Modern LED luminaire: Biodynamic and IoT Ready
•
0 likes•18 views
CircaLED-IR enabled the luminaire various smart features including the Circadian control for human-centric lighting autonomously and remotely via the latest Bluetooth 5 Mesh networking suitable for smart cities, industry and commercial applications.
Report
Share
Report
Share
Download to read offline
Recommended
WearableAgency - We develop home automation application
Home automation involves introducing a degree of computerized or automatic control to certain electrical and electronics system in a building.
These lighting, temperature control, etc.., this paper demonstrate a simple home automation system which contains a remote mobile host controller and several client module (home appliances).
The client modules communicate with host controllers through a wireless device such as a Bluetooth enabled mobile phone, in this case, an android based smart phone.
DIPLOMA IN ELECTRICAL PROJECT TITLES:remote switching system for home appliances
Remote Switching System for home appliances
In past days Infrared and cable Synchronizing were used instead of Bluetooth. The major drawbacks in these two are in infrared the TX and Rx have to be lined up with each other, Interference between devices is uncommon. The cable synchronizing is a little more troublesome than infrared. So to overcome these problems RF Wireless Transmitter & Receiver Modules were Used.
Description of the Project:
This project is used to automate the house and the same can be applied to an industry also. This project has a provision for Switching of house hold devices like Fan, Tube lights, Televisions etc through telephone from a remote handheld device from anywhere in the house. This is achieved with the use of an Embedded Microcontroller and a RF TX and RX Module. The handheld device has a keypad which is used to switch on or switch off a device.
Home automation
home automation is smart home which is basic need of today lifestyle from we are trying to solve this problem.
Home Automation using a Cell Phone
This document outlines a home automation system using wireless control that can be built for 15,000-20,000 rupees. The system allows remote and automatic control of devices in the home using a cell phone. It utilizes a Raspberry Pi, Wi-Fi router, relays, electronic switches and programming languages to control devices from anywhere. The home automation industry is growing and was worth 19.52 billion in 2012 and projected to be worth 48.02 billion by 2018, providing motivation for the project.
SMART HOME TECHS
Home automation or domotics is building automation for a home, called a smart home or smart house. A home automation system will control lighting, climate, entertainment systems, and appliances. It may also include home security such as access control and alarm systems.
Home automation and securty using wireless networks
The document describes a home automation project that allows users to remotely control home appliances via SMS messages sent to a microcontroller. The transmitting end is a cell phone that can send SMS messages. The receiving end includes a microcontroller, GSM module, relays and other components to receive SMS commands and control appliances. The system uses AT commands to send and receive SMS messages to remotely control devices like heaters and security systems. Future enhancements proposed include adding timers, sensors and hidden cameras for improved security and automation.
Projects Using Arduino UNO
IDENTICAL TOPICS IN ARDUINO UNO PROJECTS
UTMOST ELEMENTS IN ARDUINO PROJECTS
TOPICAL TECHNOLOGIES IN ARDUINO UNO
Home Appliances Controlling Mobile through Bluetooth with gantt chart
This document outlines a project proposal to develop a system for controlling home appliances using an Android mobile device via Bluetooth. The objectives are to create a hardware device, develop a software application, and assemble the hardware to allow users to control devices through their mobile. Screenshots of the proposed app are included, as well as a Gantt chart, overview of the modular design, and request for any questions.
Recommended
WearableAgency - We develop home automation application
Home automation involves introducing a degree of computerized or automatic control to certain electrical and electronics system in a building.
These lighting, temperature control, etc.., this paper demonstrate a simple home automation system which contains a remote mobile host controller and several client module (home appliances).
The client modules communicate with host controllers through a wireless device such as a Bluetooth enabled mobile phone, in this case, an android based smart phone.
DIPLOMA IN ELECTRICAL PROJECT TITLES:remote switching system for home appliances
Remote Switching System for home appliances
In past days Infrared and cable Synchronizing were used instead of Bluetooth. The major drawbacks in these two are in infrared the TX and Rx have to be lined up with each other, Interference between devices is uncommon. The cable synchronizing is a little more troublesome than infrared. So to overcome these problems RF Wireless Transmitter & Receiver Modules were Used.
Description of the Project:
This project is used to automate the house and the same can be applied to an industry also. This project has a provision for Switching of house hold devices like Fan, Tube lights, Televisions etc through telephone from a remote handheld device from anywhere in the house. This is achieved with the use of an Embedded Microcontroller and a RF TX and RX Module. The handheld device has a keypad which is used to switch on or switch off a device.
Home automation
home automation is smart home which is basic need of today lifestyle from we are trying to solve this problem.
Home Automation using a Cell Phone
This document outlines a home automation system using wireless control that can be built for 15,000-20,000 rupees. The system allows remote and automatic control of devices in the home using a cell phone. It utilizes a Raspberry Pi, Wi-Fi router, relays, electronic switches and programming languages to control devices from anywhere. The home automation industry is growing and was worth 19.52 billion in 2012 and projected to be worth 48.02 billion by 2018, providing motivation for the project.
SMART HOME TECHS
Home automation or domotics is building automation for a home, called a smart home or smart house. A home automation system will control lighting, climate, entertainment systems, and appliances. It may also include home security such as access control and alarm systems.
Home automation and securty using wireless networks
The document describes a home automation project that allows users to remotely control home appliances via SMS messages sent to a microcontroller. The transmitting end is a cell phone that can send SMS messages. The receiving end includes a microcontroller, GSM module, relays and other components to receive SMS commands and control appliances. The system uses AT commands to send and receive SMS messages to remotely control devices like heaters and security systems. Future enhancements proposed include adding timers, sensors and hidden cameras for improved security and automation.
