5. Accuracy
of this little gem is on par with
more expensive units. At 22 yards this
760-PCP is shooting just under dime sized
groups…
6.
7. Thisgun is a PCP conversion shooting at
respectable velocities in all spring tension
configurations, using a 1700psi fill. The gun
is dressed in original 760 wood, with an
extended tube. The valve is pinned with
three 8-32 screws. The tube extension is
pinned in a clever fashion that joins the new
extension to the existing tube; each end using
three 8-32 screws. Discovery barrel and
sights. Filled via fill probe located on the
muzzle end.
10. Check out his photbucket site provided in
this link where all the details can be seen!
Link:
http://s667.photobucket.com/albums/vv36/
seanjspictures/CR760%202011%20Build%
20Off/
11.
12.
13. Can shoot decent groups too! The dime
displays the tight grouping in which his
little 760 can puff down range equipped
with a BSA 4x32 AO scope.
14. Stuffed piston
Shimmed pump cup
Power Master 66 pump tube (longer pump
stroke)
Power Master barrel assembly
Painted wood furniture
Trigger work to shorten the travel in the
parts array, polished contact areas
Brass valve assembly