s

2. Front Panel

3. Rear Panel

4. Remote Control

5. Installation
Connections

6. Connecting Display device
This unit can be output simultaneously from the HDMI and VGA
jack. The video signal connects between the system and the
monitor.
VGA Monitor connection
Connect the VGA jacks on the rear of the unit to the
corresponding input jacks on the TV or monitor using the VGA
cable. VGA Monitor connection

7. Connecting Audio device
Connect the AUDIO OUT jacks on the unit to
the mono audio in jacks on your audio device.
Microphone and Speaker connection
Microphone and Speaker connection

8. HDMI Monitor connection
Connect the unit to the HDMI monitor using a
HDMI cable (Type A, High Speed HDMITM
Cable).
HDMI Monitor connection

9. Connecting USB device
USB device connection

10. Connecting E-SATA device
E-SATA device connection

11. Connecting Network
Network connection

12. Connecting LKD1000
Controller
LKD1000 controller connection

13. Connecting Alarm Input
and Alarm Output
Alarm Input
You can connect up to
16 alarm sensors. Each
alarm sensor should be
connected with G
(GND). The signal state
is adjustable to N/O
(Normal Open) or N/C
(Normal Close)
through the setup
menu.
Sensor input connection

14. Alarm Output
Connect the alarm device to the alarm output. Alarm
signal outputs when an event occur.
Alarm output connection

15. General Explanation of the
LiveScreen on the Main Monitor

16. Selecting the Split mode

17. Grouping channel

18. Export the recorded data

19. Viewing the System Log List

20. Viewing System Information

21. Camera Information

22. Configuration menu

23. System settings
Properties

24. TCP/IP v4

25. Network

26. Network Streaming

27. Date/Time

28. NTP

29. Controller

30. Update

31. Backup

32. Device settings

33. Storage

34. Display settings

35. Sequence

36. Record settings

37. Select a day of the week.

38. Select a recording
mode.

39. To Set a Recording Schedule for
a Special Day (Special Schedule)

40. Sensor

41. Motion

42. Event settings

43. Notification

44. Mail

45. Emergency

46. SNMP

47. Output

48. Buzzer

49. User settings
Group Authority

50. User

51. Setup Wizard settings

52. Step 1

53. Step 2

54. Step 3

55. Step 4

56. Operation
Instant Recording

57. Date and Time Search

58. Event Search

59. Bookmark/Protect Search

60. Export Search

61. Using the playback control menu