Projects Using Arduino UNO
IDENTICAL TOPICS IN ARDUINO UNO PROJECTS
UTMOST ELEMENTS IN ARDUINO PROJECTS
TOPICAL TECHNOLOGIES IN ARDUINO UNO
Home Appliances Controlling Mobile through Bluetooth with gantt chart
This document outlines a project proposal to develop a system for controlling home appliances using an Android mobile device via Bluetooth. The objectives are to create a hardware device, develop a software application, and assemble the hardware to allow users to control devices through their mobile. Screenshots of the proposed app are included, as well as a Gantt chart, overview of the modular design, and request for any questions.
Xcellity Home appliance control_using_android_application
This document describes a smart home application that allows control of home appliances using an Android application. The goal of the project is to develop a home automation system controlled remotely from an Android mobile app. The basic system involves sending commands from the Android app through wireless communication to a controller that commands the appliances. Different wireless communication methods like Bluetooth, Zigbee and Wi-Fi are discussed. The home automation system uses an Arduino board, Bluetooth device and Android mobile to control appliances through relay systems for on/off control and voltage variation. Control methods include on/off control of lights and devices, dimming fans with voltage variation, and gas leakage detection.
Arduino Projects for Engineering Students
SALIENT TITLES IN ARDUINO PROJECTS FOR ENGINEERING
TOPICAL TECHNOLOGIES IN ARDUINO
FOREMOST TRENDS IN DIGITAL ARDUINO THESIS
Low energy based home control system using android app
This document describes a smart home control system that allows users to control home devices like lights, fans, music, and security through an Android application. The system uses an MSP430G2553 microcontroller, relay modules, PIR sensors, Bluetooth, and an RTC to enable wireless control and integrate home security. It aims to reduce energy consumption and costs while providing a compact, reliable, easy to use, and secure smart home solution. Key components are described, including their functions and benefits for low power consumption, wireless communication, and automation. Potential applications and extensions are also discussed.
IOT Projects Using Arduino
HECTIC SUBJECTS IN IOT PROJECTS USING ARDUINO
MAJOR WIFI SHIELDS IN IOT WITH ARDUINO
EMERGENT CONCEPTS IN IOT PROJECTS USING ARDUINO
01 data communications; analog & digital signal
This document discusses analog and digital signals used for data communication. Analog signals are continuous over time and value, while digital signals are discrete using binary numbers. Some key differences are that analog signals can be affected by noise during transmission while digital signals are noise-immune, analog devices typically draw more power than digital, and digital signals are better suited for computing and memory storage while analog is used for audio/video. Examples of analog signals include voices and speedometers, while digital examples include computers, cameras and watches.
Azoteq - Novel solutions for PIR sensing
Azoteq offers a novel approach to PIR sensing.
Replace analog amplifiers with a smart controller:
Reduced BOM
Enhanced functionality
Multi-sensor value added
TYPICAL USES:
Smart Lights
Alarm Systems
Movement detection
Room occupancy detection
Smart Home Systems
Under Cabinet Lighting (UCL)
Night Lights
Standard PIR sensor cost reduction
Battery powered PIR sensor solutions
ADVANTAGES OF PIR WITH ProxFusion OVER CONVENTIONAL CIRCUITRY:
Raw data output for smart DSP algorithm
Adjustable sensitivity (gain) via I2C
Less components required
Smaller PCB and less PCB layers required
Multiple features (PIR/tamper detection/magnetic switch/ALS) on one IC
Two PIR elements measured by one IC
Low power consumption - IQS62x current less than 6uA (fs– 10Hz)
Less MCU processing required
Smart tamper detection
SNR: 38dB
ADDITIONAL CAPABILITIES
Simple algorithm for direction & speed detection.
Phase, magnitude and correlation data are easily extracted for Smart Sensing abilities from a single IC solution.
Home automation using IoT
This document discusses a home automation project using Internet of Things (IoT) technology. The project aims to automate household activities and appliances like lighting, HVAC, entertainment, and security using wireless connectivity. Key components include ESP8266 WiFi modules, transistors, relays, and other basic electronic components. The system is designed to improve convenience, comfort, energy efficiency, and security for homeowners while keeping the system affordable and simple to use. Quality assurance methods like failure testing and statistical control are applied to ensure requirements are fulfilled.
Bluetooth based home automation using Arduino UNO
This document presents an Arduino-based home automation system using Bluetooth. It introduces the project, includes a block diagram, lists the hardware requirements, and describes the process for making a relay circuit. It explains the components used - Arduino UNO, Bluetooth module, relay, transistors and resistors. Software used is Arduino IDE. Advantages are convenience and energy savings. Disadvantages include limited range and number of devices controlled. Future work proposes using Ethernet and WiFi for remote control from anywhere.
Home automation using android mobiles
This document discusses home automation through an Android mobile device. It describes a system where a Bluetooth module and relays are used to allow an Android phone to remotely control home appliances. The phone acts as the host controller, communicating with client modules attached to devices via Bluetooth. The system allows users to control lights, temperature and other electronics from their mobile device.
IOT Projects Using Arduino UNO
DISTINCTIVE TOPICS IN IOT PROJECTS USING ARDUINO
EMINENT TITLES IN IOT PROJECTS USING ARDUINO
ECCENTRIC SUBJECTS IN IOT PROJECTS USING ARDUINO
Smart homes using android
This document discusses how to create a smart home system using Android and open source software. It describes OpenRemote (OR) software which can be used to control devices over different protocols from a phone app. The Itach WF2IR hardware allows sending infrared signals to devices from an Android device. The document provides steps to set up the OR controller and app, configure the WF2IR, integrate commands, and troubleshoot issues. It also discusses using the Android Open Accessory Development Kit to control robots with an Android device.
