3. Antenna and Cable Accessories
Company profile
Telestone Technologies Co., Ltd. (hereinafter referred to as “Telestone” or the “company”) is a
leading international supplier that provides wireless communication accessing products and
solutions. It focuses on supplying various wireless communication access and signal coverage
products, application solutions, and wireless communication network optimization services to
wireless communication operators and integrators. The headquarter of Telestone is located in
Beijing, China, and the company was listed on NASDAQ Global Market in 2004, (stock code:
TSTC).
Telestone has consistent focus on research and development which is to maintain the leading
edge in the areas of wireless communication access technology. There are a number of well
established R&D centers and technology service offices set up in Beijing of China and Dallas
of United States.
As a primary access coverage service provider for China Mobile - the largest wireless
communication operator in the world, Telestone has independently researched and
manufactured more than 400 kinds of RF active equipments, microwave active components
and microwave passive components in 8 series, which are widely used in wireless access and
signal coverage projects of China Mobile. Leading technology and reliable quality have been
proved in many years of practice, have obtained a high degree of recognition and trust from
clients.
Base on the strong service culture, and skillful technical force, rich field experience and
efficient problem-solving ability, and to maintain the leading position of Chinese market,
Telestone has supplied the products and services to wireless communication operators and
integrators in over 23 countries since 2005, providing them with comprehensive, localized and
personalized service with high efficiency and quality
Telestone has qualified ISO9000, ISO14000, and ISO18000.
4. Antenna and Cable Accessories
走线架及其铁件 Cable ladder and its accessories
走线架机房安装图
Cable ladder Installation drawing
in a moving cabinet
走线架机房安装图
Cable ladder Installation drawing
in a moving cabinet
5. Antenna and Cable Accessories
铝型材及组件 Aluminium Steel &Assembly
Installation Drawing for Aluminium
steel moving cabinet
9. Antenna and Cable Accessories
避雷器支架 Kit of lightning arrester
一、 产品简介
LAK 系列避雷器支架是严格按照 IEC 有关标准制作的产品,适用于各种类型避雷器的安装,铜排与铜导线
通过浇铸连接,导电性好,接入电阻≤0.336 mΩ,保证了可靠的导电性。该产品整体设计合理,用标准绝缘子
配套,并装不锈钢固定架,最后用螺栓固定于所需位置处。
适用于各种类型避雷器的安排,我公司还可根据用户的特殊需要,设计定制各种避雷器的安装支架。
二、 材料和工艺说明
LAK 系列避雷器支架用 T2 电解紫铜铜排(定点厂家生产)
,材质电阻率小,导电性好,生产中,铜排与铜
导线的连接头是通过浇铸工艺成型的,连接可靠,导电电阻很小,绝缘子采用聚脂树脂原料,绝缘性好,强度高,
所有配件都经过处理,永不生锈。
三、 安装注意事项
1、 细心拆箱,取出避雷器支架及其附件。
2、 根据走线架宽度调整定位角件,并将其紧固于走线架上部。
3、 视避雷器的规格选用相应的角铜固定件,并定位紧固。
4、 顺向拉开接地铜元,按要求定位接地铜元。
I.The Brief Introduction to Product
LAK series kit of lightning arrester is a product strictly according to IEC standard suitable for installing all
kinds of lightning arrester. Copper bars and copper wire is connected through pouring. Electric conduction
function is good and connect resistance≤0.336mΩ,which ensures dependable electric conduction. This
product design is rational, using standard insulator to form complete set, also assemble stainless steel fixing
frame, and at last using bolt to fix in a position you need. Our company will design kit for all kinds of lightning
arrester according to customers’ special demands.
II .Material and Technique Illustration
LAK series kit for light arrester use T2 to break down pure red copper bars (produced by fixed factory),
and the material has little resistance and good electric conduction. During working, the connection of copper
bars and copper wire is through pouring to make shape. .Resistance is very little. Insulator is made of
polyester and plastic material, and insulation is good. All its accessories are never rusty through processing.
