Frequency and Pulse output is operated through the same terminal POUT (P+) & PCOM (P-). Customers can select one of them by the parameter setting menu. Frequency/Pulse output support three models as below;

1. Electromagnetic Flow Meter Wiring For
Output
Pulse (Frequency) Output Wiring
Frequency and Pulse output is operated through the same terminal POUT
(P+) & PCOM
(P-). Customers can select one of them by the parameter setting menu.
Frequency/Pulse
output support three models as below;
Output Model 1: OC gate is passive output, user need to connect a pull-up
resistor
The ON/OFF switch of the remote transmitter (red switch in wiring
cavity) needs to dial inward(off position).
The ON/OFF switch of the compact transmitter needs to dial down or left
(off
position).
POUT (P+) Output frequency/pulse signal
External power V+ can support 5V/12V/24V, resistance range of pull-up
resistor is 2k-10k

2. Output Model 2: OC gate is passive output, user need to connect the
pull-down resistor.
The ON/OFF switch of the remote transmitter (red switch in wiring
cavity) need to dial inward (off position).
The ON/OFF switch of the compact transmitter needs to dial down or left
(off position).
POUT (P-) Output frequency/pulse signal.
POUT (P+) Connect external power V+
This model is widely used in an integrated system between flow meter
and PLC.

3. Output Model 3: Level mode active output that directly drives the load.
The two-way dial switch (red dial switch in the wiring cavity) of the split
converter
is turned outward (ON position), and the two-position dial switch of the
integrated
a terminal board is dialed or turned to the right ( ON position)
2. Current output wiring

4. The current output is designed with a high-precision large-scale
integrated circuit
chip.
It does not need zero and full-scale calibration.
The output is stable and reliable,
with good interoperability and temperature stability.
The current output has three terminals IOUT(I+), ICOM(|-), and Ivee,
which
support two current output modes, two-wire power supply, and no power
supply
current output.
Output Model 1: Two-wire current output
Terminals are IOUT(+) and ICOM(1-).

5. Output Model 2: Two-wire passive current output
Terminals are IOUT(I+) and ICOM(1-).
Mr. Michael Sun
Sales Manager
Dalian Zero Instrument Technology Co., Ltd China
p: +86-411-88586750 m: +86 17640305359
f: +86-411-88586751
a: Room 4605 No.9-1 Haifu Road Dalian Bonded Area Pilot
Free Trade Zone Liaoning China 116001
w:www.zeroinstrument.com e: info@zeroinstrument.com