To clone device settings from one DPM8000 to other DPM8000 devices, first create a backup of current settings. Then create a diagnosis file containing all settings and copy it from the source device to a computer. Rename the file to DPM4.set and copy it to the SD card of target devices. This will overwrite their existing configurations with all the settings from the source device.

1. How to clone DPM8000 device settings

2. It is recommended that you
first make a backup of your
current settings before
making any changes.

3. I describe how to clone an
extensive device configuration on
multiple devices quickly and easily,
without special software or
additional installations

4. Precondition:
DPM8000series device
Software SpeechExec Pro

5. Create Keywords for:
Authors, Work type, Comments
and Delivery

6. select
visible
information
to
display

7. Assign
Keywords
to smart buttons

8. Transfer settings
to the connected device

9. on DPM8000 go to
Menu/Device
and create
Diagnosis file

10. Connect DPM8000 and copy from
device to PC file with extension set
This file contains all the settings

11. rename the file to DPM4.set
The file can now clone all the
settings to other DPM8000
just copy to the SD card

12. now connect the target device to
PC and copy the DPM4.set to the
SD memory card.
you can check this directly, open
http://bit.ly/dpm4set download and save this file
to the DPM8000 directly.
!! Warning !! existing configuration will be
overwritten