The document describes the process of designing and building a lift system for powersports vehicles. It shows drawings and photos of each step, from initial designs in AutoCAD to laying out the base, assembling the frame, adding wheels and jacks, and finishing with a test run lifting a four-wheeler. The final sentences note the importance of patience throughout the project.

4. Powersports Technician

6. Plans that I drew up on paper

7. Designing my lift on AutoCAD

8. Finished design of my lift

9. Another view of the design

10. Laid out the base of the lift

11. Screwing together the base of the lift

12. Upper frame screwed together

13. Screwing down the plywood

14. Positioning the center lift

15. The finished middle jack

16. “Door” for center jack

17. Caster Wheels

18. The front lift system

19. The lift, lifted off the ground

20. The ramp system

21. The corner braces

22. Fold-out step

23. The finished lift

24. Lift with my four-wheeler on it

25. Lift system at work

26. Changing the oil

28. Patience
Patience & Powersports