (Q.A / Q.C).
Duration August - 2015 to till now.
Working Description Quality goal sating, In-line, Pre - finial,
and finial Inspection. Buyer
Handle,Haggar, Wool-Worth, Target,
Nautica (Li & Fung), Aldi,
Radhamoni, Mango, VF Asia, Carry
four, Tesco.
2. Name of Organization Vision Group (Savar)
Position Manager Quality
Duration 2012 to 2015 (July)
Working Description QA, QC, Work Procedure, In-line, and
finial inspection, Buyer Handle, Next, C &
A, SRG, H & M, Tema.
3. Name of Organization Palmal Group ( Ashulia)
Position Manager Quality
Duration 2006 to 2011
2. Working Description Quality Control System, In-line, and finial
inspection, Buyer Handle, Gap, Al- Mart,
K- Mart,Target,
4. Name of Organization Lenny Fashion Ltd. (DEPZ)
Asst. Manager QA
Duration 2003 to 2005
Lenny Fashion Ltd. (DEPZ)
Position Management Trainee
2000 to 2002
Working Description Internal audit and finial inspection.
AQL, Sewing quality, an about quality
system, inspection system of - Kohl’s,
J.C. Penny, Sears, and C&A
I gathered about following topics - Cutting, lab (fabric procedure)
(I) Fabric Inspection (ii) Shade Segregation
(iii) Shrinkage Test (iv) Crocking Test (Color
fastness)
(v) GSM Test (vi) Ph Test
(vii) Button test (pull test)
5. Name of Organization Young One (DEPZ)
Position Quality Inspector (1997 to 1999)
6. Education Qualification:
Name of Exam. Passing year Division/ Class Group Board/university
S.S.C. 1990 Second Science Rajshahi
H.S.C. 1992 Second Science Rajshahi
B.A.( PASS) 2000 Second Arts National. University.
3. M.S.S. 2003 Second Class Poli. Science National. University.
Personal Details:
Father’s Name : Late. – Saber Ali
Mother’s Name : Mrs. Azijon Nasa
Permanent Address : Md. Abul Kalam Azad
S/O. Late- Saber Ali
Vill. - Janpur, P/O.- Mominpur,
P/S.- Kotoali, Dist.- Rangpur.
Present Address : Uttar Gazirchat Ashulia DEPZ – Dhaka.
Date of Birth : 20th
March – 1976
Nationality : Bangladeshi (By birth)
Religion : Islam (Sunni)
Marital status : Married
Computer/Internet knowledge : Have
Job Responsibility :
a) Responsible for identification and avoidance potential production problem,
defect, technical problem and provide advice to ensure correct to action is taken.
b) Monitoring production and discuss quality issue resolve any related problem
immediately with factory on daily basis.
c) Responsible for maintaining shipment date as per buyer demand.
d) Follow up new development of sample and ensure the proper sample are submitted
as per the requirements.
e) Knowledge about Quality Controlling process from Development stage to
Shipment.
f) Responsible to ensure quality and shipment with zero defects as per buyer’s
direction.
4. g) The technical & Critical knowledge on garments manufacturing as well as
sampling, inline and final Inspection, day-to-day production follow up.
h) Have to accountable and maintain QCs productivity at optimum level at all time by
close communication.
i) Setting QA/ QC team and ensuring that targets are achieved.
J) Ensuring tests and procedures are properly understood, carried out and evaluated
and that product modifications are investigated if necessary.
k) Ensuring compliance with national and international standards and legislation.
l) Promoting quality achievement and performance improvement throughout the
organization Identifying relevant quality- related training needs and delivering
training.
m) Maintain the factory quality goal to improve the productivity.
n) knowledge about print, embroidery, appliqué & Wash.
o) Train the supervisors to be able to identify where potential problems may occur and
prevent these from happening.
p) Responsible for overall quality assurance. Ensure product quality as per customer
quality standard.
q) Setting up and maintaining controls and documentation procedures.
r) Train fresh & unskilled Quality Inspectors and make them skilled for achieving
quality products at all times.
s) To source and to develop the factory for F.C.C.A (Factory Capacity and
Capabilities Assessment)
t) I also to develop the factory for WRAP (World Wide Responsible Accredited
Production)
u) I did all kind of size set approval/ pre -production meeting/pilot run audits/bulk
cutting authorization procedure/ all kinds of inline inspections/pre-final
inspection/final inspection etc. And doing correspondence with my local office.
5. v) My responsibilities were from sample development stage to till shipment. And I
have been implementing SPC (Statistical Process Controlling) systems the latest
version of QMS (Quality Management Systems) for products quality development
on process wise in sewing line.
w) Fabric receiving record, inspection, shade, G.S.M, blanked/mat, shrinkage
report check.
Collect sample, order sheet, trim card, comments (if any), Approved logo,
embroidery, print etc.
x) Cutting quality report, line qc lay-out, report, first out-put garment/lot check
& wash approval/initial form buyer/self, bulk cutting permission. Production
garments match with gold seal / original sample. Swatch logo, Needle report
etc.
y) Size set making time information, before wash and after wash measurement &
report, pattern correction, pattern grading, Pre-production meeting, Cutting
permission. Information to buying office/qc, for inline inspection.
z) I know in ISO 9001 Quality Management System.
aa) Check finishing lay-out, audit report, pull test, metal test report, lab dip
internal & external audit report, packing poly, ctn. Audit report.
