This document provides technical specifications for several hydraulic high speed beveling machines produced by PROTEM, including the US80/150HSB-R-HYD for 6-14" pipes, US220HSB-R-HYD for 12-22" pipes, US420HSB-R-HYD for 22-30" pipes, and US620HSB-R-HYD for 30-38" pipes. Each machine can bevel, face, and counterbore pipes individually or simultaneously. The document lists key dimensions and specifications for each model.

1. PROTEM SAS
ZI les Bosses
F-26800 Etoile sur Rhone
Tel.: 0033 (0) 47557-4141
Fax: 0033 (0) 47557-4149
www.protem.fr
PROTEM GmbH
Am Hambiegel 27
D-76706 Dettenheim
Tel.: 0049 (0) 7247 9393-0
Fax: 0049 (0) 7247 9393-33
www.protem-gmbh.de
ISO 9001 Seite / Page 70/109
.
Subject to modification without prior notice. Its content is confidential, this document is unique and is PROTEM property, it shall not be corrected, duplicated or modified with-
out the written agreement of PROTEM. The content refers exclusively to the sales and delivery conditions of the seller.
4.2 High Speed Beveller US80/150HSB-R-HYD (6-14”)
x The hydraulic high speed beveller PROTEM US80/150HSB-R-HYD machine can be used either on-
site or in a workshop.
x The machine is transportable, easy to install and will be clamped into the inside diameter of the pipe.
x The US80/150HSB-R-HYD is used for bevelling, facing and counterboring works. These works can be
processed individually or simultaneously.
x It will perform repeatable high quality bevel with a I, V, J, X shape or compounded bevels perfectly
suitable for the orbital or manual welding process.
x It can be operated for the main pipe materials such as carbon steel, stainless steel, and all exotic al-
loys such as INCOLOY, HASTELLOY, INCOLOY DUPLEX; SUPER DUPLEX etc.

2. PROTEM SAS
ZI les Bosses
F-26800 Etoile sur Rhone
Tel.: 0033 (0) 47557-4141
Fax: 0033 (0) 47557-4149
www.protem.fr
PROTEM GmbH
Am Hambiegel 27
D-76706 Dettenheim
Tel.: 0049 (0) 7247 9393-0
Fax: 0049 (0) 7247 9393-33
www.protem-gmbh.de
ISO 9001 Seite / Page 71/109
.
Subject to modification without prior notice. Its content is confidential, this document is unique and is PROTEM property, it shall not be corrected, duplicated or modified with-
out the written agreement of PROTEM. The content refers exclusively to the sales and delivery conditions of the seller.
Special features :
The US80/150HSB-R-HYD can be equipped with two different clamping mandrels. Within a short time
through the replacement either of the mandrel US150 or the replacement of the mandrel US80, the range of
diameters can be reduced or increased according to the version of the expansion mandrel.
Technical description US80HSB-R-HYD:
Length with mandrel in back position: 1150 mm
Length with mandrel in forward position / 1200 mm
Height: 871 mm
Height from ground to tool plate axis: 424 mm
Width: 800 mm
Weight appr..: > 450 kg

3. PROTEM SAS
ZI les Bosses
F-26800 Etoile sur Rhone
Tel.: 0033 (0) 47557-4141
Fax: 0033 (0) 47557-4149
www.protem.fr
PROTEM GmbH
Am Hambiegel 27
D-76706 Dettenheim
Tel.: 0049 (0) 7247 9393-0
Fax: 0049 (0) 7247 9393-33
www.protem-gmbh.de
ISO 9001 Seite / Page 72/109
.
Subject to modification without prior notice. Its content is confidential, this document is unique and is PROTEM property, it shall not be corrected, duplicated or modified with-
out the written agreement of PROTEM. The content refers exclusively to the sales and delivery conditions of the seller.
Technical description US150HSB-R-HYD:
Length with mandrel in back position: 1310 mm
Length with mandrel in forward position: 1360 mm
Height: 871 mm
Height from ground to tool plate axis: 424 mm
Width: 800 mm
Weight appr.: > 500 kg
Technical features:
Tool-plate feed stroke: 50 mm
Mandrel expansion stroke: 21 mm OD
Minimum Maximum
Tool-plate rotation speed: 20 rpm 150 rpm
Tool-plate feed speed: 0.05 mm 0.3 mm rpm
Mandrel supply pressure: 75 bar 150 bar
Tool-plate rotation supply pressure: 65 bar 130 bar
Tool-plate feed supply pressure: 45 bar 120 bar
Possible pipe range: 6’’ pipe/Ø OD 168 mm 14’’ pipe/ Ø OD 356 mm
Wall thickness on X42 bevel 30°: 0.375’’/10 mm 1.180’’/30 mm

