Air purifier Brochure

1. Tel/Tex: +86-516-8390 3380
E-mail: sales02@freshxf.com

3. FY-YA1000D
FY-GA1600D
'Corona ring' plasma
disinfection module(CRP)
The fourth generation Graphene High voltage
electrostatic dust removal module(G-ESP)
Line type plasma disinfection and electrostatic dust removal module
(LTP)+(ESP)

4. Developed by the FRS-G team of scientists and engineers, FRS-G utilizes an atmospheric plasma
discharge — the same type of discharge found in lightning strikes — to kill and deactivate harmful
airborne microorganisms.
FRS-G plasma coils provide a deadly strike, made up of multiple concurrent inactivation processes, that
work to rapidly destroy airborne pathogens such as viruses, bacteria and fungi.
Microorganisms are exposed directly to the plasma discharge as opposed to by-products of the discharge as
the air flows over the coils.
CRP and LTP Plasma attack the
pathogen, perforating cell walls
DNA and protein within the cell
wall are destroyed
Cell bursts due to osmotic
pressure

5. Plasma is a kind of ionized gas. Due to the existence of ionized free electrons and charged ions, plasma has
high conductivity and strong coupling effect with electromagnetic field. The plasma state is widespread in
the universe and is often regarded as the fourth state of matter (also known as the "super gas state" )..
Plasma contains a large number of active ions, high-energy free groups and other components, and it is
very easy to take chemical reaction with bacteria, mold and spores, virus protein and nucleic acid. Plasma
can destroy microbes and disturb the survival function of microbes, so that it will make all kinds of
microbes die quickly.
After the plasma sterilization experiment, bacteria and virus particles which you will see that all of them
are full of holes through electron microscope images. Because this is a Breakdown etching effect by high
kinetic energy of the electrons and ions. high-speed particles in the plasma to break the microbial
molecular bonds, finally produce non-toxic volatile compounds such as COx, CHx, etc.
For some metal medical instruments which can bear high temperature, the organic matter on metal
instruments can be degraded directly by using strong active plasma.

6. Test Method
Diagnosis of plasma electron density by electromagnetic
interference method
Test results of samples
Plasma density：5.34X1017-2.62X1018 m-3
Conclusion: the plasma produced by the discharge
structure in the plasma generator is a kind of high density
corona discharge plasma.
Plasma density of plasma generator (plasma module) Test Report
Report No.：
Test by the most authoritative Institute of Plasma
Physics, Chinese Academy of Sciences

7. The fourth-generation graphene electrostatic technology is the use of open and closed
electric field technology, multi-pole superposition accelerating electric field technology,
voltage uniformity technology, and halo superposition technology (referred to as second-
generation micro-electric technology) Accumulate particulate matter in the air. When a
large amount of particulate matter passes through the dust collection module, it is
instantly adsorbed on the dust collection module; achieving the goal of high-efficiency
purification of polluted air.
❊Pm2.5 cycle purification efficiency> 99%,
❊The highest one-time purification efficiency> 97% (wind speed 2.5m/s),
❊sterilization rate> 99.9%.
❊High efficiency and long service time: Since the module can be cleaned and used again, the
service life is equivalent to the service life of the module material.
❊Low wind resistance: Energy saving and environmental protection.
❊The filtered air is of high quality: the module filter is firmly adsorbed and does not produce
secondary pollution.
❊Efficient sterilization: The micro-electric dust removal module itself has a high sterilization
function.
❊Safety: The module adopts the polymer graphene electrode polymer as the carrier, and the
structure is finalized through a special process. Thoroughly solve the phenomenon of sparking and
arcing in traditional static electricity.
❊Health care: The module can release a large number of , which have
many health effects on the human body.
❊It is not easy to produce ozone: the use of ultra-low voltage electrostatic field solves the
problem that the micro-electric dust removal is easy to produce ozone during the working process
❊If it is set between the primary filter and the
HEPA filter, the primary purification efficiency is
greater than 97%.
❊The characteristic of electrostatic filtration is that
it has a high adsorption effect on particles smaller
than 0.3 microns, which can extend the service life of
the HEPA filter, and can compensate for the
interception effect of the HEPA filter on the particles
below 0.3 microns, and protect the health of the
human body;
❊The germ-killing effect is as high as 99.9%, which
can ensure that the microbiological indicators are
qualified, can replace ultraviolet lamps and other
types of filters, and can prevent secondary pollution
caused by the failure of high-efficiency filters to be
replaced in time

