Energy Savings for Commercial Facilities – Black Hawk Powerhouse
1.
2.
3. WHO CAN BENEFIT FROM OUR BLACK HAWK POWERHOUSE DEVICE
MANUFACTURING PLANTS
MUNICIPAL BUILDINGS
MEDICAL FACILITIES
LUXURY HOMES
OFFICE BUILDINGS
CLUB HOUSE FACILITIES
4.
5. HOW DOES IT WORK
All electrical energy coming into a facility is known as Apparent Power,
and the power we actually use is defined as Real Power. Even though
you pay for it, a portion of the power entering your electrical system
is lost to ground and never consumed. This is referred to as Reactive
Power. The ultimate goal is to bring these two factors, Apparent Power
and Real Power, closer together. The Black Hawk Powerhouse is able to
accomplish this by capturing this lost voltage, store it and feed it back
into your electrical system.
In order to accomplish this, The Powerhouse adds capacitance (stored
charge) via a series of capacitors. This enables the unit to capture the
Reactive Power, commonly lost to ground, store it, and put it back into
the system, evenly across all phases, as it is needed.
By doing this, The Powerhouse:
1. Greatly reduces low voltage issues
2. Elevates voltage of the entire system
3. Stabilizes voltage of the complete system
4. Reduces voltage drops when demand increases.
5. Reduces tripped breakers (as a result of low voltage or power spikes)
6. Lowers kilowatt hours
BLACK HAWK POWERHOUSE UNIT
6. 7 YEARS OF SCRUTINIZED TESTING
VI-JON Laboratories
The following test were conducted by General Electric (GE)
During the GE conducted study at VI-JON Laboratories, with THE POWERHOUSE Unit on for a period of 1 hour with
twelve readings taken in 5 minute increments during that period; a significant increase in Power Factor percentage
is noticed.
During the same GE
conducted study at
VI-JON Laboratories,
Reactive Energy (VARc)
reduced 57% with THE
POWERHOUSE Unit on
during a one hour period
test in twelve; 5 minute
increments.
7. With THE BLACK HAWK POWERHOUSE Unit turned on during the one hour test at Vi-Jon
laboratories, the power factor increased significantly vs. THE POWERHOUSE Unit off.
8. With THE POWERHOUSE Unit turned on for a period of one hour the Reactive Energy (VARc) decreased
significantly compared to one hour after it was turned off.
9.
10. HOW CAN I GET A BLACK HAWK POWERHOUSE INSTALLED
1. Sign Our Lease or Purchase Agreement
2. Your GES Consultant will Measure Your Facility Needs
3. A licensed Qualified Electrical Engineer Will install
Your New Custom Black Hawk Powerhouse System.
4. Your Energy Cycle Will Be About a Ninety Day Adaptation
Cycle Before Energy Savings Are Noticed In Your Billing
Statements. Enjoy Your Power Savings!
11. ARE YOU STILL SCEPTICAL - CHECK US OUT
www.greenenergyresourcesinc.com
OR
www.blackhawkenergysaver.com
After some research and due diligence you will find our
Black Hawk Powerhouse system provides a legitimate
electrical savings which will create a substantial
monetary savings for your facilities electrical usage.