1. Page 1
AHMED MOHAMMED ISMAIL
SR.QA/QC (WELDING - PIPING - NDT)
Home Phone  002 066 3331892
Current Mobile  00966548037134/ 002 01154620008
Email Address  ahmed_portsaid2000@yahoo.com
 a.portsaid2000@gmail.com
Date of Birth  11 / 12 / 1979
Nationality  Egyptian
Religion  Islam
Driving License  valid Saudi License
Military Service  Finished
O B J E C T I V E S
To work in a professional environment that will allow me to utilize and refine my skills and
knowledge, so that I may contribute to the growth and success of the organization.
E D U C A T I O N
» Diploma in Mechanical Engineering - Welding Dept.
QUALIFICATIONS
» ASNT Level II in Magnetic Particle Testing (MT)
» ASNT Level II in Radiographic Testing (RT)
» ASNT Level II in Dye Penetrate Testing (PT)
» ASNT Level II in Ultrasonic Testing (UT)
» CSWIP 3.1 WELDING INSPECTOR No. : 33640
» CSWIP 3.2.2 SR. WELDING INSPECTOR.
» ARAMCO SAP No. : 70009537
S U M M A R Y O F E X P E R I E N C E
12 Years of Experience as a Mechanical Inspector / Engineer in Gulf and Egypt.
Inspection and Execution of site welding, Piping & nondestructive testing such as
radiographic test, ultrasonic test, magnetic particles test and dye penetrant test.
With Ability to read, review and implement work on site.

2. AHMED MOHAMMED ISMAIL
Page 2
W O R K E X P E R I E N C E S
Mechanical QA / QC SUPERVISOR El-SEIF Eng’g Contracting Co. Ltd.
Dec. 04, 2011 - present
Project Name: Haramain High Speed Rail KAEC Station (S3)
Client : Saudi Railways Organization (SRO)
Mechanical QA / QC Engineer Consolidated Contractors Company (CCC).
Jan. 02, 2010 – Feb. 27, 2011
Project Name: Princess Noura Bent Abdul Rahman University for Women (PNUW)
QA / QC Engineer Consolidated Contractors Company (CCC).
Sept. 16, 2008 – Jan. 01, 2010
Project Name : Khursaniyah Gas Plant (KGP)
Main contractor : BTJV (BECHTEL & TECHNIP)
Client : Saudi Aramco
QA / QC Engineer ThyssenKrupp Xervon Energy.
April 16, 2007 – July 15, 2007
Project Name : Benghazi North Power Plant ( Shutdown )
QA / QC Engineer ThyssenKrupp Xervon Energy.
Jan. 15, 2007 – April 15, 2007
Project Name: Derna Unit 5 Power Plant ( Shutdown )
Welding Inspector & RT Interpreter Egyptian natural gas co. (GASCO).
May 10, 2006 – Jan. 10, 2007
Project Name: Dahshor – Elkorimat Pipeline 36” (90 km.)
QA/ QC Engineer ThyssenKrupp Xervon Energy .
Nov 1, 2005 – Mar. 30, 2006
Project Name: Tobruk Unit 4 Power Plant ( Shutdown )
QA / QC Engineer ThyssenKrupp Xervon Energy .
June 1, 2005 – Oct. 1, 2005
Project Name: Tobruk Unit 5 Power Plant ( Shutdown )
Fabrication & Welding Inspector International Company for Manufacturing
Boilers & Steel Fabrications (IBSF).
Aug. 23, 2004 – April 13, 2005

3. AHMED MOHAMMED ISMAIL
Page 3
D U T I E S :
WELDING & PIPING INSPECTOR
Duties of the welding inspector before, during and after welding, including but not limited to:
 Identify and prepare Welding Procedure Specification (WPS), inspections of prepared
test specimens and witness destructive tests during procedure qualification testing (PQT).
 Participates as a member of a team in the formulation and implementation of the
company and the client Quality Assurance/Quality Control policies and procedures
 Selection of the most appropriate welding process (SMAW, GMAW, FCAW, etc.) to
achieve the desired quality with the lost cost within the project time schedule.
 Deep experience in the different welding applications and processes and different
ferrous and nonferrous alloys.
 Welder Qualification with Conformance to the applicable codes and standards.
 Verifying that Welders at job site are meeting PQR requirements.
 Monitor Welder performance and conduct visual inspections of welds and repairs of
welds in accordance with Company procedures and international codes of practice.
 Monitor the construction process from all aspects to ensure performance meets job
quality and design requirements in accordance with Company procedures and
international standards.
 Pre-weld inspection & Verification that joints Fit-up and weld preparations are in
accordance with the engineering drawings and meeting requirements with relevant codes
and standards.
 Verification of Welding consumables used at job site is meeting the requirements of the
approved welding procedure specification (WPS .(
 Dimensional check of completed weld against specification requirements and drawings.
 In-process surveillance during welding to verify compliance with specified procedure
including any preheat, inter-pass temperature control and post heat requirements.
 Participates throughout Company in both quality and technical audits.
 Perform internal Welding Audits to identify opportunities for improving product quality.
 Raise Non-Conformance Reports (NCRs) and Deviation Reports (DRs) when
 Activities deviate from the Contract Specifications or normal Construction practices.
 Preparing the weekly QC report that showing the weekly progress that has performed
by the QC Dept.
 Maintain daily log of Welding activities and repairs.
 Witness to the Welding/Brazing Procedure Qualification Records (WPQR/BPQR) and
Prepare the Welding/Brazing Procedures Specifications (WPS/BPS) for Process Piping,
Power Piping, Steel Structural, Pipe Lines.
 Assessing the condition of welding consumables which may be found to be damaged on
receipt and decide whether to accept/reject or recondition as appropriate.
 Preparation / review of punch list and test packages prior to hydro static testing.

4. AHMED MOHAMMED ISMAIL
Page 4
Non - Destructive Examination (NDE)
 Performance, interpretation and evaluation of the results for the following Non-Destructive
Exams
Ultrasonic Examination
 Ultrasonic inspection and Interpretation of welds.
 UT Procedure preparation and report writing with conformance of the applicable code and
specification
 Thickness Measurements and lamination Detection using A-Scan equipment.
 Dealing with different UT (Calibration and DAC) Blocks such as IIW V1, IIW V2, ASME &
AWS Base Metal DAC Block …etc.
Radiographic Examination
 RT Procedure preparation and report writing with conformance of the applicable code and
specification.
 Radiographic film interpretation for all configurations welding, casting and forging.
 Dealing with radioactive isotopes in case of emergency, preparation of emergency plan and
supervision on its application.
Magnetic Particles Examination
 MT Procedure preparation and report writing with conformance of the applicable code and
specification.
 Dealing with the different MT equipment and calibration blocks
Dye penetrant Examination
 PT Procedure preparation and report writing with conformance of the applicable code and
specification.
 Conducting PT test for different type of materials.
B E H A V I O R S K I L L S :
Flexible & Creative Mentality.
Hard worker and Self-motivated Personality.
Ready to work under any means of life conditions both among teams and independently.
I hereby certify that the above information is true and correct.