1. Timothy J. Jones
5300 S. Maple Ave.
Broken Arrow, OK 74011
(918)313-2706
TimJonesInspectionServices@gmail.com
Summary:
I had been employed with Sherry Laboratories (now Element Broken Arrow) since September 2006, first as a Mechanical
Testing Technician. Then in November 2009 I began to serve additional duties as an AWS CWI. These responsibilities
were increased to include other non-destructive testing, technical customer service, final review of testing plans and
detailed instructions for the machinists and technicians involved, and review/reporting of testing results as an approved
signatory. The material specifications and weld codes that I worked with on a daily basis include (not limited to) ASME
BPVC Sections I through X, ISO PED including the NACE and BS EN codes, AWS Section 5 & D1.1 through D17.1, CSA,
ASTM.
Update: Left Element Materials Technology for SGS Pipeline Integrity Services - North America in early January to work
as a field agent Certified Welding Inspector, Authorized Inspector, and NDT Tech, and was laid off beginning the first of
March, 2015.
Certification:
American Welding Society: Certified Welding Inspector, Certificate #09110611
Expiration Date: 11/15
Verify at www.aws.org/w/a/certification/search
American Society for Nondestructive Testing: ACCP Level II, Certificate/ID #223110
Expiration Date: 11/18
Method: Liquid Penetrant Testing
Sectors: General Industry and Pressure Equipment
Techniques: Post-emulsifiable, Solvent-removable, Water-washable
Verify at www.asnt.org/certificant
Education:
Associates Degree in Mechanical Engineering, Tulsa Community College; May, 2003
Cumulative G.P.A.: 3.4
Associates Degree in Mathematics, Tulsa Community College; May, 2003
Cumulative G.P.A.: 3.4
Bachelor of Fine Arts, University of Oklahoma, Norman; May, 1999
O.U. Ret. G.P.A.: 3.34
Additional Certification and Training: ASNT Level I & II, to the requirements of ASNT SNT-TC-1A
✓ Magnetic Particle Testing (MT), certification of satisfactory completion of training from SGS
✓ Radiographic Film Interpretation (RT), certification of satisfactory completion of training from Globe X-ray
✓ Liquid Penetrant Testing (PT), certification of satisfactory completion of training from Globe X-ray
Documents are available upon request
• ASME Metallurgy for the Non-Metallurgist
• Fischer Feritscope for measuring ferrite number and ferrite % of welds and base materials
• Fisher Sigmascope for measuring conductivity (%IACS) of non-ferrous metals
• Mic 10 Krautkramer for portable measuring of Vickers hardness
• SPI Surface Finish Comparator for measuring surface finish (Ra micro-inch)
• Calipers, Micrometers, and 20X Optical Comparator for checking dimensional measurements
Destructive Testing Experience:
Fasteners, to F606 J429 and MIL-STD Brinell and Rockwell Hardness
Tensile (metals and non-metals) Charpy V-Notch Impact Toughness
Tube to Tubesheet Shear Nick Breaks (API 1104, EN, ISO)
Bend (weldments, forged specimen, coatings v. substrate) Fillet Fracture
Peel and Section for Brazing Shear (double, single, and lap)
Tubular Products (flattening, flange, flare, bend, reverse bend, tensile, & CVN)
See my CV for a more detailed view of my experience and skills.