This manual includes very basic features of Remote Sensing like LAYER STACK, BASIC FUNCTION, MULTISPECTRAL BAND COMBINATION& IMAGE ENHANCEMENT, IMAGE PRE-PROCESSING, BASIC IMAGE CORRECTION, NDVI, SUPERVISED AND UNSUPERVISED CLASSIFICATION, MOSAIC, MAP PRODUCTION
2. 1 | P a g e
SUBMITTED BY SUBMITTED TO
RAFIUL ALAM RONY BASAK
REG NO:2013135006 ASSISTANT PROFESSOR
&
MD.TARIQUL ISLAM
LECTURER
DEPT. OF GEE
DATE: 18.2.2018
3. 2 | P a g e
CONTENT
SERIAL
NO
NAME OF CHAPTER
PAGE
NO
1
CHAPTER ONE (SATELLITE
IMAGE DOWNLOAD)
3-5
2
CHAPTER TWO (LAYER
STACK)
6-7
3
CHAPTER THREE (BASIC
FUNCTION)
8-10
4
CHAPTER FOUR
(MULTISPECTRAL BAND
COMBINATION& IMAGE
ENHANCEMENT)
11-12
5 CHAPTER FIVE(SUBSET) 13-18
6
CHAPTER SIX (IMAGE
PREPROCESSING)
19-24
7
CHAPTER SEVEN (IMAGE
INTERPRETATION)
25-32
8
CHAPTER EIGHT (MAP
PRODUCTION
33-40
4. 3 | P a g e
CHAPTER ONE (SATELLITE IMAGE DOWNLOAD)
For downloading satellite image go to https://earthexplorer.usgs.gov. If you don’t have an account then
sign up for opening an account with giving the actual information.
Search criteria>coordinate> Add coordinate in two format> degree/minute/second or decimal
5. 4 | P a g e
Or you can also use map by cursor,zoom in to the desire area and add place mark by clicking mouse.
After adding coordinate go to data range>>select the date range that you want.
Then select dataset>Landsat>select which Landsat image you want, check the option>result
6. 5 | P a g e
After showing result you search the date of image that you want and also see various information
about image such as footprint, raw data, band information, preview on the exact location. etc.
After that there is a download option in the tray and download the TIFF format image for getting all
band.
7. 6 | P a g e
CHAPTER TWO (LAYER STACK)
Here the TIFF format image. (LT05_L1TP_136045_20091206__01_T1.tar) means
LT05-Landsat 5
L1TP is sensor name, information
And there is a date that the image is captured and the band number also given.
Go to raster>>spectral>>layer stack,
Input the individual file one by one and locate the output file.
8. 7 | P a g e
file>>open>>raster layer>>open the destination image
Go to content>>right click the stacked image>>fit layer to window.(A)
This is the final output which is layer stacked image.(B)
(A) (B)
9. 8 | P a g e
CHAPTER THREE (BASIC FUNCTION)
Add new viewer
Home>>add views>>create new 2d views.
Link Viewers
Open new image in 2nd viewer
Home>>link viewers>>link views>>control zoom in one viewer and show the exact location in another viewer.
10. 9 | P a g e
Metadata
Home>select the image>metadata>projection>see the projection of the image
Projection is a method by which the curved surface of the earth is portrayed on a flat surface. This generally
requires a systematic mathematical transformation of the earth's graticule of lines of longitude and latitude
onto a plane.
If you need re projection , then raster>>re project >>select the categories such as WGS 84,north,UTM 46.
11. 10 | P a g e
Raster Option
Right click on mouse>>Open raster layer>>select image>>raster option>change the band combination
Add new viewer>>add raster layer>>open output file
12. 11 | P a g e
CHAPTER FOUR (MULTISPECTRAL BAND COMBINATION& IMAGE
ENHANCEMENT)
Go to multispectral and change sensor,band combination such as true color 3,2,1 and false color
4,3,2.
Manually one can change the combination or use stablished functional system.
Go to adjust radiometry and changes various stretches.
