The company commenced its operations in the year 1972 under the guidance of Shri. Shantilal M. Shah who has shown his expertise in handling the market requirements in apt manner through his counted experience. Sangeeta Metal Corporation is a highly acclaimed manufacturer and supplier of all ferrous and non-ferrous metal products like stainless steel pipes, stainless steel tubes, steel flanges, steel butt weldings, steel pipe fittings, etc. The company has carved an unparalleled position in the industry by making relentless efforts to cater to the clients with premium quality pipes, tubes and fitting components.
10. 08
INCONEL 800H
A nickel-1ron-chrom1um alloy having the same basic composition
as INCONEL 800 but with significantly higher creep-rupture
strength The higher strength results from close control of the
carbon. aluminium and titanium contents 1n conjunction with a
higher-temperature anneal Used in chemical and petrochemical
processing in power plants for superheater and reheater tubing in
industrial furncaces and for heat-treating equipments, standard
product forms are round,flats, flats, forging stock, pipe tube, plate,
sheet. strip and wire.
Limiting Chemical Composition %
N1.
Fe...
Cr. . .
c .....
....30 0-35 0
....39.5 min
19.0-23.0
0.06-0.10
UNS NO 8811
Mn........... 1.50 max
S . .......0.015 max
SI........ ...... 1.0 max
Cu. .. ... 0 75 max
ASTM B-163. 8407-8409
8514. 8515,8564
BS 3072. 3074, 3076 (NA15H)
ASME SB-163 SB-407-SB-409
SB-564 Boiler Code
Sections I, VIII
Workstoff Nr 14876
SEW 471
C- 7fl
Al. .. .....0 15.0.60
T1. . .. ...0.15-0.60
AltTi....0.85-1.20
A n1ckel-molyoaenum-chrom1um alloy with an addition of tungsten
having excellent corrosion resistance 1n a wide range of severe
environments The high molybdenum content makes the alloy
especially resistant topitting and crevice corrosion. The low carbon
content m1nim1zes carbide prec1p1tation during welding to maintain
corrosion resistance 1n as welded structures Used in pollution
control chemical processing pulp and paper production and waste
treatment Standard product forms are round, forging stock,tube.
pipe, plate sheet. strip andwire.
Limiting Chemical Compositon, %
N1. Remainder Co .. ..... 2.5 max
Mo 15.0-17.0 Mn .. , ....... 1 0 max
Cr 14 5·16 5 C .... . . .0.01 max
Fe . 4.0-7 o V . .. ... ...0.35 max
w . 3.0-4.5 P ...... .. o 04 max
UNS N10276
ASTM B-574 B-575, B-619
B-622 B-626, B-751
NACEMR-01-75
DIN 17744 17750-17752
ASMESB-574, SB-575. SB-619
SB-622 SB-626, Boiler Code
Section I, Ill.VIII. IX
Werkstoff Nr. 2.4819
S. . .0.03 max
Si....0.08 max
ST L O C-
(UNS N06022; W Nr 2.4602: NiC21Mo14 W) is a fully austenitic
advancedtemperatures.This alloy provides exceptionalresistance
to general corrosion, pitting. crevice corrosion.
chemical/petrochemical processing. pollution control (flue gas
desulfurization1. power. marine, pulp and paper processing, and
waste disposal industries Used 1n pollution control. chemical
processing pulp and paper production and waste treatment
Standard product forms are round, forging stock. tube, pipe, plate,
sheet strip andwire.
Limiting Chemical Compositon. %
N1... ....... .Remainder Cr..... .. . 20 0-22 5 Mo.. 12.5-14 5
Fe..... ... ...... ...2 0-3.5 W . ... ... 2.5-3.5 Co ........ 2 5 max
V. . ...... ...0 35 max C..... .... 0.015 max
Mn . ........ .. .0.05 max S.......... 0.02 max
S1 . ........... .O 08 max P. . ..... .. 0.02 max
UNS N06022
ASTM 8-574, 8-575,B-619
B-622. B-626
DIN 17744 17750
ASME SB-574. SB-575.SB-619 SB-619
SB-622, SB-626
Section VIII Div.I
WerkstoH Nr 2 4602
•Hastalloy is an registered trademark of Haynes International
NICKEL ALLOYS
SM0-254
Avesta Sheffield 254 SMO is anausteniticstainless steel which due
to its high molybdenum contem possesses very high resistance to
pitting and crevice corrosion. The steel grade was developed by
AvestaSheffieldfor use in halide-containing environments such as
seawater. 250 SMO also shows good resistance to uniform
corrosion and especially in acids containing halides. this steel
gradeissuperior toconventionalstainlesssteels.
254SMO is aregisteredtrademark of AvestaSheffield AB.
The high levels of molybedenurn in particular but also of chromium
and nitrogen endow 254 SMO with extremely good resistance lo
pitting and crevice corrosion. The addition of copper provides
improved resistance 1n �fHlain acids. Further more, due to its
relatively high nickel content in combination with the high levels of
chromium and molybdenum 254 SMO possesses good resistance
tostress corrosioncracking.
Limiting Chemical Composition %
Ni............................17.5-18.50 Mn.......................................1.0
M0............................6.00-6.50 Cu..............................0.50-1.00
Cr..........................19.50-20.50 S........................................0.01
p ......................................0.03 Si.......................................0.80
C.......................................0.02 N................................0.18-0.22
E-mail : rinkesh@sangeetametal.com I Website : www.sangeetametal.com
11.
12.
13.
14.
15.
16. Pipes Sheet Round Bar
Fasteners Flanges Fittings
Sangeeta Metal Corporation
An ISO 9001 :2008 Certified Company
Importers, Exporters, Stockists Suppliers of : High Nickel BasedAlloy Metals
5 -A & B, Gr Sabu Bhavan. Ardeshir Dady Cross Lane, Opp. Madhav Baugh Temple,
Near C. P. Tank, Mumbai -400 004.
Tel: 022 - 6651 8567 / 68 Fax: 022 2386 7489
E-mail : rinkesh@sangeetametal.com I sangeetametal@vsnl.net
Website : www.sangeetametal.com
liB
lia