1. 1
Mohamed Sayed Sayed El-Gamal
136 El Gomohoria St
El Khanka City
Cairo- Egypt
Tel. (202) 4674080 /4696755
Mobile : 01222480082- 01005325825
An ambitious Electrical Engineer with 15 years of wide range experience in construction and industrial fields
and automatic control systems. Career has been steady, versatile and willing to work worldwide.
EDUCATION
Graduation B.Sc. Of Electrical Power & Machines Department.
Faculty of Engineering – Ain Shams University.
Graduation date June 1998
- Grade ” Good”
- Project ” power factor improvement”.
- Projectgrade “Excellent”.
EXPERIENCE
CAREER HISTORY
July 2000 - Present Arab Swiss Engineering Company for Automation (Asec Automation -ASA), Cairo, Egypt.
ASA is an Egyptian – French joint venture branch from ASEC, French Management.
Title:
1-Manager for workshop.
2- Designer & Commissioning Eng.
JOB ACTIVITIES:
1- Manager for Asec work shop (Tabben and free zone workshop):
Follow all the projects in the design office, follow the materials which must be delivered, prepare the man power who will
work in each project , prepare the mechanical scope of the project and then start the electrical scope, make
Commissioning and start up for each panel and becoming ready sending to the customer.
The projects, which had done in this period:
1. General Petroleum Company.
2. Helawn Cement Co.
3. Cemex Cement Co.
4. Egyptian Telecom.
5. Amehria Cement Co.
6. Tunnis Cement Co.
7. Jordan Cement Co.
8. Vatech Co.
9. National Cement Co.
10. Arsco Co.
11. Ameryiah Cement Co.
12. Pico Co.
13. Tourah cement Co.
14. Sinai Gray cements line2 (under work now)
15. Sinai white cement line2 (under work now)
16. Sudden project (El Takamol and Mass Global projects)
2-Commissioning and design site engineer :
Commission in the following projects.

2. 2
1-Sinai cements factories.
A-Sinai Gray cements line1.
B-Sinai white cement line1.
Commissioning Eng. Responsible for
 Do precommissioning for the entire device (Test all devices connect to MCC panels, Acc panels, PLC
panels,). In Crush, Raw mill feed, Raw mill, Kiln, Cooler, Cement mill, packing stations.
 Following up erection of the system at the site.
 Commissioning and start up of the system.
 Preparation ofthe documents (AS Built drawings- Technical Specifications- Operating principles… etc).
2-Egypt Cement Company. (Quana).
Responsible staff Commissioning Eng. Responsible for
 Do precommissioning for the entire device. Test all devices connect to Mcc panels, Acc panels, PLC
panels,). In Crush, Raw mill feed, Raw mill, Kiln, Cooler, Cement mill, Packing stations.
 Commissioning and start up of the system.
3- Assuit Cement Company. (Up grading line1, 2& 3)
 Do erection, commissioning & start up for 2-stations.
1. Reclaimar station.
2. Medium volt station.
4-Alexandria Cement Company.
Do precommissioning for the entire device. Test all devices, startup for all the system.
5- Assuit Cement Company. (Up grading line 1)
 Responsible for the drawing &do erection, commissioning & start up for 3-stations.
1. Crusher station.
2. Medium volt station.
3. Clinker transport station.
6- Assuit Cement Company. (Up grading line 2).
 Responsible for the drawing &do erection, commissioning & start up for 2-stations.
1. Crusher Station.
2. Stacker Station.
7-Asec Helwan Cement Co. (up grading line1).
 Responsible for the drawing & erection, commissioning & startup for all the line.
8-Amerayh Cement Co. (maintenance lines 1, 2 & 3).
 Achieve the annual maintenance for all the line and solve all the trouble shootwhich happened
9- Tourah Cement Co.
 Upgrade for line 9
Design the following in office:
Design the following:
 Prepare PLC panels & LIGHTING panels in workshop as Manufacture for Sinai White
Cement.
 Design MCC panels for (o & k) Crusher in Assuit line 2
 Design PLC panels & CCF panels in Helwan line 2.
 Prepare cables list and signal list for Jordan Cement Co.
 Design MCC for Jordan Cement Co.
 Design & prepare the following for Assuit line 2.
1. Design MCC for these stations (Crusher, Kiln, Cooler)
2. Prepare cables list for these stations.
3. Signal list.
4. Design unit diagrams for all these stations.
 Project Engineer for Helwan cement co. line 1
 Design & prepare the following.
1. Design MCC for all the line station.

