Checking and changing the battery on a Garmin GPSmap 62

1. Exercise 1
Changing the battery on a Garmin GPSmap 62

2. This is an
interactive
game!
oClick on the correct part or the correct
selection to advance.
oDon’t worry about making a mistake, as
you can always return and try again.
oHint: clickable areas are labelled, and
names may help indicate what they do.
oYou will be returned to this screen if you
click incorrectly at first. Try again if you
do!

3. The battery
may need
changing.
Click on the
proper
button(s) to
check battery
life.

4. That’s one
way to do
it…….....
but it’s not
the best
way.
oYou can use either the PAGE or
the QUIT Button to cycle the
main screens.
oThey act as “forward” and
“back” buttons respectively to
change main screens (remember
this for later)
oA battery indicator can be found
on the LOCATION/UTM screen.
oHOWEVER, the BEST way to
check battery (and other
aspects) is to quickly hit the
POWER button.
oClick here to go back and try
again.

5. Correct!
oThe best way to check the
BATTERY level very quickly
is by quickly hitting the
power button!
oYou can also use this to
check:
odate and time
obacklight settings
oGPS signal strength
oNote: you PRESS AND
HOLD the power button to
turn the unit on and off.
oClick to continue….

6. You need to
change the
batteries.
How do you
access the
battery
compartment?
Click the right
place to do so.

7. That is the
USB Port!
We as searchers
will not be using
this in the field.
Click here to
return…

8. CORRECT!
To open,TWIST
the D-Ring ¼ turn
counterclockwise
and pull up.
Congratulations
you are done and
the password is
GLOBAL