4. PROTEM SAS
ZI les Bosses
F-26800 Etoile sur Rhone
Tel.: 0033 (0) 47557-4141
Fax: 0033 (0) 47557-4149
www.protem.fr
PROTEM GmbH
Am Hambiegel 27
D-76706 Dettenheim
Tel.: 0049 (0) 7247 9393-0
Fax: 0049 (0) 7247 9393-33
www.protem-gmbh.de
ISO 9001 Seite / Page 73/109
.
Subject to modification without prior notice. Its content is confidential, this document is unique and is PROTEM property, it shall not be corrected, duplicated or modified with-
out the written agreement of PROTEM. The content refers exclusively to the sales and delivery conditions of the seller.
Expansion mandrel US80: Expansion mandrel US150:
Inside clamping range: 129 mm - 272 mm 184 mm - 345 mm
Outside clamping range:
6’’ pipe /Ø OD 168 mm –
10’’ pipe/ Ø OD 273 mm
10’’ pipe /Ø OD 273 mm –
14’’ pipe/ Ø OD 356 mm
Wallthickness X42
bevel 30°:
0.375’’/10 mm - 1.000’’/25 mm 0.375’’/10 mm - 1.180’’/30 mm
Components of the clamping
mandrel:
Information:
The main frame of the US80/150HSB-R-HYD can be equipped with two different clamping mandrels. One
can order first the version US80HSB-R-HYD with the US80 clamping mandrel mounted on the main frame of
the machine or the US150HSB-R-HYD with the US150 mandrel mounted on the main frame of the machine
and order the additional mandrel to cover a larger range of diameters later on. The mandrel will then be de-
livered in a separate wooden crate.

5. PROTEM SAS
ZI les Bosses
F-26800 Etoile sur Rhone
Tel.: 0033 (0) 47557-4141
Fax: 0033 (0) 47557-4149
www.protem.fr
PROTEM GmbH
Am Hambiegel 27
D-76706 Dettenheim
Tel.: 0049 (0) 7247 9393-0
Fax: 0049 (0) 7247 9393-33
www.protem-gmbh.de
ISO 9001 Seite / Page 74/109
.
Subject to modification without prior notice. Its content is confidential, this document is unique and is PROTEM property, it shall not be corrected, duplicated or modified with-
out the written agreement of PROTEM. The content refers exclusively to the sales and delivery conditions of the seller.
4.3 High Speed Beveller US220HSB-R-HYD (12-22”)
x The hydraulic high speed beveller PROTEM US220HSB-R-HYD machine can be used either on-site
or in a workshop.
x The machine is transportable, easy to install and will be clamped into the inside diameter of the pipe.
x The US220HSB-R-HYD is used for bevelling, facing and counterboring works. These works can be
processed individually or simultaneously.
x It will perform repeatable high quality bevel with a I, V, J, X shape or compounded bevels perfectly
suitable for the orbital or manual welding process.
x It can be operated for the main pipe materials such as carbon steel, stainless steel, and all exotic al-
loys such as INCOLOY, HASTELLOY, INCOLOY DUPLEX; SUPER DUPLEX etc.
Technical Description US220HSB-R-HYD:
Length with mandrel in back position: 2030 mm
Length with mandrel in forward position: 2110 mm
Height: 1410 mm
Height from ground to tool plate axi: 640 mm
Width: 1250 mm
Weight appr.: > 1150 kg