13. 12 | P a g e
Go to breakpoint and change them for better quality
Change Discrete DRA, contrast and also brightness
14. 13 | P a g e
CHAPTER FIVE(SUBSET)
Shape file method
Right click>open vector layer(a)
Select the shape file>open it(b)
(A) (B)
Select the shape file>vector dialog>re projection
Re project the shape file as same as the layer stacked image projection
15. 14 | P a g e
Open the projected shape file>select the shape file>home>copy(a)>paste(b)
(a) (b)
After it there seems a AOI file automatically add in the contents>>right click>>save layer as>>save
the AOI file
16. 15 | P a g e
Then raster>>subset and chip>>create subset image>>input the image and select output location
Select AOI file from the destination folder
Then open raster layer>>open the subset image
17. 16 | P a g e
Drawing Method
Drawing>>insert geometry>> select polygon
Draw polygon on the layer stacked image>>then automatically add a AOI file in contents>>save layer
as>>save the AOI fi
18. 17 | P a g e
Raster>>subset & chip>>create subset image>>select image>>select output location>>select AOI file
This is the subset image
19. 18 | P a g e
Subset chip method
Multispectral>>subset & chip>>place the box in exact location>>select location of the output
This is the final output
20. 19 | P a g e
CHAPTER SIX (IMAGE PREPROCESSING)
Correction:
Image processing is a process which makes an image interpretable for a specific use. There are
many methods, but only the most common will be presented here.
Radiometric Correction
Procedures that correct or calibrate aberrations in data values due to specific distortions from such things
as noise reduction or instrumentation errors (such as striping) in remotely sensed data.
Noise reduction
Applies an edge-preserving smoothing techniques.
Raster>>Radiometric>>noise reduction>>input file>>select the output location
correction
radiometric
Atmospheric
Geometric
21. 20 | P a g e
Open raster layer>>open corrected image>>compare
Brightness Inversion
This dialog allows both linear and non linear of the image intensity range.Dark details become light and
light details become dark.
Raster>>radiometric>>brightness inversion>>input and output file in selected location
22. 21 | P a g e
Open raster layer>>corrected photo
Histogram Equalization
Apply a nonlinear contrast stretch that redistributes pixel values so that there are approximately the same
number of pixels with each value within a range.
Raster>>radiometric >>histogram equalization>>input and output file and location.
Open raster layer>>open corrected image>> go to metadata>>histogram
Go to metadata of previous layer- stacked image>>histogram
Then compare the two images
23. 22 | P a g e
(B)
Here the corrected image histogram show the largely distributed pixel value
.
Atmospheric Correction
Haze reduction
Atmospheric effects can cause imagery to have a limited dynamic range, appearing as haziness or
reduced contrast. Use this dialog to sharpen an image using Tasseled Cap or Point Spread Convolution.
For multispectral images, this method is based on the Tasseled Cap transformation that yields a
component that correlates with haze. This component is removed and the image is transformed back
into RGB space. For panchromatic images, an inverse point spread convolution is used.
Radiometric>>haze reduction>>input and output the file >>open new raster layer(a)
open corrected file(b)
(A)
24. 23 | P a g e
(a) (b)
Compare and see the changes
Geometric Correction
Mosaic
Use MosaicPro workstation to join georeferenced images and form a larger image or a set of images (these
mosaicked project files are named with an .mop file extension). The input images must all contain map and
projection information and have the same number of layers. They do not need to be in the same projection or
have the same pixel cell sizes. Calibrated input images are also supported.
Go to raster>>Mosaic pro>>display add images dialog>>add images
Then again add image through same process
25. 24 | P a g e
Click process in the bar and run mosaic>>select output folder
Open raster layer>>add mosaic image
In EarthExplorer maximum satellite images are geometrically corrected.So it is not need to do
geometric correction in details.
26. 25 | P a g e
CHAPTER SEVEN (IMAGE INTERPRETATION)
Inquire Tools
Home>>select>>inquire tools>>open image>>select feature in map
Then evaluate the pixel value with band combination.
In Landsat 5 ,false color composition 4,3,2 is a popular combination where red indicate
vegetation ,blue indicates water.so in the cursor is in waterbody the pixel value of blue is larger.
27. 26 | P a g e
Measurement
Click to measure position, length, direction, area, and so forth, and optionally save the measurements to
an annotation layer.Measurements can be based on a Cartesian system or on the ellipsoid.
Home>>measure>>select parameter such as sq. Kilometer, meter etc.(a)
select point>>polyline>>Set the line on a feature or objectives and measure(b)
(a)
(b)
28. 27 | P a g e
Select point>>polygon>>draw a polygon of a feature and then measure.The measurement dialog
show it.
NDVI
This is done in order to suppress, or normalize, varying effects such as viewing angles, sun shading,
atmospheric effects, soil difference, and so on. It is also applied to maximize sensitivity to the feature of
interest, such as the relative health of vegetation. To achieve this most Indices go beyond simple band
division to include differencing, weighting, and the introduction of other variables
Go to raster>>unsupervised>>NDVI
29. 28 | P a g e
Select the sensor such as Landsat Tm and make sure that NIR and RED bands are selected
Select input and output file
Home>>inquire tools>>placed on this on ndvi image.