Anandtronics Company presentation
Anandtronics is an electronic component supplier established in 2009 in Chennai, India. They supply semiconductors, connectors, switches, power supplies, and wireless modules. They are an authorized distributor for Bulgin IP68 connectors, Arco Electric switches, and Electron Technology industrial components. Their product range includes semiconductors, wireless devices, power supplies, and connectors for applications in various industries.
IR Based Home Automation
This document describes an IR home automation system that uses an ATMega16 microcontroller and NEC protocol to remotely control electrical appliances via an IR remote receiver. The system components include an ATmega16 microcontroller, TSOP1738 IR sensor, ULN2003 relay driver, relay board, LCD display, STK200 programmer, power supply, and LM7805 voltage regulator. It transmits IR signals using the NEC protocol, which encodes 16-bit addresses and 8-bit data codes that are transmitted using pulse position modulation to represent logic states. Diagrams illustrate the NEC protocol timing and the main system board with its components.
InterAct Pro viedie risinājumu uzņēmumu apgaismojumā
This document introduces Interact Pro, an intuitive dashboard and app that brings the power of IoT connected lighting to small and medium enterprises. Interact Pro allows business owners to manage lighting scenes, schedules, and customize lighting via a smartphone app. It also provides installers user and project management tools. The system includes Philips Interact Ready luminaires, sensors, switches and a gateway to wirelessly connect the lighting system and provide energy insights and control via the Interact Pro software.
Smart home
Technology is triggering a change in the way we live, the desire we pursue and expectations of what is possible.
smart home has so much attention and is a promising technology for increased comfort, safety and security.
With smart home technologies, household items, such as lamps, and locks, are becoming connected wirelessly and smarter.
E sense organic- plug and play wireless lighting controls
e-Sense Organic is a smart lighting control system that is easy to install without programming. It uses distributed intelligence where each luminaire contains a sensor and communicates wirelessly with nearby luminaires to respond to occupancy and daylight. This creates an "Occupancy Information Cloud" to provide energy-efficient lighting control for open plan offices and other similar spaces. The system is plug-and-play as it does not require any external sensors, routers or control panels to operate.
leewayhertz.com-AI in predictive maintenance Use cases technologies benefits ...
Predictive maintenance is a proactive approach that anticipates equipment failures before they happen. At the forefront of this innovative strategy is Artificial Intelligence (AI), which brings unprecedented precision and efficiency. AI in predictive maintenance is transforming industries by reducing downtime, minimizing costs, and enhancing productivity.
Salesforce Integration for Bonterra Impact Management (fka Social Solutions A...
Sidekick Solutions uses Bonterra Impact Management (fka Social Solutions Apricot) and automation solutions to integrate data for business workflows.
We believe integration and automation are essential to user experience and the promise of efficient work through technology. Automation is the critical ingredient to realizing that full vision. We develop integration products and services for Bonterra Case Management software to support the deployment of automations for a variety of use cases.
This video focuses on integration of Salesforce with Bonterra Impact Management.
Interested in deploying an integration with Salesforce for Bonterra Impact Management? Contact us at sales@sidekicksolutionsllc.com to discuss next steps.
Skybuffer SAM4U tool for SAP license adoption
Manage and optimize your license adoption and consumption with SAM4U, an SAP free customer software asset management tool.
SAM4U, an SAP complimentary software asset management tool for customers, delivers a detailed and well-structured overview of license inventory and usage with a user-friendly interface. We offer a hosted, cost-effective, and performance-optimized SAM4U setup in the Skybuffer Cloud environment. You retain ownership of the system and data, while we manage the ABAP 7.58 infrastructure, ensuring fixed Total Cost of Ownership (TCO) and exceptional services through the SAP Fiori interface.
HCL Notes and Domino License Cost Reduction in the World of DLAU
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-and-domino-license-cost-reduction-in-the-world-of-dlau/
The introduction of DLAU and the CCB & CCX licensing model caused quite a stir in the HCL community. As a Notes and Domino customer, you may have faced challenges with unexpected user counts and license costs. You probably have questions on how this new licensing approach works and how to benefit from it. Most importantly, you likely have budget constraints and want to save money where possible. Don’t worry, we can help with all of this!
We’ll show you how to fix common misconfigurations that cause higher-than-expected user counts, and how to identify accounts which you can deactivate to save money. There are also frequent patterns that can cause unnecessary cost, like using a person document instead of a mail-in for shared mailboxes. We’ll provide examples and solutions for those as well. And naturally we’ll explain the new licensing model.
Join HCL Ambassador Marc Thomas in this webinar with a special guest appearance from Franz Walder. It will give you the tools and know-how to stay on top of what is going on with Domino licensing. You will be able lower your cost through an optimized configuration and keep it low going forward.
These topics will be covered
- Reducing license cost by finding and fixing misconfigurations and superfluous accounts
- How do CCB and CCX licenses really work?
- Understanding the DLAU tool and how to best utilize it
- Tips for common problem areas, like team mailboxes, functional/test users, etc
- Practical examples and best practices to implement right away
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAU
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-und-domino-lizenzkostenreduzierung-in-der-welt-von-dlau/
DLAU und die Lizenzen nach dem CCB- und CCX-Modell sind für viele in der HCL-Community seit letztem Jahr ein heißes Thema. Als Notes- oder Domino-Kunde haben Sie vielleicht mit unerwartet hohen Benutzerzahlen und Lizenzgebühren zu kämpfen. Sie fragen sich vielleicht, wie diese neue Art der Lizenzierung funktioniert und welchen Nutzen sie Ihnen bringt. Vor allem wollen Sie sicherlich Ihr Budget einhalten und Kosten sparen, wo immer möglich. Das verstehen wir und wir möchten Ihnen dabei helfen!
