We take great pleasure in introducing our company to your esteemed organization. Venus Technology is a service provider company, which is established in the beginning of 2001, which provides solution in Design, Developments & Manufacturing of sheet metal dies, BIW Fixture, Gauges & Checking Fixture, Plastic Mouldings Dies, Casting Design & CAD / CAM / CAE services with consistent quality, which enables us as best in service to our most valuable customers like TATA Motors, TATA Automotive Ltd. (TAL), Bajaj Auto Ltd., Precision Automation & Robotics India Ltd.(PARI), Gange Pressings Pvt. Ltd., International Auto Ltd., Onkar Dies Pvt. Ltd., Comau (I) Pvt. Ltd., Conex Avio Auto (I) Pvt. Ltd., Atlas Copco (I) Ltd. & many other small scale Industries in Bhosari, Chakan Pune MIDC area. We not only ensure that your deadline is met and at the same time we will ensure that all aspects of your project would confirm to the main concept. This will leave no doubt that your projects worked through us will meet with success. It is our corporate philosophy to provide quality and creative work with the minimum of inconvenience to our customers and at affordable expenses.

1. VT004_00_FIX_ASSY_031 Page 1 of 5
Project
SP CAD
DELCAM PLC
Talbot Way Telephone: 0121 766 55 44 E-mail: marketing@delcam.com
Small Heath Business Park Fax: 0121 766 55 11 Web Site: http://www.delcam.com
Birmingham B10 0HJ, UK
Customer Venus Tecnology Inspector YUVRAJ
Description VT004_00_FIX_ASSY_031 Customer contact
Part No. Customer phone No.
Drawing number Your drawing number Customer fax No.
Datum Report Type PDF FILE
Measure:Master part
BASE PLATE PLANE (Datum - RPS Alignment 1::)
Maximum Measured Error
Flatness 0.100 0.073 -
Number of probed points: 4
RPS ALIGNMENT
06/14/2010

2. VT004_00_FIX_ASSY_031 Page 2 of 5
TOOLING HOLE 1 (Datum - RPS Alignment 1::)
Hi-Tol Lo-Tol Nominal Measured Deviation Error
Centre
X 0.100 -0.100 -150.000 -150.000 0.000 -
Y 0.100 -0.100 -25.000 -25.000 -0.000 -
Z 0.100 -0.100 -400.000 -399.974 0.026 -
Diameter 0.100 -0.100 10.000 10.085 0.085 -
Number of probed points: 3
TOOLING HOLE 2 (Datum - RPS Alignment 1::)
Hi-Tol Lo-Tol Nominal Measured Deviation Error
Centre
X 0.100 -0.100 -150.000 -150.000 -0.000 -
Y 0.100 -0.100 -25.000 -25.000 -0.000 -
Z 0.100 -0.100 0.000 -0.026 -0.026 -
Diameter 0.100 -0.100 10.000 10.050 0.050 -
Number of probed points: 3
RPS ALIGNMENT
LOCATING PIN 1 (Datum - RPS Alignment 1)
Hi-Tol Lo-Tol Nominal Measured Deviation Error
Centre
Y 0.100 -0.100 153.150 153.094 -0.056 -
Z 0.100 -0.100 -334.900 -334.958 -0.058 -
Number of probed points: 3
LOCATING PIN 2 (Datum - RPS Alignment 1)
Hi-Tol Lo-Tol Nominal Measured Deviation Error
Centre
Y 0.100 -0.100 104.000 104.089 0.089 -
Z 0.100 -0.100 -35.000 -35.099 -0.099 -
Diameter 0.100 -0.100 40.000 39.917 -0.083 -
Number of probed points: 3
LOCATING PINS
SP-1 0.000 -0.200 0.200 -22.000 -12.406 -330.656 -0.155 0.000 0.000 0.155
SP-2 0.000 -0.200 0.200 -22.000 69.093 -329.535 -0.182 0.000 0.000 0.182
SP-3 0.000 -0.200 0.200 -22.000 72.831 -296.228 -0.013 -0.000 0.000 0.013
SP-4 0.000 -0.200 0.200 -22.000 22.417 -296.583 -0.000 0.000 0.000 0.000
SP-5 0.000 -0.200 0.200 -22.000 -12.500 -295.328 0.014 -0.000 0.000 -0.014
SP-6 0.000 -0.200 0.200 -22.000 29.853 -316.609 -0.105 0.000 0.000 0.105
SP-7 0.000 -0.200 0.200 14.000 1.062 -162.820 0.030 0.000 -0.000 -0.030
SP-8 0.000 -0.200 0.200 14.000 -15.026 -205.128 -0.072 -0.000 0.000 0.072
SP-9 0.000 -0.200 0.200 14.000 -14.032 -234.692 -0.051 0.000 0.000 0.051
SP-10 0.000 -0.200 0.200 -79.378 13.977 -60.000 0.000 -0.000 0.050 0.050
SP-11 0.000 -0.200 0.200 -141.735 -12.834 -60.000 0.000 0.000 0.036 0.036
SP-12 0.000 -0.200 0.200 -108.213 26.288 -60.000 0.000 0.000 0.095 0.095
SP-13 0.000 -0.200 0.200 29.131 84.002 -35.277 0.000 0.106 0.001 0.106
SP-14 0.000 -0.200 0.200 24.503 105.643 -54.932 0.000 0.003 -0.033 -0.033
SP-15 0.000 -0.200 0.200 14.000 194.328 -235.230 -0.086 -0.000 0.000 0.086
SP-16 0.000 -0.200 0.200 14.000 192.446 -160.946 -0.092 0.000 0.000 0.092
Name Offset Lo.Tol. Hi.Tol. X Y Z dX dY dZ DL
Inspection Group
Datum - RPS Alignment 1
06/14/2010

3. VT004_00_FIX_ASSY_031 Page 3 of 5
SP-17 0.000 -0.200 0.200 14.000 103.528 -156.990 0.040 0.000 0.000 -0.040
SP-18 0.000 -0.200 0.200 14.000 101.408 -244.451 0.016 0.000 0.000 -0.016
SP-19 0.000 -0.200 0.200 -136.170 83.500 -76.506 0.000 0.006 0.000 0.006
SP-20 0.000 -0.200 0.200 -77.071 83.500 -67.193 0.000 0.083 0.000 0.083
SP-21 0.000 -0.200 0.200 -153.133 83.500 -96.071 0.000 0.107 0.000 0.107
SP-22 0.000 -0.200 0.200 -72.489 83.500 -100.028 0.000 -0.058 -0.000 -0.058
Name Offset Lo.Tol. Hi.Tol. X Y Z dX dY dZ DL
Number of points 22
Out of tolerance 0
Performance 100%
Mean 0.048
Std. Deviation 0.065
Max. Value 0.182
Min. Value -0.058
Inspection Group
Datum - RPS Alignment 1
06/14/2010
0.220
0.147
0.073
0.000
-0.073
-0.147
-0.220
0
1
2
3
4
0.0
0.1
0.2
0.3
0.4
0.5

4. VT004_00_FIX_ASSY_031 Page 4 of 5
CAD View
06/14/2010

5. VT004_00_FIX_ASSY_031 Page 5 of 5
CAD View
Number of controlled parts
Inspector's name YUVRAJ
06/14/2010