2. SHALOM SECURITY PRODUCTS
Hydraulic security Rising Bollards for important places
and buildings requiring higher degree of security.
Rising Bollard is widely used to control vehicular access
at high security and medium-high security sites all over
the World. It is also increasingly being used to provide
vehicle access control at sites which, whilst not “high
security” never the less have problems such as car theft,
vandalism, avoidance of parking charges and illegal
parking / access. It is also used to provide complete
protection of premises which might be otherwise
vulnerable to “Ram-Raiding”. However the most familiar
locations for the SHALOM Rising bollards are still
Military Bases, Entrances to Bank Vaults, Cash in Transit
and Security Guarding Companies, Police Stations,
Airports, Power Stations, Government Buildings and
Embassies.
The SHALOM Rising bollard is extremely durable and
reliable as it is build to very high standards with the finest
materials. Provided it is maintained in accordance with
the manufacturer’s instructions, it will give many years of
trouble free service.
Hydraulic automation consisting of a fully retractable post
made of armored steel, fitted with a security lock barrel to
provide entry protection.
APPLICATION
Air ports
Offices.
Banks.
Defense Organizations
Museums.
Embassy Offices
Retail Outlets.
Railway Terminals.
High Security zones, etc.
HYDRAULIC BOLLARDS
MODEL: SE HB-02
TECHNICAL SPECIFICATIONS
Travel time : 4 – 10 sec
Piston stroke : 740 mm
Piston diameter : 40 mm
Rising pushing power : 500 daN
Max. Pushing power : 1000 daN
Total weight : 180 Kg
Power output : 1 KW (0.75 HP)
Supply voltage : 230 V
Frequency : 50 Hz
Absorbed current : 2 A
Capacitor : 15 µF
Motor rotation speed : 1450 rev/min
3. TECHNICAL DATA SHEET
Sl. No PARAMETER SPECIFICATIONS
1 Design High security bollard in compact style with integrated
hydraulic aggregate and separate control unit for up to
five bollard units.
2 Impact Load (7.5 t @ 48 km/h)
3 Blocking Element Diameter: 275 mm +/- 5mm 16 mm wall
thickness with screwed on
4 Blocking Height 600 to 1000 mm above finished floor level (as per
requirement)
5 Emergency Operation Bollard remains in the raised position during power
failure and can be lowered manually
6 Operating Times Raising: approx. 5-6 seconds - Lowering: approx. 3-4
seconds
7 Drive 1.4 kW nominal power, 400 Volt AC, three phase, 50
Hz
8 Hydraulic Fluid Servo 68 / His pin 68 Hydro Oil
9 Control Unit PLC in control box for wall installation inside a
building, control voltage 24 V max. distance between
bollard and control unit: 50 m
10 Supply voltage 230/400 V AC, 50 Hz
11 Weight Approx. 870kg incl. Metal housing
12
Colour (Standard) Blocking element Powder coated
Bollard top plate Powder coated
Cover plate Powder coated
Metal housing Powder coated
Metal housing frame Powder coated
Installation frame Powder coated
13 Temperature Range -20°C – 65°C
Optional: Heating for up to -30°C
Shalom Enterprises, Plot No – 412, Mallareddy Nagar, Gajularamaram, Qutubullapur
Mandal, Hyderabad – 500 055, Ph : 040 – 3100 7374 / 3100 7394, email :
info@shalomsystems.net, mktg@shalomsystems.net,
Web : www.shalomsystems.net