My Generator is the largest pure play online retailer for Generators, fridges and more in Australia. They deal in high quality generators, pressure washers and pumps, outdoor power equipment and other caravan products online in Australia.
Understand the basic functionality of pressure washers
1. UNDERSTAND THE BASIC FUNCTIONALITY OF PRESSURE WASHERS
Pressure washers are handy for the toughest cleaning jobs where just water and soap are not enough.
They can remove dirt, grime, mould, and other elements that may have built up over time on surfaces,
making them convenient for blasting certain areas clean, like barbecue grills, patios, driveways, and
lawn furniture. Because of how they work, they spare you from tiresome and time-consuming
scouring and scrubbing, and they eliminate the need to buy specially formulated cleaners and cleaners
that may not be good enough for the toughest dirt. Here is a more detailed look at how pressure
washers work:
• The basic functionality of the pressure washer – Water from pressure washers come with a
slight electrical polarity, which means that an end is positively charged, and the other has a
negative charge. So, they stick to surfaces by themselves. Pressure washers may be
sophisticated, but their build is quite simple: a water pump with an electric motor to power it.
You can use tap water, too.
• How they clean - Soap chemicals found in detergents only work to break down grease and
gunk to allow water to flush them off easily. However, certain types of dirt will not budge, and
this is when you will need a pressure washer that uses a high-pressure, narrow jet of cold or
hot water to blast the dirt off. As water travels fast, it hits the filthy surface with a high kinetic
energy to push the dirt away.
• No soap needed – Pressure washers use only water to remove dirt and grime. They do not
need any specially formulated soaps or cleansers, so you do not have to worry about causing
any damage to certain types of surfaces.
• Be careful how you use them – Pressure washers spray a high-pressure jet of water to surfaces,
so they could potentially damage certain kinds of surfaces. So, before you start cleaning, test
the pressure and the water on an area that is not likely to be seen to see how it affects it.