Wir erklären Ihnen, wie Sie häufige Konfigurationsprobleme lösen können, die dazu führen können, dass mehr Benutzer gezählt werden als nötig, und wie Sie überflüssige oder ungenutzte Konten identifizieren und entfernen können, um Geld zu sparen. Es gibt auch einige Ansätze, die zu unnötigen Ausgaben führen können, z. B. wenn ein Personendokument anstelle eines Mail-Ins für geteilte Mailboxen verwendet wird. Wir zeigen Ihnen solche Fälle und deren Lösungen. Und natürlich erklären wir Ihnen das neue Lizenzmodell.
Nehmen Sie an diesem Webinar teil, bei dem HCL-Ambassador Marc Thomas und Gastredner Franz Walder Ihnen diese neue Welt näherbringen. Es vermittelt Ihnen die Tools und das Know-how, um den Überblick zu bewahren. Sie werden in der Lage sein, Ihre Kosten durch eine optimierte Domino-Konfiguration zu reduzieren und auch in Zukunft gering zu halten.
Diese Themen werden behandelt
- Reduzierung der Lizenzkosten durch Auffinden und Beheben von Fehlkonfigurationen und überflüssigen Konten
- Wie funktionieren CCB- und CCX-Lizenzen wirklich?
- Verstehen des DLAU-Tools und wie man es am besten nutzt
- Tipps für häufige Problembereiche, wie z. B. Team-Postfächer, Funktions-/Testbenutzer usw.
- Praxisbeispiele und Best Practices zum sofortigen Umsetzen
Your One-Stop Shop for Python Success: Top 10 US Python Development Providers
Simplify your search for a reliable Python development partner! This list presents the top 10 trusted US providers offering comprehensive Python development services, ensuring your project's success from conception to completion.
More Related Content
What's hot
Xcellity Home appliance control_using_android_application
This document describes a smart home application that allows control of home appliances using an Android application. The goal of the project is to develop a home automation system controlled remotely from an Android mobile app. The basic system involves sending commands from the Android app through wireless communication to a controller that commands the appliances. Different wireless communication methods like Bluetooth, Zigbee and Wi-Fi are discussed. The home automation system uses an Arduino board, Bluetooth device and Android mobile to control appliances through relay systems for on/off control and voltage variation. Control methods include on/off control of lights and devices, dimming fans with voltage variation, and gas leakage detection.
Arduino Projects for Engineering Students
SALIENT TITLES IN ARDUINO PROJECTS FOR ENGINEERING
TOPICAL TECHNOLOGIES IN ARDUINO
FOREMOST TRENDS IN DIGITAL ARDUINO THESIS
Low energy based home control system using android app
This document describes a smart home control system that allows users to control home devices like lights, fans, music, and security through an Android application. The system uses an MSP430G2553 microcontroller, relay modules, PIR sensors, Bluetooth, and an RTC to enable wireless control and integrate home security. It aims to reduce energy consumption and costs while providing a compact, reliable, easy to use, and secure smart home solution. Key components are described, including their functions and benefits for low power consumption, wireless communication, and automation. Potential applications and extensions are also discussed.
IOT Projects Using Arduino
HECTIC SUBJECTS IN IOT PROJECTS USING ARDUINO
MAJOR WIFI SHIELDS IN IOT WITH ARDUINO
EMERGENT CONCEPTS IN IOT PROJECTS USING ARDUINO
01 data communications; analog & digital signal
This document discusses analog and digital signals used for data communication. Analog signals are continuous over time and value, while digital signals are discrete using binary numbers. Some key differences are that analog signals can be affected by noise during transmission while digital signals are noise-immune, analog devices typically draw more power than digital, and digital signals are better suited for computing and memory storage while analog is used for audio/video. Examples of analog signals include voices and speedometers, while digital examples include computers, cameras and watches.
Azoteq - Novel solutions for PIR sensing
Azoteq offers a novel approach to PIR sensing.
Replace analog amplifiers with a smart controller:
Reduced BOM
Enhanced functionality
Multi-sensor value added
TYPICAL USES:
Smart Lights
Alarm Systems
Movement detection
Room occupancy detection
Smart Home Systems
Under Cabinet Lighting (UCL)
Night Lights
Standard PIR sensor cost reduction
Battery powered PIR sensor solutions
ADVANTAGES OF PIR WITH ProxFusion OVER CONVENTIONAL CIRCUITRY:
Raw data output for smart DSP algorithm
Adjustable sensitivity (gain) via I2C
Less components required
Smaller PCB and less PCB layers required
Multiple features (PIR/tamper detection/magnetic switch/ALS) on one IC
Two PIR elements measured by one IC
Low power consumption - IQS62x current less than 6uA (fs– 10Hz)
Less MCU processing required
Smart tamper detection
SNR: 38dB
ADDITIONAL CAPABILITIES
Simple algorithm for direction & speed detection.
Phase, magnitude and correlation data are easily extracted for Smart Sensing abilities from a single IC solution.
Home automation using IoT
This document discusses a home automation project using Internet of Things (IoT) technology. The project aims to automate household activities and appliances like lighting, HVAC, entertainment, and security using wireless connectivity. Key components include ESP8266 WiFi modules, transistors, relays, and other basic electronic components. The system is designed to improve convenience, comfort, energy efficiency, and security for homeowners while keeping the system affordable and simple to use. Quality assurance methods like failure testing and statistical control are applied to ensure requirements are fulfilled.
