Threading the upper and lower part of sewing machine

1. THREADING THE
Sewing Machine

2. THREADING THE
UPPER PART OF
Sewing Machine

3. Order of threading in the upper
parts:
1. Spool pin
2. Thread Guide
3. Between metal disc of tension
4. Thread take up lever
5. Thread guide
6. Lower thread guide
7. Threading the needle

4. Step 1: Put the spool of
thread on the spool pin.

5. Step 2: Bring thread to
thread guide.

6. Step 3: Pull the thread
between the metal disc of
the tension.

7. Step 4: Bring the thread up
to the thread take up lever
and raise it as it goes.

8. Step 5: Pull the thread
down to the thread
guide.

9. Step 6: Pull it through
the lower thread guide.

10. Step 7: Thread the
needle.

11. THREADING THE
LOWER PART OF
Sewing Machine

12. Step 1: Remove the bobbin
case pulling on the bobbin
case latch.

13. Step 2: Remove the bobbin
from the case and wind the
thread.

14. Step 3: Put the bobbin back
to the bobbin case and pull
the thread through the little
slot at least 4 inches long.

15. Step 5: Be sure that you
hear the case being locked
upon inserting the bobbin
case inside the shuttle.

16. Step 6: Start the mechanism
by rolling the balance wheel
forward to get the thread of
the bobbin through the needle.

17. Step 1: Pull the upper and
lower thread together by 4
inches.