Roku device is getting bigger with every passing day, and you can enjoy more content on Roku than ever before. But, things can change dramatically if your Roku remote stops working suddenly. This will cause a lot of inconveniences because Roku remote plays an integral part in smooth and quick functioning of the Roku device. For more information, Call (Toll-Free) 1800-322-2590

1. HOW TO FIX THE PROBLEMS OF
ROKU REMOTE? CALL 1800-322-2590
For More Information Visit
www.rokuhelp.com

2. INTRODUCTION
Roku device is getting bigger with every
passing day, and you can enjoy more
content on Roku than ever before. But,
things can change dramatically if your Roku
remote stops working suddenly. This will
cause a lot of inconveniences because Roku
remote plays an integral part in smooth and
quick functioning of the Roku device.

3. It has provided people with a lot of conveniences because
before the remote was introduced, it was very difficult for
people to operate the Roku player or stream any digital
content to the TV. There is no denial of the fact that the
Roku remote has made lives of the Roku users
comfortable because they can now easily play anything
while surfing through all the channels that are available
on Roku. But, all the comfort and convenience disappears
when Roku remote not working. Well, there is nothing
to be afraid when this happens because the problem is
temporary and can be resolved by doing a few steps.

4. REPLACE/REMOVE THE BATTERIES
• Replace the old batteries with the new ones, as the problem may
be lying in the batteries. Make sure that the batteries are branded.
• Removing and inserting the batteries is the basic step that you
need to do.
• If the batteries are working, then the problem is someplace else,
so insert the battery again and you are good to go.
• Your remote is going to indicate when it requires a set of new
batteries as it will start becoming non-responsive. Moreover, the
operating distance will also be reduced.

5. I would suggest that you
shouldn’t go for general purpose
batteries, as they are not that
great. Instead, use alkaline
batteries in order to get better
results. If you still find that the
Roku not connecting to the
Roku remote, then you have to
move to other areas.

6. CHECK THE LINE OF SIGHT FOR
ROKU’S IR SENSOR
• There is an IR sensor placed in the front end of your Roku
remote, so you need to make sure that the line of sight for
that sensor is clear. Only then, it will be able to transmit the
signal.
• The working of an IR remote is by the shining of the infrared
beam of light that goes from the remote to the actual device.
• It is impossible for humans to see this infrared wavelength,
so Roku has made arrangements in the form of a LED light so
that people can also see the light. The Roku will light up when
the signal is sent.

7. THE PAIRING BUTTON
• There is a pairing button given in the remote that can be
used to pair the remote with the Roku device. For this,
you have to make sure that all the essential Roku
update has been done.
• This pairing button is present in the battery
compartment and can be seen after removing the
batteries. For this, the Roku device will also be turned
off and in a couple of times, plus the device will also be
removed from the wall outlet.
• The importance of pairing becomes, even more, when
there are two different Roku devices present in the
room. The Roku remote will only work with the Roku
device it is paired with.

8. There is one more Roku error that is creating problems
for the people. This error is HDCP unauthorized
content disabled. This issue can stall the whole
entertainment for the Roku users. In order to resolve this
issue, it is important to take the help of Roku tech
support.
Moreover, there are some other errors that people need
to be aware of, these are Roku error code 001, 003,
011, 014. These errors also become prevalent, and Roku
technical support providers are getting regular calls
regarding the troubleshooting process for these issues.

10. SOURCES
www Roku com link
Roku com
www support Roku com