Bluetooth based home automation using Arduino UNO
This document presents an Arduino-based home automation system using Bluetooth. It introduces the project, includes a block diagram, lists the hardware requirements, and describes the process for making a relay circuit. It explains the components used - Arduino UNO, Bluetooth module, relay, transistors and resistors. Software used is Arduino IDE. Advantages are convenience and energy savings. Disadvantages include limited range and number of devices controlled. Future work proposes using Ethernet and WiFi for remote control from anywhere.
Home automation using android mobiles
This document discusses home automation through an Android mobile device. It describes a system where a Bluetooth module and relays are used to allow an Android phone to remotely control home appliances. The phone acts as the host controller, communicating with client modules attached to devices via Bluetooth. The system allows users to control lights, temperature and other electronics from their mobile device.
IOT Projects Using Arduino UNO
DISTINCTIVE TOPICS IN IOT PROJECTS USING ARDUINO
EMINENT TITLES IN IOT PROJECTS USING ARDUINO
ECCENTRIC SUBJECTS IN IOT PROJECTS USING ARDUINO
Smart homes using android
This document discusses how to create a smart home system using Android and open source software. It describes OpenRemote (OR) software which can be used to control devices over different protocols from a phone app. The Itach WF2IR hardware allows sending infrared signals to devices from an Android device. The document provides steps to set up the OR controller and app, configure the WF2IR, integrate commands, and troubleshoot issues. It also discusses using the Android Open Accessory Development Kit to control robots with an Android device.
Anandtronics Company presentation
Anandtronics is an electronic component supplier established in 2009 in Chennai, India. They supply semiconductors, connectors, switches, power supplies, and wireless modules. They are an authorized distributor for Bulgin IP68 connectors, Arco Electric switches, and Electron Technology industrial components. Their product range includes semiconductors, wireless devices, power supplies, and connectors for applications in various industries.
IR Based Home Automation
This document describes an IR home automation system that uses an ATMega16 microcontroller and NEC protocol to remotely control electrical appliances via an IR remote receiver. The system components include an ATmega16 microcontroller, TSOP1738 IR sensor, ULN2003 relay driver, relay board, LCD display, STK200 programmer, power supply, and LM7805 voltage regulator. It transmits IR signals using the NEC protocol, which encodes 16-bit addresses and 8-bit data codes that are transmitted using pulse position modulation to represent logic states. Diagrams illustrate the NEC protocol timing and the main system board with its components.
InterAct Pro viedie risinājumu uzņēmumu apgaismojumā
This document introduces Interact Pro, an intuitive dashboard and app that brings the power of IoT connected lighting to small and medium enterprises. Interact Pro allows business owners to manage lighting scenes, schedules, and customize lighting via a smartphone app. It also provides installers user and project management tools. The system includes Philips Interact Ready luminaires, sensors, switches and a gateway to wirelessly connect the lighting system and provide energy insights and control via the Interact Pro software.
Smart home
Technology is triggering a change in the way we live, the desire we pursue and expectations of what is possible.
smart home has so much attention and is a promising technology for increased comfort, safety and security.
With smart home technologies, household items, such as lamps, and locks, are becoming connected wirelessly and smarter.
E sense organic- plug and play wireless lighting controls
e-Sense Organic is a smart lighting control system that is easy to install without programming. It uses distributed intelligence where each luminaire contains a sensor and communicates wirelessly with nearby luminaires to respond to occupancy and daylight. This creates an "Occupancy Information Cloud" to provide energy-efficient lighting control for open plan offices and other similar spaces. The system is plug-and-play as it does not require any external sensors, routers or control panels to operate.
What's hot (16)
Xcellity Home appliance control_using_android_application
Xcellity Home appliance control_using_android_application
Low energy based home control system using android app
Low energy based home control system using android app
01 data communications; analog & digital signal
01 data communications; analog & digital signal
InterAct Pro viedie risinājumu uzņēmumu apgaismojumā
InterAct Pro viedie risinājumu uzņēmumu apgaismojumā
E sense organic- plug and play wireless lighting controls
E sense organic- plug and play wireless lighting controls
Recently uploaded
leewayhertz.com-AI in predictive maintenance Use cases technologies benefits ...
Predictive maintenance is a proactive approach that anticipates equipment failures before they happen. At the forefront of this innovative strategy is Artificial Intelligence (AI), which brings unprecedented precision and efficiency. AI in predictive maintenance is transforming industries by reducing downtime, minimizing costs, and enhancing productivity.
Salesforce Integration for Bonterra Impact Management (fka Social Solutions A...
Sidekick Solutions uses Bonterra Impact Management (fka Social Solutions Apricot) and automation solutions to integrate data for business workflows.
We believe integration and automation are essential to user experience and the promise of efficient work through technology. Automation is the critical ingredient to realizing that full vision. We develop integration products and services for Bonterra Case Management software to support the deployment of automations for a variety of use cases.
This video focuses on integration of Salesforce with Bonterra Impact Management.
Interested in deploying an integration with Salesforce for Bonterra Impact Management? Contact us at sales@sidekicksolutionsllc.com to discuss next steps.
Skybuffer SAM4U tool for SAP license adoption
Manage and optimize your license adoption and consumption with SAM4U, an SAP free customer software asset management tool.
SAM4U, an SAP complimentary software asset management tool for customers, delivers a detailed and well-structured overview of license inventory and usage with a user-friendly interface. We offer a hosted, cost-effective, and performance-optimized SAM4U setup in the Skybuffer Cloud environment. You retain ownership of the system and data, while we manage the ABAP 7.58 infrastructure, ensuring fixed Total Cost of Ownership (TCO) and exceptional services through the SAP Fiori interface.