Coordinate with buyer & merchant.
bb) I know about traffic light system also.
A Quality Manager Responsibilities:
cc) Quality Standards. Documents and records are used all throughout the
company. Somebody should know more about quality, compliance and processes.
The Quality Manager need experience with Good Manufacturing Practices (GMP),
ISO standards (i.e. ISO 9001), within a regulated industry are important to
managing and controlling documents and records.
dd) Quality Project Management. A Quality Manager is also a project
manager managing corrective action, process improvement, and auditing projects.
One must have strong self-motivation, the ability to work independently, and within
a team environment with strong follow up, organization and prioritization skills and
6. excellent attention to detail helps too. Perhaps most important of all is
understanding the financial – risk-reward – trade-offs in good project management.
ee) Business Process Documentation. A Quality Manager must be able to
understand, company, and improve established company policies and procedures
Developing standard work, policies, procedures, job aids, and business process
communications are a part of the job. A Quality Manager is also a technical writer.
Familiarity with policy and procedure writing will help you to succeed. Technical
writing conveys technical information using active voice construction, instructional
design, and desktop publishing methods to transfer information into understandable
and useful information.
ff) Document Control. As the Quality Manager, have Knowledge of the
Quality documentation process, Document Control practices and managing
documents, records, forms, and work instructions is vital to maintaining company’s
compliance program. A Quality Manager may be the Document Control Manager
responsible for organizing documents into an easy to use and fast retrieval system.
Users need their policies and procedures to conform to requirements. If we cannot
find them, then we cannot follow them. Document control is an important priority.
gg) Quality Communications. It might go without saying but explaining
business process compliance to others is what a Quality Manager has to do. Being
able to understand a variety of instructions furnished in written, oral, diagram, or
schedule form helps others to follow and conform to the established best practice.
Communicating compliance and conformance is done using software such as
Microsoft Word and Excel, training using PowerPoint, process mapping using
Visio, Statistical Process Control (SPC) using statistics, as well as document
revision control software for policies and procedures management
hh) People Management. A Quality Manager should not be afraid of asking
questions, collecting business process information, and working with others in a
positive and collaborative manner. Business processes include sensitive accounting
and financial too. So, must be comfortable speaking effectively and communicating
directly with all levels of personnel.
ii) Quality Auditing. A Quality Manager performs some of the quality audits.
Supply chain audits, process audits, and may even lead ISO audits an act as a Lead
Auditor managing teams of auditors. Clearly understanding the compliance
requirements, collecting objective evidence, and writing up audit reports ensure the
quality management system is operating effectively.
7. jj) Problem Solving. The Quality Manager solves problems, typically in
situations where general standardization should exist, but may not be operating
effectively. Using process mapping techniques, process improvement methodology
is essential to reducing waste and being effective in the Quality role. A delicate
balance exists between resolving problems and identifying those situations that
require management intervention for a solution. Good political judgment is
required where quality and compliance are concerned.
kk) Team Player. The Quality Manager is involved in teams and meetings at
every level of the organization. Management reviews, material reviews, supplier
reviews, corrective action reviews, process improvement teams, audits, customer
visits and strategy discussions. A good Quality Manager is involved with many
areas of the company.
Main thing – Original QA file, approve pp sample, and approved
trims card. (From buyer).
Others Maintain Report:
P.P. (Technical) Meeting report. & Size set report.
Follow up :- (Maintain)
Cutting Section - > Marker check report.
> Spreading check report.
> Fabric relaxation report.
> Print and embroidery check report.
> 100% cut penal check report.
> Layer control chart report. (With balance cut pcs).
> After cutting hard pattern check report.
> Daily rejection (Re-place) report.
> Fusing Machine, Temperature, speed and Pressure
Check.
Lab section (Fabric)- > Fabric inspection report.
> Shade segregation report.
> Shrinkage test report.
> GSM test report.
> Shade check in mat from (All Rolls Received).
Sewing Section - > Traffic light follow chard.
> 7 Pecs check report.
8. > In-process report.
> Finial table report.(Out put inspection report)
> Audit report.
> First output in-line report.& (Styling check).
> Measurement report.( before lunch & after lunch).
> Heat seal check report.
> Daily rejection report.
> Dias finial report.
> Lot pass report (As per AQL)
> Daily DHU report.
> Needle control log report.
> SPI monitoring report
> Quality line lay out ( Style wise training / instruction).
> Wash test report.
Finishing Section - > Finial table check report. (inside and topside check)
> Gate up check report.
> Finial get-up table key point 100% Measurement report.
> Audit report.
> Metal detector check report.(100% Garments).
> Daily rejection report.
> Pre- finial report (Before finial inspection offer).
> Nickel Test.
> Hourly heat seal report.
> Shade checking.
> Hourly ratio check / inspection.
Store (Quality) - > Accessories, trims inspection report. (10% in receive
quantity).
Top Management weekly Production & Quality
Review Meeting.
Your’s Sincerely