1. High Performance Container PE FILM Bulk Liners
• HIGHER THICKNESS: BULK-FLOW standard Film thicknessis 140
microns.Due to the high tolerancesin films, 120 microns PE films pose
the risk of weak spots beyond acceptablefilm strength tolerances.
• NO EXTERNAL WELDED SEAMS: BULK-FLOW PE film Body Liner tube is
made longer so it can be folded at the end and avoid any type of long
external welded seams that are the weak point of the Liner. The only
welded seam is a single point where all the folded tabs meet and it is
inside of the Liner.
• OPTION TO USE 4 OR 5 STEEL BARS: Due to the strength of
proprietary clips attached to the liner’s floor end, each liner comes with
the possibility of using a rope or a steel bar on the front floor end.
Potential saving of 1 steel bar.
• HEAVY DUTY BULKHEAD: Unique design that uses a longer tube to be
folded on the ends and avoid long welded seams. The outer Woven
Bulkhead is also made of folded Woven HDPE with a total thickness of
280 gsm (9oz/yd2)Fast installation with elastic cords and metal
carabinehooks.
• PROPRIETARY FULL FLOOR FLUIDIZING SYSTEM (OPTIONAL): Built-in
fluidizing system for hard-to-flowproducts
• GUARANTEED FULL ACCESS TO DISCHARGE PORTS:
• Pull-up top steel bar in the bulkhead guarantees discharge
ports fully accessible at all times.
• High quality non-stretchable belts ensures bulkhead and
steel bars position at all times.
• HIGH QUALITY MATERIALS: Made of virgin HDPE resin with
extraordinaryelasticity and FDA compliant.
www.bulk-flow.com
www.bulk-flow.com

2. High Performance PE FILM Bulk Container Liners
www.bulk-flow.com
www.bulk-flow.com
Fig.1: Bulk Liner installed ready to be loaded

3. High Performance PE FILM Bulk Container Liners
www.bulk-flow.com
www.bulk-flow.com
Fig.2: Top Pull up Steel Bar ensures full access to discharge ports at destination

4. High Performance PE FILM Bulk Container Liners
www.bulk-flow.com
www.bulk-flow.com
Fig.4: Fast installation with metal carabine hooks