1. Paul C. Vincent IV
Location: Houston, TX
vincent_p@att.net
832-2453850
Summary:
Experienced Technician with active TWIC card valid until May 2020.
Education:
Texas City High School Graduate, Texas City, TX
High School Diploma 1988
Attended Universal Technical Institute
Certifications:
TWIC Card valid until May 2020
Active Passport
NDT Certificate Level 1
OSCA 19 Basic Plus
United State Coast Guard Approved
HUET Helicopter Underwater Egress Training, Personnel Transfer Basket and Swing Rope Safety
North Sea Training
STCW-95 Basic Safety Training
STCW Medic First Aid/CPR
STCW Basic Fire Fighting
STCW Personal Survival Techniques (HOUSTM-363)
STCW Personal Safety and Social Responsibility
PPE (Personal Protective Equipment) as Per OSHA 1910.12 & 134
Hydrogen Sulphide Training as per ANSI Z-390 API 49,54,55
Respirator Fit Test as per OSHA 1910.134 & CFR 30-250
Rig Pass Orientation Provider R750
IADCA 1063264
Characteristics:
Dependable
Hard Worker
Self Starter
Motivated
Strong People Skills
Excellent Communication Skills
Co-operative and Interested in Learning New Skills
Work Experience:
FLUOR U.S. Gulf Coast Training Center / Pasadena, TX July 2016-Sept.2016
Brand Scaffold Services, INC., Long Beach, CA Sept. 2015 – March 2016
Scaffold Technician - Exxon Torrance Refinery ESP Project
Moving and Maintaining Scaffolding
Report about activities regarding changes and modifications in scaffolding
Accountable for Scaffolding
Integrated Equipment, Houston, TX June 2015 – Sept. 2015
Field Service Technician
Assemble and test pressure for Valves
Maintaining test equipments
Pressure test and coordinate test procedures
Cage Water Technologies, South Texas Dec. 2014 – March 2015
Water Treatment Technician (On Rig)
Go out to test sites and maintain test equipment and test water which was used for treating purposes
Clean water as per standard procedures
Take samples at every stage to make sure the water is not polluted
Use chemicals in laboratory to treat water with chlorine dioxide
2. National Oilwell Varco, Houston, TX June 2013 – Dec. 2014
Assembly/Test Technician
Assemble and test oil field equipments like valves, blow out preventers, running tools and hydraulic pressure
control diverters
Integrated Equipment / Houston, TX March 2011 – June 2013
Field Service Technician
As a field service technician would assemble and repair oil field equipment in field and shop
Maintaining and service tools and equipment
T3 Energy Service, Houston, TX 2010 – 2011
Field Service Technician
Repair of Blow out Preventers and valves in the field and shop for customers
National Oilwell Varco, Houston, TX 2007 – 2010
Field Service Technician / Certified in ST-80, IR-3080
Repair Top Drives, BOP’s and SBOP’s and pressure test at West Little York location
Allied Power Group, Houston, TX 2006 – 2007
Evening Shift Supervisor / Parts Inspector
Responsible to inspect turbine parts that are weld repaired and manage evening crew
Tranter PHE, Houston, TX 2005 – 2006
Service Technician
Repair and install heat exchangers
Leading Edge Turbine Technologies, Inc., Houston, TX 2001 – 2005
Shop Mechanic
Turbine maintenance, repair, rebuild, dye penetrate, weld repair, compressor repair, forklift repair, rotor technician,
blade removal
Noble Logistics Services, Inc., Grand Prairie, TX 1999 – 2001
Head Service Clerk
Parts Distributor, Inventory Control, Handle Customer relations
Implemented Training course for new recruits-speeding profitability
Distribution Dynamics, Inc., 1997 – 1999
Warehouse Manager
Manage 11 employees in operations, implemented training course for new recruits, expanded sales to include
mass markets accounts