2. American Contractors Corp., formerly known as
American Acoustical, is a New England
subcontractor that has been specializing in
standard and custom architectural acousticalstandard and custom architectural acoustical
ceilings and wall systems since 1998.
Did you knowDid you know…
ACC is not just another acoustical ceiling
contractor.
ACC designs, fabricates, furnish and installs quality
manufactured custom architectural metal products
on time and with the upmost quality?p q y
3. Our custom metal fabrication
capabilities reduce cost & lead time.capabilities reduce cost & lead time.
◦ CAD and 3D modeling for design and approval of
shop drawings
◦ Custom Sample and Mock ups
◦ CNC Laser Cuttingg
◦ CNC Turret Punch Pressing Processing
◦ Sheet and Plate Forming
◦ Welding and Spot WeldingWelding and Spot Welding
◦ Finishing and Plating
◦ Powder Coat and Wet Paint Processing
4. ◦ Perforated Ceilings
◦ Ceiling CloudsCeiling Clouds
◦ Metal Wall Panels
◦ Trims and Reveals
C l C◦ Column Covers
◦ Trellis and Grid Structures
◦ Lab Floor Trough SystemsLab Floor Trough Systems
◦ Enclosures
◦ Light Boxes
A hi l HVAC G ill d V il i P l◦ Architectural HVAC Grills and Ventilation Panels
◦ Architectural Railings
◦ Decorative Art and Signageg g
12. 12345678
D DGrain Direction, Typ.
18.00
Holes for Screw
Securement
44.00
110.00
(9 ft 2 in )11.50
DETAIL B
A
C C
42.00
at Seam
(9 ft. 2 in.)
31.50
10.50
DETAIL B
SCALE 1 / 4
B
B B
6.00
36.50
Bottom
Cutout
38.50
Filler Panel Seams
at Sides
Mounting Tabs (along one side of
each panel) for securement to
Shroud Assembly
Exploded View, Ref.
(some mounting detail not
shown in this view)
6.00
NOTES:
1. ALL DIMENSIONS TO BE VERIFED IN FIELD (V.I.F.) BY
AMERICAN CONTRACTORS.
2. ALL PANELS TO BE 16 GA. 304 SSTL #4. REFERENCE APPROVED
SAMPLE SUBMITTAL TIB 095100-0008-0.
3. UPPER FILLER WRAP HEIGHT AS NEEDED TO FILL
TO CEILING.
Top
Cutout
Tapered Pin
Locator Hole
Mounting Tab,
Note 4
each panel) for securement to
framing
Rev C 8/22/13: Change top filler panels to same design
and mounting as all other wrap panels.
Overall Height set at 110 in. (9 ft. 2 in.).
Rev B 8/19/13: Add Sheet 2 Plan View with Stove Area,
Add grain direction, enlarge width of top
filler panel, Add mtg. holes at edge of filler
panels. (D. Frazier
Rev A 8/13/13: Change to three-panel diameter; add
12345678
A A
SHEET 1 OF 2
DRAWN
CHECKED
QA
MFG
APPROVED
D. Frazier 7/30/2013
DWG NO
TITLE
Wrap Around Shroud Assembly
SIZE
D
SCALE
American Contractors
REV
C
O C G
4. MOUNTING TABS ARE LOCATED ALONG SIDES OF PANELS AND
BOTTOM AND TOP EDGES OF SHROUD ASSEMBLY. PITCH SHALL
BE DETERMINED ACCORDING TO FRAMING STRUCTURE.
5. LOCATOR PIN AND HOLE ARRANGEMENT SHALL BE ALONG SEAM
BETWEEN UPPER AND LOWER PANELS.
6. ALL FRAMING BY OTHERS. View A
Tapered Pin,
Note 5
Tab and Slot arrangement
along opposite side of each
panel
Edge Securement Detail
(Typical)
cutout dimension details; add mounting
tab and pin/hole detail views; add note
details. (D. Frazier)
12345678
16. In 2012 American Contractors was awarded In 2012 American Contractors was awarded
the Gold Award for CISCA in the category of
Interior Finishes and Silver in the category ofg y
renovations for the Logan Airport Terminal C
project.