III.Installation Attention Item
1. To be careful to open box, take out kit for lightning arrester accessory.
2. According to cable ladder’s width, adjust directing angle and fix it upon the cable ladder.
3. According to the specification of lightning arrester, choose relevant fixing complement also fasten it.
4. Open copper grounding and according to the demand to fix it.s
避雷器支架 Kit of lightning arrester 避雷器支架 Kit of lightning arrester
10. Antenna and Cable Accessories
室内外接地卡及接地装置
Indoor and outdoor grounding kit and grounding device
室内外接地卡作保护馈线及设备之
用,防止雷击造成设备损坏。用不锈
钢及紫铜排制作,表面经镀银或镀锡
处理,接地效果极佳。电阻值,阻抗
值等均符合有关要求。
Indoor and outdoor grounding kit is
used for protecting feeder cables and
equipments and preventing the damages
of equipments from lightning stroke. It is
made of stainless steel and red copper
bar. Its surface is treated through
silver-plating and tin-plating. Grounding
result is very good. Resistance value and
impedance value, etc, are all in
conformity to the related requirements.
11. Antenna and Cable Accessories
室内外接地卡及接地装置
Indoor and outdoor grounding kit and grounding device
12. Antenna and Cable Accessories
馈线卡具 Feeder Clamp
挂勾型馈线卡具
Hanger type feeder clamp
漏缆型馈线卡具
Cable leaky feeder clamp
抱箍型馈线卡具
Hoop type feeder clamp
穿芯型馈线卡具
Cable through type feeder clamp
14. Antenna and Cable Accessories
馈线密封窗
FIXING SPECIFICATION FOR WALL ENTRY PANEL
一、产品简介
馈线密封窗专用于各种尺寸规格馈线进入基站室内时的密封。它能有效的防风、防雨、防
漏,确保室内各种设备不受外界气候的影响,能同时接入几十根馈线。由于该系列产品采用了
铝镁合金外加喷塑涂层,因而美观轻盈,经久耐用,是馈线穿墙的理想产品。
二、 材质和工艺说明
馈线密封窗面板选用铝镁合金为基材,经落料、冲压、拉伸、精整、铆接成型。有强度高、
外表美观、耐老化的特点。馈线密封圈则采用专用防老化橡胶材料,能有效防酸碱的腐蚀,紫
外线的照射,另配不锈钢喉箍。箍紧力大,均不产生锈蚀现象,达到了长久美观、耐用的效果。
三、安装注意事项
(1)基站装修时先预留一个合适的孔洞,具体尺寸如下:
序号 密封板规格 外形尺寸 (mm) 预留孔洞尺寸(mm)
1 2孔 400×200 240×120
2 4孔 400×400 240×240
3 6孔 390×540 240×380
4 9孔 500×500 380×380
5 12 孔 540×640 380×510
(2)将密封板用膨胀螺丝直接固定于预留孔洞上;
(3)在密封板四角涂上 703 防水硅胶,效果更好.
四、馈线密封窗安装示意图
I、 Brief introduction for product
It’s widely used for sealing various cables which enter base station. The user can connect
a lot of cables at one time. It has good weatherproof performance. It can protect various
equipments in base station from the influence of the climate. The series product have the
feature of light weight, beautiful appearance and durable characteristics because of using
Al-Mg alloy and spraying plastic. It’s an ideal product for cable entering the wall.
II、 Material and technique illustration
Product Parts Material features
Panel Al-Mg alloy high intensity, beauty appearance and
durable
Cable sealed ring Anti-aging rubber Acid-resistant, alkaline-resistant,Anti
ultraviolet
Throat hoop Stainless steel Big clamp force and no corrosion
Technique process: Cut→Punch→Pull→Refinisher→Riveted
15. Antenna and Cable Accessories
III、 Attention for fixing
A)A right hole should be dug when the base station was built. The hole size as follows:
SN Seal panel spec. Outer dimension (mm) Beforehand hole size (mm)
1 2 hole 400×200 240×120
2 4 hole 400×400 240×240
3 6 hole 390×540 240×380
4 9 hole 500×500 380×380
5 12 hole 540×640 380×510
B)Sealed panel directly fixed in the beforehand hole with the expansion bolt.
C)It’s better for spreading #703 water-resistance silica glue on the four corner of sealed
panel.
IV、 Fixing illustration for wall entry panel :
Feed cable sealed panel
馈线穿墙密封底板
Various sealed parts
各类密封件
Throat hoop
紧固喉箍
平板密封罩
Panel airproof cover
M8 expansion bolt
M8膨胀螺丝
Outer wall
墙外
图一