This document outlines an IoT-based patient health monitoring system. It discusses how such a system could be used to continuously monitor critical health parameters like blood pressure, heart rate, and temperature for patients in ICUs or with chronic illnesses. The system would use sensors to collect this health data and transmit it over the internet using devices like ESP8266 and Arduino, allowing doctors to remotely monitor patients without direct physical presence. It proposes a block diagram of the system and discusses how it could help reduce workload in hospitals while enabling health monitoring from anywhere at any time.

2.  Guide. Presented by
prof. Akbar nagani sir. Ashfaque Ansari (35).
Etc department Samreen Pathan(49)
Acet, nagpur pranali Rangari(49)
shrusti
Chourasiya(15)
Jayshri gharde(46)

3. Outlines
 Introduction
 Literature defination
 Problem defination
 Research objective
 Research methodology (flow chart /block diagram)
 Application

4.  With the development of world, health monitoring system is used every field such as
hospital, home care unit,sports.this health monitoring system use of chronicle
diseases patients who have daily check-up. Normally it is difficult to keep track on
abnormalities in heartbeat count for patient itself Manually. The average heartbeat
per minutes For 25 years old range between 140-170 bpm while for a 60-year old it is
around between 115-140 bpm and body temperature is 37° celcius or 98.6°fahrenheit.
Patients are not well versed with manual treatment which doctors normally use for
tracking the count of heartbeat. There are various instruments available in market
to keep track on internal body changes.

5. 1) Mr Alam “IoT based patient health monitoring using ESP8266& Arduino”[June 11,2019]
2) Engr fadhad”IoT based patient monitoring system using esp8266, Arduino &Android Bluetooth App”[August 31,2019]
3) In this paper we have learnt about the alternative of python Compiler for IoTgecko applying computer vision

6.  For such critical condition the doctors need to have An all time update patient’s
health related parameters like their blood pressure,heart pulse and temperature. In
this way IoT based icu patient monitoring system that helps in monitoring icu
patient without any manual inTervention.
 The output from senior and amplifier circuit was connected to the arduino.the
observed output signal was periodic ac signal with amplitude varying from peak to
peak according to person.

7.  Using iot patient health can be easily monitored over the internet. The doctor does
not need to present every time and everywhere with the patients. There health
status can be easily monitored over the internet using iot. Iot Monitoring proves
really helpful when we need to monitor & record and keep track of changes in the
health parameters of the patient over the period of time.

8. Block diagram

9.  1. This IoT based icu patient monitoring system could be installed in hospitals icu
room for measuring the temperature and blood pressure of patient body constantly
 2.this system could be also used for measuring the heart beatrate of patient body.
 3. By using this system, the main power in hospitals could be reduced.
 By using system, the patient body temperature and blood pressure could be see any
time from anywhere.

10. 1.Mr Alam “IoT based patient health monitoring using Esp8266& Arduino” [June
11,2019]
2. Engr fadhad “IoT based patient monitoring system using esp8266, Arduino
Bluetooth app “[August 31,2019]

11. THANK YOU