6. PROTEM SAS
ZI les Bosses
F-26800 Etoile sur Rhone
Tel.: 0033 (0) 47557-4141
Fax: 0033 (0) 47557-4149
www.protem.fr
PROTEM GmbH
Am Hambiegel 27
D-76706 Dettenheim
Tel.: 0049 (0) 7247 9393-0
Fax: 0049 (0) 7247 9393-33
www.protem-gmbh.de
ISO 9001 Seite / Page 75/109
.
Subject to modification without prior notice. Its content is confidential, this document is unique and is PROTEM property, it shall not be corrected, duplicated or modified with-
out the written agreement of PROTEM. The content refers exclusively to the sales and delivery conditions of the seller.
Technical features US220HSB-R-HYD:
Tool-plate feed strok: 80 mm
Mandrel expansion stroke: 44,1 mm
( related to the diameter)
Minimum Maximum
Tool-plate rotation speed: 22 rpm 100 rpm
Tool-plate feed speed: 0.05 mm 0.3 mm rpm
Mandrel supply pressure: 75 bar 150 bar
Tool-plate rotation supply pressure: 65 bar 130 bar
Tool-plate feed supply pressure: 45 bar 120 bar:
Possible pipe range: 12’’ pipe/Ø OD 324 mm 22’’ pipe/ Ø OD 558 mm
Wall thickness on X42 bevel 30 : 0.375’’/10 mm 1.180’’/30 mm

7. PROTEM SAS
ZI les Bosses
F-26800 Etoile sur Rhone
Tel.: 0033 (0) 47557-4141
Fax: 0033 (0) 47557-4149
www.protem.fr
PROTEM GmbH
Am Hambiegel 27
D-76706 Dettenheim
Tel.: 0049 (0) 7247 9393-0
Fax: 0049 (0) 7247 9393-33
www.protem-gmbh.de
ISO 9001 Seite / Page 76/109
.
Subject to modification without prior notice. Its content is confidential, this document is unique and is PROTEM property, it shall not be corrected, duplicated or modified with-
out the written agreement of PROTEM. The content refers exclusively to the sales and delivery conditions of the seller.
4.4 High Speed Beveller US420HSB-R-HYD (22-30”)
x The hydraulic high speed beveller PROTEM US420HSB-R-HYD machine can be used either on-site
or in a workshop.
x The machine is transportable, easy to install and will be clamped into the inside diameter of the pipe.
x The US420HSB-R-HYD is used for bevelling, facing and counterboring works. These works can be
processed individually or simultaneously.
x It will perform repeatable high quality bevel with a I, V, J, X shape or compounded bevels perfectly
suitable for the orbital or manual welding process.
x It can be operated for the main pipe materials such as carbon steel, stainless steel, and all exotic al-
loys such as INCOLOY, HASTELLOY, INCOLOY DUPLEX; SUPER DUPLEX etc.
Technical description US420HSB-R-HYD:
Length with mandrel in back position:
2672 mm
Length with mandrel in forward position: 2755 mm
Height: 1796 mm
Height from ground to tool plate axis: 830 mm
Width: 1360 mm
Weight appr.: > 3000 kg

8. PROTEM SAS
ZI les Bosses
F-26800 Etoile sur Rhone
Tel.: 0033 (0) 47557-4141
Fax: 0033 (0) 47557-4149
www.protem.fr
PROTEM GmbH
Am Hambiegel 27
D-76706 Dettenheim
Tel.: 0049 (0) 7247 9393-0
Fax: 0049 (0) 7247 9393-33
www.protem-gmbh.de
ISO 9001 Seite / Page 77/109
.
Subject to modification without prior notice. Its content is confidential, this document is unique and is PROTEM property, it shall not be corrected, duplicated or modified with-
out the written agreement of PROTEM. The content refers exclusively to the sales and delivery conditions of the seller.
Technical features US420HSB-R-HYD:
Tool-plate feed stroke: 80 mm
Mandrel expansion stroke:
48,8 mm
(je nach Durchmesser / related to the diameter)
Minimum Maximum
Tool-plate rotation speed: 12 rpm 55 rpm
Tool-plate feed speed: 0.05 mm 0.3 mm rpm
Mandrel supply pressure: 60 bar 120 bar
Tool-plate rotation supply pressure: 60 bar 120 bar
Tool-plate feed supply pressure: 55 bar 110 bar
Possible pipe range: 22’’ pipe/Ø OD 558 mm 30’’ pipe/ Ø OD 762 mm
Wall thickness on X42 bevel 30°: 0.375’’/10 mm 1.250’’/32 mm

9. PROTEM SAS
ZI les Bosses
F-26800 Etoile sur Rhone
Tel.: 0033 (0) 47557-4141
Fax: 0033 (0) 47557-4149
www.protem.fr
PROTEM GmbH
Am Hambiegel 27
D-76706 Dettenheim
Tel.: 0049 (0) 7247 9393-0
Fax: 0049 (0) 7247 9393-33
www.protem-gmbh.de
ISO 9001 Seite / Page 78/109
.
Subject to modification without prior notice. Its content is confidential, this document is unique and is PROTEM property, it shall not be corrected, duplicated or modified with-
out the written agreement of PROTEM. The content refers exclusively to the sales and delivery conditions of the seller.
4.5 High Speed Beveller US620HSB-R-HYD (30-38”)
x The hydraulic high speed beveller PROTEM US620HSB-R-HYD machine can be used either on-site
or in a workshop.
x The machine is transportable, easy to install and will be clamped into the inside diameter of the pipe.
x The US620HSB-R-HYD is used for bevelling, facing and counterboring works. These works can be
processed individually or simultaneously.
x It will perform repeatable high quality bevel with a I, V, J, X shape or compounded bevels perfectly
suitable for the orbital or manual welding process.
x It can be operated for the main pipe materials such as carbon steel, stainless steel, and all exotic al-
loys such as INCOLOY, HASTELLOY, INCOLOY DUPLEX; SUPER DUPLEX etc.

10. PROTEM SAS
ZI les Bosses
F-26800 Etoile sur Rhone
Tel.: 0033 (0) 47557-4141
Fax: 0033 (0) 47557-4149
www.protem.fr
PROTEM GmbH
Am Hambiegel 27
D-76706 Dettenheim
Tel.: 0049 (0) 7247 9393-0
Fax: 0049 (0) 7247 9393-33
www.protem-gmbh.de
ISO 9001 Seite / Page 79/109
.
Subject to modification without prior notice. Its content is confidential, this document is unique and is PROTEM property, it shall not be corrected, duplicated or modified with-
out the written agreement of PROTEM. The content refers exclusively to the sales and delivery conditions of the seller.
Technical description US620HSB-R-HYD:
Length with mandrel in back position: 3074 mm
Length with mandrel in forward position: 4027 mm
Height: 1544 mm
Height from ground to tool plate axis: 755 mm
Width: 1320 mm
Weight appr.: > 2700 kg
Information:
Weight depends on the accessories and options mounted on the machine.

11. PROTEM SAS
ZI les Bosses
F-26800 Etoile sur Rhone
Tel.: 0033 (0) 47557-4141
Fax: 0033 (0) 47557-4149
www.protem.fr
PROTEM GmbH
Am Hambiegel 27
D-76706 Dettenheim
Tel.: 0049 (0) 7247 9393-0
Fax: 0049 (0) 7247 9393-33
www.protem-gmbh.de
ISO 9001 Seite / Page 80/109
.
Subject to modification without prior notice. Its content is confidential, this document is unique and is PROTEM property, it shall not be corrected, duplicated or modified with-
out the written agreement of PROTEM. The content refers exclusively to the sales and delivery conditions of the seller.
Technical features US620HSB-R-HYD:
Tool-plate feed stroke: 150 mm
Mandrel expansion stroke: 48,8 mm
( related to the diameter)
Minimum Maximum
Tool-plate rotation speed: 12 rpm 50 rpm
Tool-plate feed speed: 0.05 mm 0.3 mm rpm
Mandrel supply pressure: 75 bar 150 bar
Tool-plate rotation supply pressure: 65 bar 130 bar
Tool-plate feed supply pressure: 55 bar 110 bar
Possible pipe range:
30’’ pipe/Ø OD 762 mm 38’’ pipe/ Ø OD 965 mm
Wall thickness on X42 bevel 30°: 0.375’’/10 mm 1.375’’/35 mm

