1. RESUME
Ullas Hasyagar(BE-Telecommunication)
Contact: - +919741003939
Mail: - ullashasyagar@gmail.com
Career Objective:
- Currently looking for a full time position in an environment that offers a greater challenge
in analog/digital circuit designing and Process Instrumentation and the opportunity to
help the company.
Career summary:
Company: Integer systems Bangalore (Authorized channel partner YOKOGAWA process
Instruments)
Position: R&D engineer (Electronics/process instruments)
Period: 2010 Aug – Present
Duties:
- Completed projects on Analog and Digital communication techniques circuit
designing.(AM,FM,ASK,FSK,DPSK,QPSK,PCM etc)
- Completed project on Embedded system hardware circuit designing(ARM
LPC2148,8051,PIC16f877 )
- Completed Process instrumentation and data acquisition system project in KPCL
Gerusoppa.
- Completed Process instrumentation and data acquisition system project in SKF Bangalore.
Key Skills:
- Strong knowledge in analog and digital circuits design and development.
- Strong knowledge in YOKOGAWA Field mate HART communication software for
calibrates the process instruments (YOKOGAWA and 3rd party pressure transmitter).
- Strong knowledge in YOKOGAWA GA10 software.(DAQ) and GX20 recorder.
- Strong knowledge in using CRO, Multimeters and other instruments.
- Knowledge in GLOBE control valve and JUMO pressure sensors.
- Strong knowledge in AUTONICS pulse meter and Leuze electronics proximity sensor.
- Strong knowledge in OP-AMP(comparator,amplifier,buffer etc), ADC/DAC,
MUX/DEMUX, ENCODER/DECODER, Digital gates,CODEC,Fixed and variable power
supplies,Transistors,High frequency clock and sine wave generation, Flip Flops.
- In depth knowledge in signal modulation and demodulation.
- Strong soldering knowledge for thru hole and SMD components.
- Basic knowledge in embedded C programming.
- Knowledge in RS232 and RS485, Ethernet, 4-20mA communications techniques.
- Knowledge in PID controllers, recorders, indicators, RTD, Thermocouple, sensors etc.
Area of interest:
- Interface 3rd party devices to YOKOGAWA GA10 through DDS file generation and
MODBUS configuration.
- Hobby projects circuit design.
- Agriculture Motor on/off control using Timer control/GSM control/RF control
- Designing LED emergency lights

2. - Simcom GSM module configuration through AT commands.
- PIR sensor, gas sensor, Flex sensor, Temp sensor, DTMF encoder/decoder interfacing with
different controllers.
- Making Academic projects for engineering and diploma students
Computer skills:
- Operating system:-Windows 7, and Windows-XP (also know OS installation)
- MS office:-MS word, excel, PowerPoint.
Academic qualification:
Sl.
No
Course University Year of
Passing
% of Marks
1 B.E (Telecommunication
Engineering)
Visveswaraiah
Technological University
2010
63.77%
2 Diploma in Electronics &
Communication Engineering
Department of Technical
Education Bangalore 2007 70.46%
Key Projects Handled:
1. Human detection robot with GSM control.
Description GSM controlled robot detects if any alive body under earthquake buried buildings
and sends alert SMS to cell phone .
Role Circuit designer, Tester
Team Size 2
Tool Used 1.Keil 4
2.Flash magic
Components 1.SIM900 GSM module, PIR sensor, DTMF decoder, LCD, Cell phone, L293D
motor driver
2. University Lab demonstrator kit
Description 1.Traffic light demonstrator
2.Message writing on LCD using keypad.
3.Changing stepper motor speed and direction
4.DC motor speed and direction using PWM technology.
5. single phase motor ON/OFF using relay and switch(with timer function also)
6.ADC0804 demonstration using 8 LED and 0-5V DC variable pot.
7.High frequency Sine/Square/Triangle waveform generation using DAC0800.
Role Circuit designer, Programming.
Team Size 2
Tool Used 1.Keil 4
2.Flash magic
3.CRO(analog and digital)
4.DMM
Components 1.LED, LCD(16x2 and graphical), Stepper motor and driver, Relay, ADC/DAC,
LM35 temperature sensor, DC motor etc.