3. 3
2. Prepare cables list signal list for these stations.
3 Design all aux panels like PLC, ACC, MP.
4. Design unit diagrams for all these station
 Prepare the panels in workshop & do commissioning and as manufacture drawing for the following.
1. Main Distribution Board up to 4000 Amp.
2. Motor Control Centers MCCs with interface to PLC.
3. Frequency converter panels (ANSALDO, ABB, Telemecanique)
4. Soft starter panels (General Electric, Telemecanique)
5. Lighting Panels, Fire Alarm System, Earthing System and Telephone System.
6. Auxiliary Control Center Panels.
7. PLC Marshalling Panels digital & analog.
8. Junction boxes for instrumentation interface.
9. Project responsible for the drawings & documents of Helwan line 1, (Asec Helwan Cement
Company).
So as summery Supervise, Participate in engineering studies, Commissioning and startup for 9 existing cement lines
(upgrading) and 3 new cement factories as turn key electrical contractor with international companies F.L. Smidth
Denmark, Lafarge France and Cemex Mexico.
 FLS………. Sinai grey and Sinai white. ........... (New Lines Sinai Cement Company SCC).
 FLS………. Qena line 1…………...(New Line Misr Cement Company MCC).
 LAFARGE. Rashadiya line A & B upgrading…….............. (Jordan Cement Factory JCF).
 LAFARGE. Fuhaise line 5 & 6 upgrading……..….............. (Jordan Cement Factory JCF).
 CEMEX…. Line 3&1upgrading ………….. (Assuit Cement Company ACC).
 FLS……… Line 2 upgrading …………… (Helwan Cement Company HCC).
 LAFARGE. Honduras line 1 upgrading…. (Honduras Cement Factory HCF).
 CEMEX…. Line 2 upgrading ….…..…….…. (Assuit Cement Company ACC).
 BLUE CIRCLE. Alexandria line 1(New Line, ALEXNDERIA BORTALAND CEMENT).
July 1999 to July 2000: PEPPERL&Fuchs EgyptCo. Naser City, Cairo.
Title: Technical Support Eng.
JOB ACTIVITIES:
Pepperl & Fuchs Egypt that work in field of Factory & Process Automation.
1. Level Control. (Limit &continuous control).
2. Proximity switches (All type of sensor).
3. Barrier.
4. Encoders. (Absolute &incremental).
5. Counters & tachometers.
Others applications Valves, Manometers, Measurement equipment…etc.
The main activity is giving the solution for any problem in automation process-
Aug. 1998 – JLUY 1999: Abu Zaable for Specialty Chemicals Co
Title: Maintenance Engineer
JOB ACTIVITIES:
In sub-station in Abu Zaable for specialty chemicals Co.
Maintenance Engineer (9 Substations) for:
Control panel:
1. High voltage C.B.
2. Measurement unit.
3. Connection unit.
4. Low voltage C.B.
5. Power transformer & cables.
6. Maintenance of Electrical Trucks.
CAPABILITIES
 Familiar with multinational working environments and coordination as (design office, main contractor, sub-
contractors).
 Team player and ready to accept responsibility.
 Very good oral and written communication skills.
 Self-motivated, self-training, cooperative, thinking through logical procedures.
INTERESTS & ACTIVITIES

4. 4
Hobbies : Football & reading.
COMPUTER SKILLS
 Windows 95/ 98 / 2000 / NT & applications ( MS Office 2000, Word, Excel, Access, … ).
 Auto CAD.
 S A P.
LANGUAGE SKILLS
English: Very good. Arabic: Mother tongue..
PERSONAL DATA
Date of Birth : 19-4-1974
E-Mail Address : mohamedelgamal74@hotmail.com
Marital Status : Married
Military Service : Finally Exempted
Tel :
:
002-02-44674080 / 44696755 (home)
002-012-22480082 (Mobile)
002-010- 05325825 (Mobile)