80 ĐỀ THI THỬ TUYỂN SINH TIẾNG ANH VÀO 10 SỞ GD – ĐT THÀNH PHỐ HỒ CHÍ MINH NĂ...
Electrical Lab 2023.docx
1. logS.
No
LAB DESCRIPTION REQUESTED MATERIALS SPECIFICATION Unit QTY.
1 Electrical Engineering
Laboratory I
Bread board: Full size solder less breadboard that has 2 split power buses, 10 columns, and
63 rows - with a total of 830 tie in points. All pins are spaced by a standard 0.1". The two sets
of five columns are separated by about 0.3", perfect for straddling a DIP package over. The
board accepts wire sizes in the range of 20-29AWG.
PCs 10
Digital Multi-meter: UNI-T UT33B+ Digital Multi meter Current, AC, DC Voltage and
Resistance Diode Battery Tester LCD Backlight
PCs 6
Oscilloscope: Hantek DSO2C10 Digital Oscilloscope 2CH Digital Storage 1GS/S Sampling
Rate 100MHz Bandwidth Dual Channel Economical Oscilloscope
PCs 5
Resistor: 1KΩ, 5KΩ,10KΩ, 20KΩ, 50KΩ, 100KΩ PCs 100 from
each value
Power supply cable: Electrical Cable, 220 V, Wire Size: 1Sqmm PCs 6
Standard Signal Generator: Model 645 | 50 MHz Arbitrary Waveform Function Generator PCs 4
Divider: Power socket 5 sockets EU plug, universal plug 10A 2500W extension power socket
power strip
PCs 5
Circuit connector or wires for bread boarding:
Length :20cm
1p-1p pin male to male header
Compatible with 2.54mm spacing pin headers
Package included:1 x 400 tie point solder less breadboard and 1 x A row of 40pcs male to
male jump wire
PCs Quantity: a
row of 40
roots
2 Electrical
workshop practice I
Screw driver: Klein tools (32500),
Klein tools (32581), CMHT65075)
PCs 11 piece in
one pack
4 pieces in
one pack
8 pieces in
one pack
