2. Setting up the IP-address of the V730:
Press: on the Touch Screen
Press:
3. Select the folder: DICOM
Note: To move the cursor use the track ball
Left mouse button
Right mouse button
4. Press:
A Password dialog appears.
Type in Password: v730 and press
The following dialog appears
Type in: IP-address
Subnet Mask
Default Gateway
Ask the network administrator for these values!
5. After entering all these values press the button
Than close the network and dialup connection dialog.
Setting up the destination:
Where the images should be sent e.g. DICOM server, DICOM Printer.
Select the DICOM setup dialog (if it is not already open) by pressing
Utilities – System Setup - DICOM
To add a device
Press the button
The DICOM Device Setup dialog is displayed
6. Select the correct service (Store, Print, Report or Worklist)
Enter the AE Title, Alias, IP address and port number of the destination
Then press the button.
Sending images to the defined destination:
Open Sonoview - open exams list - select a file.
7. Press the Send or Print button. The following dialog is displayed.
Select the target and press: