4. let's talk a bit about your makecode
let's talk a bit about your makecode
let's talk a bit about your makecode
program
program
program
1,We start with the basics where there is a series of bullets where we will choose what we want,
for example the bullet that we want to appear or the message that we put and we can put several
options as to start we will put this ..
2.with this we can measure the temperature or do something by shaking
3.here we can put an option to put music
4. Here we can send a message to one of your friends
5. Here we have for example the repetitions
6.here we can do math
5. Firstly we are going to click on
basic and then we are going to
choose forever.
We are going to do an animation of
a heart.
6. Secondly we're going to go to basic
and we're going to choose show
icon. We will put the biggest heart.
7. Thridly we're going to go to
basic and we're going to choose
pause. We will put 500 ms.
8. Now we're going to go to basic
and we're going to choose show
icon. We will put the smallest
heart.
9. Finally we're going to go to basic
and we're going to choose
pause. We will put 500 ms.
10. To be able to reproduce it in the
microbit we press download
To see how it will be
in the microbit we
press play
25. WHAT DOES IT CONSIST OF?
you can connect all cards within a classroom to
the same station, use it to send messages
between them and much more!.
26. STEP ONE Two codes must be created, one for the issuing
card and the other for the receiving card. In
order for the cards to communicate with each
other, they must both be in the same
communication group. For this reason, the
communication group must be established using
the radio block establish group located in the
Radio category.
27. STEP TWO IN THE "INPUT"
OPTION, SELECT
"BY PRESSING
THE A BUTTON".
IN THE "RADIO"
OPTION, SELECT
"RADIO SEND
STRING..." AND
ADD THE
MESSAGE WE
WANT TO SEND.
28. STEP
THREE
Then, in the radio option we
select "on radio received
receivedstring" and add from
the basic option "show string"
and paste "receivedstring"
58. Proyecto STEAM-Robótica
Realizado por alumnado de 3º ESO, 4º ESO y 1º de Bachillerto.
IES Azahar (Sevilla)
Movilidad instituto Alessandro Lombardi de Ariola
Curso 2022/2023