SENIOR PROJECT JOE FINAL REV PRESENTATION (5-7-15) (2)
1. MECH-481 & MECH-481L
Senior Project - Spring 2015
Group #3 – C.M.M.
Presented by:
Ali Bahremand, Joseph Decasse, Ella Krapova, Kyle MacGillivray, Jonathan Mendez
2. Coordinate Measuring Machines
• Device for measuring the
geometrical
characteristics of an
object
• CMM Programs are
utilized to repeatedly
measure parts
3. CHALLENGE:
• Master a very technical machine to create an
instructional guide for students
8. • Importance of Probe Calibration
• The Masterball
• The Calibration Process
Calibration
PH10T Probe head
TP20 Touch Probe
Standard Force Module
4x20 Stylus
9. Alignment
4
4
4
Top
Hole 1
Hole 2
Touch Points
Alignment ProcessAlignment Concept
• Basis of every part program on the CMM’s
• Tells the machine where the part is located
• Capable of creating simple or advanced Alignments
11. Creating CMM Programs
• Operator manually creates program of
critical features
• Automated measurement of batched parts
• Generates measurements into a
document
14. Work Instructions
• Calibrate probe
• Part alignment- Based on “Plane-Line-Line”
• Uploading existing program
• User friendly
15. CAT1000PS Programming
• Utilizes CAD model to measure the part
• Sets up coordinate system that is
matched with our model/print.
• Select critical features to be measured
• Measure all features of the part quickly