HCL Notes and Domino License Cost Reduction in the World of DLAU
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-and-domino-license-cost-reduction-in-the-world-of-dlau/
The introduction of DLAU and the CCB & CCX licensing model caused quite a stir in the HCL community. As a Notes and Domino customer, you may have faced challenges with unexpected user counts and license costs. You probably have questions on how this new licensing approach works and how to benefit from it. Most importantly, you likely have budget constraints and want to save money where possible. Don’t worry, we can help with all of this!
We’ll show you how to fix common misconfigurations that cause higher-than-expected user counts, and how to identify accounts which you can deactivate to save money. There are also frequent patterns that can cause unnecessary cost, like using a person document instead of a mail-in for shared mailboxes. We’ll provide examples and solutions for those as well. And naturally we’ll explain the new licensing model.
Join HCL Ambassador Marc Thomas in this webinar with a special guest appearance from Franz Walder. It will give you the tools and know-how to stay on top of what is going on with Domino licensing. You will be able lower your cost through an optimized configuration and keep it low going forward.
These topics will be covered
- Reducing license cost by finding and fixing misconfigurations and superfluous accounts
- How do CCB and CCX licenses really work?
- Understanding the DLAU tool and how to best utilize it
- Tips for common problem areas, like team mailboxes, functional/test users, etc
- Practical examples and best practices to implement right away
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAU
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-und-domino-lizenzkostenreduzierung-in-der-welt-von-dlau/
DLAU und die Lizenzen nach dem CCB- und CCX-Modell sind für viele in der HCL-Community seit letztem Jahr ein heißes Thema. Als Notes- oder Domino-Kunde haben Sie vielleicht mit unerwartet hohen Benutzerzahlen und Lizenzgebühren zu kämpfen. Sie fragen sich vielleicht, wie diese neue Art der Lizenzierung funktioniert und welchen Nutzen sie Ihnen bringt. Vor allem wollen Sie sicherlich Ihr Budget einhalten und Kosten sparen, wo immer möglich. Das verstehen wir und wir möchten Ihnen dabei helfen!
Wir erklären Ihnen, wie Sie häufige Konfigurationsprobleme lösen können, die dazu führen können, dass mehr Benutzer gezählt werden als nötig, und wie Sie überflüssige oder ungenutzte Konten identifizieren und entfernen können, um Geld zu sparen. Es gibt auch einige Ansätze, die zu unnötigen Ausgaben führen können, z. B. wenn ein Personendokument anstelle eines Mail-Ins für geteilte Mailboxen verwendet wird. Wir zeigen Ihnen solche Fälle und deren Lösungen. Und natürlich erklären wir Ihnen das neue Lizenzmodell.
Nehmen Sie an diesem Webinar teil, bei dem HCL-Ambassador Marc Thomas und Gastredner Franz Walder Ihnen diese neue Welt näherbringen. Es vermittelt Ihnen die Tools und das Know-how, um den Überblick zu bewahren. Sie werden in der Lage sein, Ihre Kosten durch eine optimierte Domino-Konfiguration zu reduzieren und auch in Zukunft gering zu halten.
Diese Themen werden behandelt
- Reduzierung der Lizenzkosten durch Auffinden und Beheben von Fehlkonfigurationen und überflüssigen Konten
- Wie funktionieren CCB- und CCX-Lizenzen wirklich?
- Verstehen des DLAU-Tools und wie man es am besten nutzt
- Tipps für häufige Problembereiche, wie z. B. Team-Postfächer, Funktions-/Testbenutzer usw.
- Praxisbeispiele und Best Practices zum sofortigen Umsetzen
Your One-Stop Shop for Python Success: Top 10 US Python Development Providers
Simplify your search for a reliable Python development partner! This list presents the top 10 trusted US providers offering comprehensive Python development services, ensuring your project's success from conception to completion.
Taking AI to the Next Level in Manufacturing.pdf
Read Taking AI to the Next Level in Manufacturing to gain insights on AI adoption in the manufacturing industry, such as:
1. How quickly AI is being implemented in manufacturing.
2. Which barriers stand in the way of AI adoption.
3. How data quality and governance form the backbone of AI.
4. Organizational processes and structures that may inhibit effective AI adoption.
6. Ideas and approaches to help build your organization's AI strategy.
Programming Foundation Models with DSPy - Meetup Slides
Prompting language models is hard, while programming language models is easy. In this talk, I will discuss the state-of-the-art framework DSPy for programming foundation models with its powerful optimizers and runtime constraint system.
Building Production Ready Search Pipelines with Spark and Milvus
Spark is the widely used ETL tool for processing, indexing and ingesting data to serving stack for search. Milvus is the production-ready open-source vector database. In this talk we will show how to use Spark to process unstructured data to extract vector representations, and push the vectors to Milvus vector database for search serving.
Artificial Intelligence for XMLDevelopment
In the rapidly evolving landscape of technologies, XML continues to play a vital role in structuring, storing, and transporting data across diverse systems. The recent advancements in artificial intelligence (AI) present new methodologies for enhancing XML development workflows, introducing efficiency, automation, and intelligent capabilities. This presentation will outline the scope and perspective of utilizing AI in XML development. The potential benefits and the possible pitfalls will be highlighted, providing a balanced view of the subject.
We will explore the capabilities of AI in understanding XML markup languages and autonomously creating structured XML content. Additionally, we will examine the capacity of AI to enrich plain text with appropriate XML markup. Practical examples and methodological guidelines will be provided to elucidate how AI can be effectively prompted to interpret and generate accurate XML markup.