8. PRODUCT
BRIEF＆TECHNICAL
PARAMETER
FRS-G FY-GA1600D
Product Introduction
Designed for rapid remediation in LARGE spaces and situations with high
risk of infection, FRS-G FY-GA1600D uses LTP and ESP technology
combined with a Penta-stage filter system to provide a combined solution
for air disinfection and particle removal. Strong purification efficiency, quiet
and lasting.
LTP&ESP
PLASMA
FAN SPEED
CONTROL
LARGE
ROOMS
PENTA STAGE
FILTER

9. SPECIFICATIONS
Product Introduction
MODEL
FY-GA1600D - Floor standing, 5-speed fan
setting with1.5-2m power cord
AREA COVERAGE
33.3 – 166.7 m2 (4 air changes per hour)
66.6 – 333.3 m2 (2 air changes per hour)
VOLUME TREATMENT
80 – 400 m3 (4 air changes per hour)
160 – 800 m3 (2 air changes per hour)
ELECTRICAL RATING
Single phase, 220-240 VAC, 50-60 Hz
POWER CONSUMPTION
Maximum 90W
CONSTRUCTION + COLOUR
Precision-cut fabricated metal casing in a
white anti-bacterial powder coat finish.
DIMENSIONS + WEIGHT
143.0 cm (h) x 58.0 cm (w) x 41.0 cm (d)
70.5 kg
ELECTRICAL CONNECTION
Switched with a grounded,
EU type plug.

10. FAN AIRFLOW VOLUME
Speed 1 = 320 m3/h
Speed 2 = 640 m3/h
Speed 3 = 960 m3/h
Speed 4 = 1280 m3/h
Speed 5 = 1600 m3/h
NOISE LEVEL
Speed 1 = 13 dB
Speed 2 = 23 dB
Speed 3 = 34 dB
Speed 4 = 43 dB
Speed 5 = 49 dB
FILTERS
*Stage 1:（Metal）Washable filter 1 -Rear plate
*Stage 2:(Metal）Washable filter 2 -Left plate
*Stage 3:(Metal）Washable filter 2 - Right plate
*Stage 4:Line type plasma disinfection and electrostatic dust removal module (LTP)+(ESP)
*Stage 5:(Paper)Composite filter （Activated carbon+Fine filter）
OPERATING CONDITIONS
10-35°C, 10-75% Relative Humidity
SHIPPING / STORAGE CONDITIONS
5°C-50°C, Maximum 95% Relative Humidity
QUALITY + SAFETY
Manufactured under ISO 9001, ISO 14001 & OHSAS 18001.
Conforms to LVD 2014/35/EU and the EMC 2014/30/EU
CE-LVD
EN60335-1
EN60335-2-65
Standard for Ozone detection
EN62233:2008
CE-EMC
EN55014-1
EN55014-2
EN IEC 61000-3-2
EN IEC 61000-3-3

11. Luxury hotel
Hospital
Children's clinic
Meeting room
Sickroom
Therapy room

13. Fuctions of Control Panel
FY-GA1600D Cabinet Type Air Disinfection Machine
*7 inches LCD touch display screen
*Adopts detection components from the century-old US supplier-
Honeywell
* High sensitivity PM2.5 particle sensor, real-time monitoring of air quality
*Auto mode-Air Quality Indicator in 5 color lights
*Manual mode:5 speeds control
*Sleep/silent mode
*ECO mode:After working for two hours, machine will pause for half an
hour
*AQG – Air Quality Grade Display with 5 Grade
*Real-time Temperature and Humidity Display
*Parental Controls– Child Lock
*Ultra-long distance far infrared remote control
*Filter changing/Plasma cleaning reminder
Product Introduction

16. Product Certificates
CE-LVD CE-EMC
FY-GA1600D

17. Identification test for air disinfection effect (Field test)
Natural airborne bacteria＞90.0% , Min 98.04%~Max
98.96%
Identification test for air disinfection effect (Simulated
field test)
Bactericidal rate of Staphylococcus albus ＞99.9% , Min
99.99%~Max 99.99%
Air microbial pollution inspection Instrument
Residual Bacterial colony(cfu/plate) :0.1 (Sampling time was
15 min after disinfection,)
European Ozone Leakage standard(EN62233:2008)
is less 5 ppb.
Sterilization and disinfection test report
Report No.：
Test by the most authoritative biological research
laboratory under the Chinese Academy of
Sciences

19. ①FRS-G Plasma air sterilizer can remove aerosols.
②The maximum bacteria killing rate can be 99.99%.
③The air quality can be improved within 10 minutes.
④Noise is 20% lower than that of similar products.
⑤ 100,000 hours of long working life.