It measure the file pixel and the range is +1>0>-1 .
Less than zero means there is no vegetation
30. 29 | P a g e
Profile Tools
Spectral Profile
Use the Spectral Profile dialog to visualize the reflectance spectrum of a single pixel through many bands.
This technique is particularly useful for hyperspectral data that can have hundreds of layers. This technique
allows estimates of the chemical composition of the material in the pixel. You can compare the profiles that
you generate to those from laboratory (or field) spectrophotometers.
Go to multispectral>>spectral profile
Select the inquire tools and plot the features.It shows the pixel value for different layer.
31. 30 | P a g e
Surface Profile
Use the Surface Profile Viewer to visualize the reflectance spectrum of a rectangular area of data file
values in a single band of data. You can overlay the wireframe surface with a grayscale, thematic, or true
color image.
Go to multispectral>>spectral>>surface profile
Select feature and plot different layers.It shows 3d model of pixel values of different features.
32. 31 | P a g e
Spatial Profile
Use the Spatial Profile Viewer to visualize the reflectance spectrum of a polyline of data file values in a
single band of data (one-dimensional mode) or in many bands (perspective three-dimensional mode).
The most common example of single band data profile is that of a Digital Elevation Model (DEM) being
used to create a height cross-section profile along a route. This helps in interpreting changes in elevation
along a planned route and in identifying sections of the route which are particularly steep or flat.
Go to multispectral>>surface profile>>spatial profile
It shows pixel values with distance that you draw, in a plotted layer.
33. 32 | P a g e
Unsupervised Classification
ERDAS IMAGINE uses the ISODATA algorithm to perform an unsupervised classification. ISODATA
stands for Iterative Self-Organizing Data Analysis Technique. It is iterative in that it repeatedly performs
an entire classification (outputting a thematic raster layer) and recalculates statistics. Self-Organizing refers
to the way in which it locates the clusters that are inherent in the data.
Go to raster>>unsupervised>>unsupervised classification>>input and output files
destination>>define classes in isodata>>define iteration, means scanning the main image
Open raster layer and open that unsupervised image.
Go to>>table>>show attribute>>edit class name,color (click on the icon) and also opacity by clicking
on it
34. 33 | P a g e
CHAPTER EIGHT (MAP PRODUCTION)
Supervised Classification
Supervised Classification provides tools for categorizing pixels using interactive supervised techniques.
You provide examples of what particular classes look like, which are then used by the software algorithms
to derive rules for mapping all other pixels into the class values.It is done by manually.
Go to raster>>supervised>>signature editor>>
Home>>drawing tools>>create polygon and add them as a class in signature features by clicking create
new signature as AOI>>again do it of same feature but in another location.
When many classes of one feature added, merge them(a)
make another one class automatically ,delete the previous selection.(b)
(A)
35. 34 | P a g e
(b)
Again create polygon of another feature by drawing tools and add them in signature tools as class like
previous method.
doing it one by one and add classes in signature tools.
Edit the class name and color also by click it such as water-blue color
After completing manually drawing method, save signature file as .sig.
Then go to supervised classification>>locate input,output and .sig files.(a)
After doing that open raster layer>>open the supervised image.(b)
Go to home>>table>>open attribute table
36. 35 | P a g e
(a)
(b)
It is done by manually when one can go to the location and analyses the features and observe them.Finally
show the analyzed features on map by different classes but in unsupervised classification software done it
automatically by stablished algorithm.
37. 36 | P a g e
Unsupervised Classification
See details in page no-32
There is a unsupervised classification with 5 classes such as water,bare
land,vegetation,crop,settlement. Identify them with different colors in map
.
Add views>>reate new map view
There add a viewer,click on map view,go to layout >>map frame
Select map template and edit the map tile also
38. 37 | P a g e
Double click on map viewer,after adding map frame,make sure that there is another viewer where
unsupervised image is opened.Placed the unsupervised image on the box and click ok of the map
frame tools.
The unsupervised map is open on the map viewer
39. 38 | P a g e
Layout>>map grid>>map grid
Change margin>>length outside as your wish
40. 39 | P a g e
Add the scale bar properties and select parameter such as meter.
Select Legend option and identify the classes.
Modify yourself
41. 40 | P a g e
Add the north line
Add locational map also
Final map is ready
File>>print
THE END