Further emphasis will be placed on the role of AI in developing XSLT, or schemas such as XSD and Schematron. We will address the techniques and strategies adopted to create prompts for generating code, explaining code, or refactoring the code, and the results achieved.
The discussion will extend to how AI can be used to transform XML content. In particular, the focus will be on the use of AI XPath extension functions in XSLT, Schematron, Schematron Quick Fixes, or for XML content refactoring.
The presentation aims to deliver a comprehensive overview of AI usage in XML development, providing attendees with the necessary knowledge to make informed decisions. Whether you’re at the early stages of adopting AI or considering integrating it in advanced XML development, this presentation will cover all levels of expertise.
By highlighting the potential advantages and challenges of integrating AI with XML development tools and languages, the presentation seeks to inspire thoughtful conversation around the future of XML development. We’ll not only delve into the technical aspects of AI-powered XML development but also discuss practical implications and possible future directions.
Digital Marketing Trends in 2024 | Guide for Staying Ahead
https://www.wask.co/ebooks/digital-marketing-trends-in-2024
Feeling lost in the digital marketing whirlwind of 2024? Technology is changing, consumer habits are evolving, and staying ahead of the curve feels like a never-ending pursuit. This e-book is your compass. Dive into actionable insights to handle the complexities of modern marketing. From hyper-personalization to the power of user-generated content, learn how to build long-term relationships with your audience and unlock the secrets to success in the ever-shifting digital landscape.
Nunit vs XUnit vs MSTest Differences Between These Unit Testing Frameworks.pdf
When it comes to unit testing in the .NET ecosystem, developers have a wide range of options available. Among the most popular choices are NUnit, XUnit, and MSTest. These unit testing frameworks provide essential tools and features to help ensure the quality and reliability of code. However, understanding the differences between these frameworks is crucial for selecting the most suitable one for your projects.
Operating System Used by Users in day-to-day life.pptx
Dive into the realm of operating systems (OS) with Pravash Chandra Das, a seasoned Digital Forensic Analyst, as your guide. 🚀 This comprehensive presentation illuminates the core concepts, types, and evolution of OS, essential for understanding modern computing landscapes.
Beginning with the foundational definition, Das clarifies the pivotal role of OS as system software orchestrating hardware resources, software applications, and user interactions. Through succinct descriptions, he delineates the diverse types of OS, from single-user, single-task environments like early MS-DOS iterations, to multi-user, multi-tasking systems exemplified by modern Linux distributions.
Crucial components like the kernel and shell are dissected, highlighting their indispensable functions in resource management and user interface interaction. Das elucidates how the kernel acts as the central nervous system, orchestrating process scheduling, memory allocation, and device management. Meanwhile, the shell serves as the gateway for user commands, bridging the gap between human input and machine execution. 💻
The narrative then shifts to a captivating exploration of prominent desktop OSs, Windows, macOS, and Linux. Windows, with its globally ubiquitous presence and user-friendly interface, emerges as a cornerstone in personal computing history. macOS, lauded for its sleek design and seamless integration with Apple's ecosystem, stands as a beacon of stability and creativity. Linux, an open-source marvel, offers unparalleled flexibility and security, revolutionizing the computing landscape. 🖥️
Moving to the realm of mobile devices, Das unravels the dominance of Android and iOS. Android's open-source ethos fosters a vibrant ecosystem of customization and innovation, while iOS boasts a seamless user experience and robust security infrastructure. Meanwhile, discontinued platforms like Symbian and Palm OS evoke nostalgia for their pioneering roles in the smartphone revolution.
The journey concludes with a reflection on the ever-evolving landscape of OS, underscored by the emergence of real-time operating systems (RTOS) and the persistent quest for innovation and efficiency. As technology continues to shape our world, understanding the foundations and evolution of operating systems remains paramount. Join Pravash Chandra Das on this illuminating journey through the heart of computing. 🌟
Monitoring and Managing Anomaly Detection on OpenShift.pdf
Monitoring and Managing Anomaly Detection on OpenShift
Overview
Dive into the world of anomaly detection on edge devices with our comprehensive hands-on tutorial. This SlideShare presentation will guide you through the entire process, from data collection and model training to edge deployment and real-time monitoring. Perfect for those looking to implement robust anomaly detection systems on resource-constrained IoT/edge devices.
Key Topics Covered
1. Introduction to Anomaly Detection
- Understand the fundamentals of anomaly detection and its importance in identifying unusual behavior or failures in systems.
2. Understanding Edge (IoT)
- Learn about edge computing and IoT, and how they enable real-time data processing and decision-making at the source.
3. What is ArgoCD?
- Discover ArgoCD, a declarative, GitOps continuous delivery tool for Kubernetes, and its role in deploying applications on edge devices.
4. Deployment Using ArgoCD for Edge Devices
- Step-by-step guide on deploying anomaly detection models on edge devices using ArgoCD.
5. Introduction to Apache Kafka and S3
- Explore Apache Kafka for real-time data streaming and Amazon S3 for scalable storage solutions.
6. Viewing Kafka Messages in the Data Lake
- Learn how to view and analyze Kafka messages stored in a data lake for better insights.
7. What is Prometheus?
- Get to know Prometheus, an open-source monitoring and alerting toolkit, and its application in monitoring edge devices.
8. Monitoring Application Metrics with Prometheus
- Detailed instructions on setting up Prometheus to monitor the performance and health of your anomaly detection system.
9. What is Camel K?
- Introduction to Camel K, a lightweight integration framework built on Apache Camel, designed for Kubernetes.