12. PROTEM SAS
ZI les Bosses
F-26800 Etoile sur Rhone
Tel.: 0033 (0) 47557-4141
Fax: 0033 (0) 47557-4149
www.protem.fr
PROTEM GmbH
Am Hambiegel 27
D-76706 Dettenheim
Tel.: 0049 (0) 7247 9393-0
Fax: 0049 (0) 7247 9393-33
www.protem-gmbh.de
ISO 9001 Seite / Page 81/109
.
Subject to modification without prior notice. Its content is confidential, this document is unique and is PROTEM property, it shall not be corrected, duplicated or modified with-
out the written agreement of PROTEM. The content refers exclusively to the sales and delivery conditions of the seller.
4.6 High Speed Beveller US820HSB-R-HYD (38-48”)
x The hydraulic high speed beveller PROTEM US820HSB-R-HYD machine can be used either on-site
or in a workshop.
x The machine is transportable, easy to install and will be clamped into the inside diameter of the pipe.
x The US820HSB-R-HYD is used for bevelling, facing and counterboring works. These works can be
processed individually or simultaneously.
x It will perform repeatable high quality bevel with a I, V, J, X shape or compounded bevels perfectly
suitable for the orbital or manual welding process.
x It can be operated for the main pipe materials such as carbon steel, stainless steel, and all exotic al-
loys such as INCOLOY, HASTELLOY, INCOLOY DUPLEX; SUPER DUPLEX etc.
Technical description US820HSB-R-HYD:
Length with mandrel in back position: 3877 mm
Length with mandrel in forward position: 4027 mm
Height: 2020 mm
Height from ground to tool plate axis: 1050 mm
Width: 1800 mm
Weight appr..: > 3000 kg

13. PROTEM SAS
ZI les Bosses
F-26800 Etoile sur Rhone
Tel.: 0033 (0) 47557-4141
Fax: 0033 (0) 47557-4149
www.protem.fr
PROTEM GmbH
Am Hambiegel 27
D-76706 Dettenheim
Tel.: 0049 (0) 7247 9393-0
Fax: 0049 (0) 7247 9393-33
www.protem-gmbh.de
ISO 9001 Seite / Page 82/109
.
Subject to modification without prior notice. Its content is confidential, this document is unique and is PROTEM property, it shall not be corrected, duplicated or modified with-
out the written agreement of PROTEM. The content refers exclusively to the sales and delivery conditions of the seller.
Technical features US820HSB-R-HYD:
Tool-plate feed stroke: 150 mm
Mandrel expansion stroke: 48,8 mm
(je nach Durchmesser / related to the diameter)
Minimum Maximum
Tool-plate rotation speed: 10 rpm 42 rpm
Tool-plate feed speed: 0.05 mm rpm 0.3 mm rpm
Mandrel supply pressure: 75 bar 150 bar
Tool-plate rotation supply pressure: 65 bar 130 bar
Tool-plate feed supply pressure : 55 bar 110 bar
Possible pipe range: 38’’ pipe/Ø OD 965 mm 48’’ pipe/ Ø OD 1220 mm
Wandstärke X42 mit 30°-Fase / Wall thickness on X42 bevel 30°: 0.375’’/10 mm 1.5’’/38 mm
Other models:
US1020HSB-R-HYD
US1220HSB-R-HYD
US1420HSB-R-HYD

14. PROTEM SAS
ZI les Bosses
F-26800 Etoile sur Rhone
Tel.: 0033 (0) 47557-4141
Fax: 0033 (0) 47557-4149
www.protem.fr
PROTEM GmbH
Am Hambiegel 27
D-76706 Dettenheim
Tel.: 0049 (0) 7247 9393-0
Fax: 0049 (0) 7247 9393-33
www.protem-gmbh.de
ISO 9001 Seite / Page 83/109
.
Subject to modification without prior notice. Its content is confidential, this document is unique and is PROTEM property, it shall not be corrected, duplicated or modified with-
out the written agreement of PROTEM. The content refers exclusively to the sales and delivery conditions of the seller.
Information:
The maximum wall thickness which can be machined with the US220HSB-R-HYD depends directly from the
application such as the angle of the bevel, the configuration of the bevel, the material, the type of carbide
insert used etc. These machining parameters selected will enable to determine which wall thickness can be
machined. For wall thickness < 10 mm it may be necessary to use enveloping pods and to adjust the supply
pressure of the mandrel. For wall thickness > 32 mm it may be necessary to add a third hydraulic drive to
increase the machining torque or to use specific carbide inserts.
If the wall thicknesses of the pipes which are to be machined enter the above mentioned cases, please con-
sult PROTEM. We may draw your attention to the fact that you will be requested to provide us with pipe
samples, especially if the features of your pipes are different from the ones mentioned in the description here
above. The technical features might be different according to the hydraulic drives, the cylinder size for clamp-
ing and the feed system.