3. 3. 2 Wheeler locking/anti theft alert system(SMS based)
Description GSM module which is in two wheeler can store owner mobile no.
If we send an SMS “LOCK” then Ignition system will deactivate and Gear motor
which is fixed in kicker will activate and disables the function of kicker.
If it is in LOCK mode then proximity sensor detects any movement of wheel it
will send an alert SMS to owner cell phone continuously.
If we send an SMS “UNLOCK” then ignition system and kicker function will
activate.
Role Circuit designer, Programming. Testing
Team Size 1
Tool Used 1.Keil 4
2.Flash magic
Components 1.GSM module
2.Proximity sensor
3.Gear motor
4.LPC2148 ARM controller university lab demonstrator kit.
Description 1.LED interface with different patterns flashing
2.Message display on LCD
3.BCD to & segment decoder (7447)and counter using push button and 7
segment display
4. PWM wave generation and interface to DC motor for speed variation.
5. Stepper motor interface with driver (ULN2803) speed and direction changing
option.
6. Actuating relay and buzzer using transistor driver.
7.12V DC, 5VDC and 3.3VDC generation using regulator from adaptor supply.
Role Circuit designer, Testing
Team Size 2
Tool Used 1.Keil 4
2.Flash magic
Components 1.LED,LCD,Stepper Motor, DC motor, Buzzer, Relay, Segment display
LM1117, 7805. 7812 voltage regulators.
5.PLC based conveyor control
Description Designed as 5 motors interlocking. The motor should on one after another.
The proximity sensor was placed at conveyer belt. If belt slips the motor should
trip.
Role Ladder programming, project design.
Team Size 2
Tool Used KGL-WIN
Components LSIS master K 8x6 PLC
Leuze electronic proximity sensor.
6.Analog and digital communication university lab trainer modules.
Description Designed AM,FM,ASK,PSK,DPSK,QPSK,PAM,PWM,PPM,SSB,PCM
modulation and demodulation techniques using different ICs,crystal
oscillators,Resistors,capacitors,diodes,transistors etc. The graph is plotted in
CRO.

4. Role Circuit designing, Testing.
Team Size 2
Tool Used Orcad Capture CIS.
Components CRO,DMM, Crystals, OP-AMP, Timers, MUX/DEMUX, Counters ,Flip/Flops,
Digital gates, Buffers, Regulators etc.
7. Fiber optic and LASER communication university lab trainer kits
Description Designed Fiber optic communication technique that is multiplexed analog signal
transmission, Digital signal transmission, Real time voice transmission, PC to PC
data transmission via fiber optic link.etc.
Role Circuit designing, Testing.
Team Size 2
Tool Used Orcad Capture CIS.
Components CRO,DMM, Crystals, OP-AMP, MUX/DEMUX, Counters ,Flip/Flops, Digital
gates, Buffers, Regulators, MAX 232, FO LED, Photo transistors, Thin glass
fiber optic cable etc.
8.Data Acquisition using YOKOGAWA GX20 recorder and GA10 software (KPCL
Gerusoppa)
Description Logging RTD readings to Recorder and 8 recorder readings are multiplexed
through a Ethernet switch and log to PC using GA10 software.
Logging Schneider EM6436 energy meter readings to PC using GA10 and
MODBUS configuration software Using RS485 communication MODBUS
address.
Role Recorder configuration, Software configuration.
Team Size 3
Tool Used GA10, MODBUS configurator,Hardware configurator etc.
Components YOKOGAWA GX20 recorder, Pt100 RTD, Schneider EM6436 energy meter
MOXA RS485 to Ethernet converter card.
9. Data Acquisition using YOKOGAWA GX20 recorder and GA10 software (SKF Bangalore)
Description Logging RTD and Thermocouple readings to Recorder and recorder readings are
log to PC using GA10 software.
Logging Oxygen meter readings to Recorder.
Logging Frequency meter readings to recorder.
Logging AUTONICS pulse meter readings to recorder using 4-20mA
retransmission.
Alarm Messages of recorder are sent as SMS to authorized person mobile.
Role Recorder configuration, Software configuration, Leuze electronic proximity
sensor installation, Pulse meter configuration, GSM module configuration.
Team Size 3
Tool Used GA10, MODBUS configurator, Hardware configurator etc.
Components YOKOGAWA GX20 recorder,Pt100 RTD, J and K type thermocouple,
AUTONICS pulse meter, Proximity sensor, Cellcomm GSM module etc

5. Personal details:
- Languages known: Kannada, English, Hindi.
- Date of birth: 2nd June 1986.
- Marital status: Married
- Communication Address: #3,C/O T V Manjunath, Tagachaguppe, kumbalagodu post,
Kengeri hobli, Bangalore 560074.(INDIA)
- Permanent Address: S/o V M Hasyagar, At Kallalli, Po Manjuguni, Tq Sirsi, (Uttara
Kannada), 581315
Declaration:
I hereby declare that the above furnished details are true up to my knowledge.
Place: Bangalore
Date: Ullas Hasyagar