1. A WORK SAMPLE
of
Mohammed S. Gouda
Structural Engineer, M.Sc.

2. CRYSTAL PLAZA Project - BLD ( J )

3. Client:
Location: Egypt
Area: 3700 m2
Use: Mixed use
Number of Floors: 14 floors and mezzanine
Scope: Design review of all structural elements under static and seismic
conditions, preparing the new drawings, and calculation sheet
Main Challenges: Weak soil bearing capacity, numerical modeling, and
seismic analysis of the structure with the presence of two suspended
buildings on its sides
More information:
Part ( J )

4. Three dimensional numerical model including soil and support
flexibility using SAP 2000

5. 2D Numerical model for raft using SAFE

6. New RFT of raft with rehabilitation proposal for unsafe molded parts

7. New RFT of ground slab and new details of
vertical elements

8. DMG Office Building

9. Client :
Location: Egypt
Area: 2300 m2
Use: Administrative
Number of Floors: 9 floors and roof
Scope: Check the structural safety under static and seismic conditions,
preparing assessment report, and providing proposals for inadequate
elements
Main Challenges: Investigating the ability of structural steel supports of
pedestrian bridge to accommodate sway of two parts of building
More information:
DMG Office Building

10. Three dimensional numerical model including soil and support
flexibility using SAP 2000

11. Modeling of foundations in the 3D Numerical Model

12. Stresses distribution on soil using SAFE

14. SAKAN MALL

15. Client :
Location: Egypt
Area: 3000 m2
Use: Commercial
Number of Floors: 5 floors and roof
Scope: Structural Design
Main Challenges: Design of Retaining wall under variable supporting
conditions, Design of foundations and differential settlement due to
non-uniformity of structure configuration, and first time to lead a group
of work (2 colleagues)
More information:
SAKAN MALL

16. Three dimensional numerical model including soil and support
flexibility using SAP 2000

17. Modeling of foundations in the 3D Numerical Model

18. Concrete dimensions and RFT of foundation system

19. Details of Columns and Retaining wall

20. RFT of First Basement

21. El – Badr Plaza Mall

22. Client :
Location: Egypt
Area: 4000 m2
Use: Commercial
Number of Floors: 4 underground floors and 3 typical floors
Scope: Structural Design
Main Challenges: Design of Retaining wall, Punching of slabs at Atrium
Zone, Deflection, and design of Columns
More information:
El – Badr Plaza

23. Three dimensional numerical model using SAP 2000

24. Concrete dim. and RFT of columns, cores, and walls

25. Concrete dim. and RFT of Retaining wall

26. Meriland School

27. Client :
Location: Egypt
Area: 18,000 m2
Use: Educational
Number of Floors: Basement + Ground + 2 untypical floors
Scope: Structural Design
Main Challenges: Proposing the structural system, Numerical modeling
of main building (Parking area, Swimming pool, Gym, Theater, Office
area), Design of foundations, and concentration of main building loads
at the frames supports
More information:
Meriland School

28. Three dimensional numerical model of main building using SAP 2000

29. Framing planes of basement and ground floors

30. Framing plane of foundations

31. Client :
Location: KSA
Capacity: 400 m3
Use: Potable and fire water system
Total Height: 60 m
Scope: Seismic analysis and design
Hail University tank

32. 3D numerical model and mode shapes

33. Preparing the structural drawings and details of WADI BRIDGE at
TABUK ROAD, PHASE 1, KSA

36. Preparing the structural drawings and details of Cairo-Cairo
Bridge (1) at Suez-Cairo Road, Egypt