Panam pan asian restaurant interior design case study
1. •Architects: architecture bureau MODGI Group
•Area:432 m²
The main idea of the restaurant interior concept is to make an
Asian restaurant without direct reference to Asian motives.
PANAM Pan Asian Restaurant
2. Zoning of the restaurant supports the idea of openness and simplicity: space is
divided into several zones for different tasks. There is a large variety of standard
seats, as well as a VIP room and a children's room. A large part of the area is
occupied by an open kitchen.
3. The main method of zoning is partitions
made of a metal frame with inserts of
translucent relief glass.
This spectacular and graphic technique is softened by flowing
curtains made of light milk cotton.
4. The zoning is shown through the colors
The light and vibrant colors are used for
common area
And the dark color is used to define the VIP
dinning area
And based on flooring the VIP area are left
with unplaster concrete to give gray color for
the composition.
Space Element
Floor Engineering
board
Wall plywood
color Green , peach
fixture Hanging
lights
5. Entrance lobby
Wall- Plywood partition with
Glass and tiles
Floor- Engineering board
bright peach and orange shades with gray
and pale green
ENTRANCE LOBBY
9. ELEMENTS
Vertical lines can make rooms seem more
spacious than they actually are and ceilings
appear higher.
The sense of verticality is given by the plywood
and metal partition wall and pattern of tiles
where verticality is preferred over horizontality,
because of the function of the space.
Line
Space
When space changes gradually, it is more
pleasing than when it changes abruptly
Objects grouped into large units will create a
more ordered space.
The spaces through out the area
follows same pattern with respect
to color material furniture lights
etc.
And some variations are done
with furniture.
10. Color
The combination of bright peach and orange
shades with gray and pale green. This
combination unites the entire composition.
Furniture are set up in such a way, that in
the color combination of space. If any color
is missing out in the particular space. Those
colors were completed in furniture.
Where each space look complete
PEACH
GRAY
PEACH
Color is the key element of interior
design. It is used to create aesthetically
pleasing combinations and also works
on a psychological level
Color schemes look best when one color
dominates. Dominate color should
cover about two-thirds of the room
area. Here peach is the dominating
color. Used for ceiling
This color combination gives the warm,
relax and soothing feeling
ORANGE
ARTIFICIAL
COLOURS
11. Form
Rectangular Geometric form.
A room is more pleasing if the form of the
dominate piece is repeated in minor pieces
and accessories in a room.
Here the tiles are repeated. In a uniform
pattern on the walls.
13. MATERIAL PALLET
The main method
of zoning is
partitions made of
a metal frame with
inserts of
translucent relief
glass.
This spectacular
and graphic
technique is
softened by
flowing curtains
made of light milk
cotton.
The plywood in
countertops
Engineering board
for flooring
Tiles