2. Improve Your Bottom Line
Increase Operational Efficiency
Protect Your Cargo
Master Control Unit TrackPoint AT
Our flagship tracking unit, solar Our premium micro tracking unit,
powered, wireless sensor network, instant small , discrete, real time GPS locations,
location request, and 7 to 10 year battery quick 5 minute installation.
3. Master Control Unit
Features
• Total Solar Recharged Battery Operations
• Patented Power Management allows TrackPoint to
squeeze the more power life out of the battery
while still allowing robust real-time data
transmission
• No connection to tractor or trailer for power
• Wireless sensors – load status, trailer doors,
temperature, fuel capacity, and more
• On-board Geofencing to prevent and report
unauthorized movement of trailers
• GSM/GPRS offers lowest power, lowest cost data
transmission available
• Easy 15-minute self-installation - no wiring,
alterations, special skills or tools needed
• Real time trailer, identification, location and
automatic load status notification
• Customer-defined automatic alerts for violations
• International roaming available on all devices
• Simple-to-use web application
• Mapping and historical reporting of trailer
activities
4. TrackPoint AT
This unit comes in a battery powered model and a hardwired version.
• Revolutionary low-power “Dynamic Motion
Sensing” (DMS) mode allows the device to
changes its own configuration to send fewer
messages when stopped and more frequent
messages when in motion
• Lower overall power consumption, allowing
more messages and better response times
• Two Way Communication- programmable over-
the-air
• Small profile (9.5” x 3.75” x 1.25” and easy tape-
mount or screw-mount installation
• Customer-defined automatic alerts for
violations
• International roaming included
• Simple-to-use web application for access to
data and battery status
5. WebConnect
Easily see your current trailer status all on one page.
Trailer number, date/time of report, nearby street address, your familiar yard and customer
names, operation mode as well as easily request an updated GPS position.
6. See Your Fleet At a Glance
Easily see where your entire fleet is at once.
Red trailers are STOPPED currently
Green trailers are MOVING currently
7. Breadcrumb Tracking – EVEN into Mexico and Canada
Accurate tracking across the border when having remote visibility matters most. Add even more
security with our door and cargo sensors. You can add further peace of mind with our text
message alerts. When your doors open or close you can be alerted directly to your cellphone.
8. Dispatcher’s Secret Weapon
Type in the address of your pickup
ZOOM out
until you locate the closest empty trailer.
9. Yard Check Report
See how many trailers are sitting on your yards and your client’s yards.
Drill down and see exactly which trailers are there.
10. Idle Trailer Report
If it’s not moving, it’s NOT MAKING YOU MONEY.
Now your dispatch team can see idle trailers and get them productive!
11. Accuracy, it is in the details
No more driving around a yard looking for a trailer.
Use our detailed mapping feature to show exactly where trailer assets are located.
12. Change reporting behavior over the air.
Your tracking device will immediately respond!
Report Mode Options:
the unit reports gps location as often as you want while its moving, then when it stops, it will report
the stop transition message and wait for the next trailer movement before reporting again. (If your
trailer doesn’t move for 24 hours, it will report once a day to “check-in”).
an immediate gps location
request
(example 4am, 10am, 3pm)
(example reports every 2 the unit ONLY reports when it
minutes , 30 minutes, 2 has been moved and can be
hours, etc) setup to alert your cell phone
via text or your email.
13. Notes and Reminders
Create your own reminders and notes about certain trailers.
IE: scheduled trailer maintenance, high value loads, pick up times, etc
This is a totally customizable field for your team to enter information into.
14. Alerts straight to your cellphone!
Your tracking device will immediately respond and send important alerts to your cellphone.
Never Miss an Important Alert Again.
With our alert system we can send real-time data
straight to your cellphone.
Alert types:
• Rising or Falling temperatures
• Door Open or Shut
• Cargo full or empty
• Asset movement (started moving, stopped moving)
• Unauthorized pickup
16. Cargo Sensor
Results-focused information
Real-time data allows you to maximize your trailer turns, increase utilization, and
document trailer detention. Know within minutes when a trailer goes from full-to-empty
or empty-to-full and help secure against loss and theft – increase margins while
minimizing risk.
Performance
Peel-and-stick installation, no wiring to the trailer and no wiring to the MCU. The patent-
pending motion sensor eliminates false load transition messages when the trailer is
moving. The load status is checked every 15 minutes and any potential transition is
confirmed after 5 minutes.
17. Temperature Sensor
The Tr/IPSNET™ temperature sensor measures temperature inside a refrigerated compartment.
The self-contained wireless sensor can be placed in any location in the refrigerated
compartment and a sensor can be installed in each compartment of a multi-compartment
reefer. The sensor measures temperature in the compartment every minute, and can be
configured for your specific requirements to automatically send messages at regular intervals. In
addition, the sensor can send alert messages when the temperature varies by a configurable
amount.
• Measurement frequency: 1 minute
• Automated reporting interval: Configurable, from 15 min – 24 hours
• Temperature variance reporting: Configurable, as tight as ±5°F
• Temperature measurement range: -15°F to +160°F (-25°C to +70°C)
• Battery life: 2-5 years, depending on configuration
• Measurement accuracy: ±2°F over the operating range, typical
• Installation: Peel-and-stick or screw-mount
18. Door Sensor
The Tr/IPSNET™ door sensor uses a magnetic sensor to determine when the trailer doors are
opened or closed. With each instance, the sensor sends a wireless message to the Tr/IPS™ MCU
mounted on the trailer, which then adds the standard GPS date, time, location, and device
status, and sends the message to the CONNECT™ web application.
• Measurement frequency: Instantaneous
• Measurement distance: Make/break at < ¾"
• Operating temperature range: -15°F to +160°F (-25°C to +70°C)
• Battery life: ~3 years
• Installation: Peel-and-stick or screw-mount to trailer door and inside wall
19. Fuel Sensor
Optimized for multi-compartment mobile fuel tankers
A wireless level sensor in each compartment communicates
wirelessly with a single Tr/IPS™ solar MCU installed on the fuel
trailer
Real-time fuel level data
Information about rapid changes in fuel level relayed within
minutes, including e-mail and text alerts
Get control of your fuel trailer fleet
No other product gives you knowledge of location and fuel level
for your trailer fleet
20. TrackPoint Systems, LLC
For more information contact
Terry Lewis
Director of Sales
Office 866-469-3315 ext 5009
Cell 817-320-4254
tlewis@trackpointsystems.com
TrackPoint Systems…. Connected….. Even when you’re not!