2. SHALOM SECURITY PRODUCTS
We are glad to introduce ourselves as pioneers in
manufacturing Door interlocking system with
new micro controller based with Electro
Magnetic Locks to control cross contamination
in clean rooms and pass box.
System Description:
Interlocking system can control two or more
doors in a way that to give access to any one
door and it will never allow to open any adjacent
two doors simultaneously.
The following are the most important
characteristics of the interlocking
system:
Two Doors Closed mode: In this mode both
doors are closed and locked by means of
electro Magnetic Lock or Electric Door
Strike. Anyone who wants to get the access
can enter by passing the push button switch.
When the first door is opened second door
remain closed till the first one is closed i.e.
both doors will not open simultaneously.
There by you are preventing clean air
contamination and you are saving air
conditioning losses.
Two Door Open Mode: In this mode both
doors are normally unlocked condition. By
opening door-1, door- 2 automatically gets
locked and will not open till the first door is
closed.
Our control panels are available in 2-door, 4-
door, 8-door & 16-door control models.
DOOR INTERLOCKING SYSTEM
In case of any emergency like fire, our
system is coming with 2 relay outputs one
will open all the doors another relay close all
the doors in special protection areas.
According to your applications we will
provide customized solutions. We are
satisfying our customers in pharmacy industry
for the past 20 years by providing accurate
& adequate systems according to their
requirement with lowest possible prices
Our Systems are very much applicable in the
following areas:
1) Clean rooms
2) Pass boxes
3) Air locks
4) Pass through modules
5) Bio clean workbench
6) Air showers
7) Clean room garment locker
8) Operation theatres
9) ICU’s etc.,
Shalom Door Interlocking system
Control Panel
6. TECHNICAL SPECIFIFCATIONS FOR CONTROL PANEL
S. No Parameter Specification
1 Power supply 230V, ±10% 50 Hz single phase
2 Operating voltage 12V D.C
3 Absorbed Current 500mAmp for control panel
4 No. of manoeuvres in 24 h Continuous service
5 Environmental conditions -15° C to +60° C
6 Degree of protection IP 55
7 Control unit weight 0.4kg
8 Enclosure M.S Body powder coated
TECHNICAL SPECIFIFCATIONS FOR FEATHER TOUCH SWITCHES
Operating voltage: 2.5V D.C
Absorbed Current: 30 mAmp
TECHNICAL SPECIFIFCATIONS FOR MAGNETIC CONTACT
Operating voltage : 3.5 V D.C
Absorbed Current : 25 mAmp
Shalom Enterprises, Plot No – 412, Mallareddy Nagar, Gajularamaram, Qutubullapur
Mandal, Hyderabad – 500 055, Ph : 040 – 3100 7374 / 3100 7394, email :
info@shalomsystems.net, mktg@shalomsystems.net,
Web : www.shalomsystems.net
Mumbai Branch:
Mr. Mark Vyas
Cont: 09869083170 E mail: mark@shalomsystems.net,
Web : www.shalomsystems.net
