Undoubtedly, washing machines are one of the best home appliances ever created. It has eased the washing process to a great extent. An automatic washing machine does the entire washing process on its own.
Good Stuff Happens in 1:1 Meetings: Why you need them and how to do them well
How to fix the most common problems in washing machines
1. How To Fix The Most Common Problems In
Washing Machines
Undoubtedly, washing machines are one of the best home appliances ever created. It has
eased the washing process to a great extent. An automatic washing machine does the entire
washing process on its own. A semi-automatic one, however, needs help with washing,
rinsing, and spinning at regular intervals. Irrespective of the type of washing machine you
own, you might encounter a few problems every now and then.
We have made a list for you to resolve some common issues on your own.
1. Start and Stop – Improperly fitted power chord is one of the key reasons for this
issue. Check the power chords of the washing machine and plug them well. Also,
make sure the settings you have entered. Lock the doors and verify adequate water
flow from the tap connection. The overloaded machine obstructs the washing process.
The machine may indicate the issue through an error message on the LED Display. If
you own a Samsung washing machine and want a further guide on this, you can
contact Samsung washing machine customer care.
2. Draining of water – Obstruction in drain pipes results in an incomplete rundown.
Lint, sock or a small piece of the garment may have been stuck at the drainage point,
causing the water to be idle inside the machine. You should remove the drainage pipe
and get rid of the water and clean it. You can also perform a tub clean for better
performance.
3. The Machine noise – Many times the smaller garments can fly out of the tub,
producing noise from the machine. Loose buttons from jeans and leftover coin from
pocket may also get loose and make such noises. Always check for free and loose
buttons and don’t forget to empty the pockets before you put clothes to wash in the
machine. If your Whirlpool washing machine still making unwanted sound, you
should contact the whirlpool washing machine service center for further resolution
and complete solution to the issue.
4. Water leakage – Use of the washing machine for a long time causes wear & tear.
Damages to the pipes are very common if the water in your area is harsher, creating
holes in the water drainage pipe. Remove the pipe which has developed holes and
replace it with a new one. If the problem is with the motor, you will have to call a
technician for repair.
5. Non-functional detergent dispenser – Use of detergent powder has a high chance of
blockage at the mouth of the detergent dispenser. Don’t forget to check for the
recommendations for particular detergent usage.
2. 6. Smelly machine -A little bit of water stays in the drainage pipe each time you wash.
This could be due to the inappropriate alignment of the drainage pipe. You must
empty, clean and set it at the right level.
7. Failure in the function/cycle getting selected – A problem may occur with the timer
or the display board and it leads to improper selection of services. To resolve this, you
need to change the display and replace it with a new one. You can get the replacement
from the same brand service center.
Washing Machine - Maintenance Tips
Clean the machine when required
Keep the machine free of lint
Clear any mark and detergent stains
Keep your machine’s manual handy
Regular cleaning and servicing of your washing machine or refrigerator can prolong the
longevity of the machine. You must take care of maintenance, so there is no trouble with
service from your washing machine. If you own a whirlpool washing machine and
refrigerator, you can contact the whirlpool refrigerator service center to resolve any issue.