10. Configuring Camel K Integrations for Data Pipelines
- Learn how to configure Camel K for seamless data pipeline integrations in your anomaly detection workflow.
11. What is a Jupyter Notebook?
- Overview of Jupyter Notebooks, an open-source web application for creating and sharing documents with live code, equations, visualizations, and narrative text.
12. Jupyter Notebooks with Code Examples
- Hands-on examples and code snippets in Jupyter Notebooks to help you implement and test anomaly detection models.
Driving Business Innovation: Latest Generative AI Advancements & Success Story
Are you ready to revolutionize how you handle data? Join us for a webinar where we’ll bring you up to speed with the latest advancements in Generative AI technology and discover how leveraging FME with tools from giants like Google Gemini, Amazon, and Microsoft OpenAI can supercharge your workflow efficiency.
During the hour, we’ll take you through:
Guest Speaker Segment with Hannah Barrington: Dive into the world of dynamic real estate marketing with Hannah, the Marketing Manager at Workspace Group. Hear firsthand how their team generates engaging descriptions for thousands of office units by integrating diverse data sources—from PDF floorplans to web pages—using FME transformers, like OpenAIVisionConnector and AnthropicVisionConnector. This use case will show you how GenAI can streamline content creation for marketing across the board.
Ollama Use Case: Learn how Scenario Specialist Dmitri Bagh has utilized Ollama within FME to input data, create custom models, and enhance security protocols. This segment will include demos to illustrate the full capabilities of FME in AI-driven processes.
Custom AI Models: Discover how to leverage FME to build personalized AI models using your data. Whether it’s populating a model with local data for added security or integrating public AI tools, find out how FME facilitates a versatile and secure approach to AI.
We’ll wrap up with a live Q&A session where you can engage with our experts on your specific use cases, and learn more about optimizing your data workflows with AI.
This webinar is ideal for professionals seeking to harness the power of AI within their data management systems while ensuring high levels of customization and security. Whether you're a novice or an expert, gain actionable insights and strategies to elevate your data processes. Join us to see how FME and AI can revolutionize how you work with data!
TrustArc Webinar - 2024 Global Privacy Survey
How does your privacy program stack up against your peers? What challenges are privacy teams tackling and prioritizing in 2024?
In the fifth annual Global Privacy Benchmarks Survey, we asked over 1,800 global privacy professionals and business executives to share their perspectives on the current state of privacy inside and outside of their organizations. This year’s report focused on emerging areas of importance for privacy and compliance professionals, including considerations and implications of Artificial Intelligence (AI) technologies, building brand trust, and different approaches for achieving higher privacy competence scores.
See how organizational priorities and strategic approaches to data security and privacy are evolving around the globe.
This webinar will review:
- The top 10 privacy insights from the fifth annual Global Privacy Benchmarks Survey
- The top challenges for privacy leaders, practitioners, and organizations in 2024
- Key themes to consider in developing and maintaining your privacy program
Fueling AI with Great Data with Airbyte Webinar
This talk will focus on how to collect data from a variety of sources, leveraging this data for RAG and other GenAI use cases, and finally charting your course to productionalization.
GraphRAG for Life Science to increase LLM accuracy
GraphRAG for life science domain, where you retriever information from biomedical knowledge graphs using LLMs to increase the accuracy and performance of generated answers
Recently uploaded (20)
leewayhertz.com-AI in predictive maintenance Use cases technologies benefits ...
leewayhertz.com-AI in predictive maintenance Use cases technologies benefits ...
Salesforce Integration for Bonterra Impact Management (fka Social Solutions A...
Salesforce Integration for Bonterra Impact Management (fka Social Solutions A...
HCL Notes and Domino License Cost Reduction in the World of DLAU
HCL Notes and Domino License Cost Reduction in the World of DLAU
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAU
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAU
Your One-Stop Shop for Python Success: Top 10 US Python Development Providers
Your One-Stop Shop for Python Success: Top 10 US Python Development Providers
Programming Foundation Models with DSPy - Meetup Slides
Programming Foundation Models with DSPy - Meetup Slides
Building Production Ready Search Pipelines with Spark and Milvus
Building Production Ready Search Pipelines with Spark and Milvus
Digital Marketing Trends in 2024 | Guide for Staying Ahead
Digital Marketing Trends in 2024 | Guide for Staying Ahead
Nunit vs XUnit vs MSTest Differences Between These Unit Testing Frameworks.pdf
Nunit vs XUnit vs MSTest Differences Between These Unit Testing Frameworks.pdf
Operating System Used by Users in day-to-day life.pptx
Operating System Used by Users in day-to-day life.pptx
Monitoring and Managing Anomaly Detection on OpenShift.pdf
Monitoring and Managing Anomaly Detection on OpenShift.pdf
Driving Business Innovation: Latest Generative AI Advancements & Success Story
Driving Business Innovation: Latest Generative AI Advancements & Success Story
GraphRAG for Life Science to increase LLM accuracy
GraphRAG for Life Science to increase LLM accuracy
Modern LED luminaire: Biodynamic and IoT Ready
- 1. Configurable Biodynamic Smoothing Modern LED luminaire: Biodynamic and IoT Ready 4000K Evening 2000K Nighttime 4000K Morning Please note that in order to achieve low or no SPD peaks at <500nm, refer to data containing LED’s spectral power distribution charts. CircaLED-IR „IoT Ready“ using Bluetooth 5 stack with MESH networking for Smart City projects -IR Configurable Biodynamic Smoothing CircaLED also contains special features of smart LED power supplies such as programmable dimming, CLO, AOC, reporting and others. Use higher CCT only to prolong daytime after dusk and before dawn. Make nighttime healthier and more pleasant experience with low CCT.