BPH Attachments Edition 1a

rs, shears, sorting grabs, diggin
pactor plates, tilt rotators, crus
ails, magnets, hammers, pulver
s, digging grabs, augers, mult
tilt rotators, crusher buckets, sc
mers, pulverisers, crushers, she
augers, multi-processors, com
hire sales
repairs parts

BPH, Gillmans Industrial Estate, Natts Lane, Billingshurst, West Sussex, RH14 9EZ, UK 1sales@bph-uk.com 0845 017 6972
WHAT TO EXPECT CONTENTS
With over 40 years’ experience in the hydraulic attachments industry, there’s not much that we
don’t know or can’t do!
Our customers expect, and receive, the best. As a result, we have built up many long-standing
and trusted relationships. We can be relied upon to supply the right product, at the right time
and at the right price. Sounds simple, but actually to achieve this we have made our business
very different from that of our competitors.
Perhaps the biggest difference is the speed of our response. We hold a huge stock because we
know that the simple adage that ‘time is money’ is very important. Our customers can’t afford
to be kept waiting. How many other companies can offer immediate availability of almost any
attachment?
And then there’s our manufacturing capability. Quite often our customers may need to mount
our attachments to different excavator brands. At BPH we don’t know the meaning of the word
‘incompatible’! Using our own workshops we can specially engineer the mounting bracket
required - and all within a few hours of your order.
Yet whether using our tailor-made service for specially engineered mounting brackets or
purchasing or renting the renowned ProDem attachments or other market-leading products,
our prices always remain highly competitive. We are, in fact, the sole importer of ProDem.
This product is recognised for its quality and low cost of ownership and we provide our
customers with full support on a national basis.
If customers want to rent, rather than buy, we have one of the largest rental fleets in the UK.
Once again, this means parts are readily available but we also give our customers another
benefit. There is no minimum hire period on many of our attachments. Delivering and installing
our rental fleet throughout the UK we really do everything we can to support our customers’
businesses.
Any business is, of course, only as good as its people, and our staff are second to none. And
ultimately, it’s all about teamwork. We work as a team with our customers to ensure that
they can get the job done in a way that meets all their objectives. From our field engineers,
who ensure that our products are achieving their maximum performance, to our office and
workshop staff, who get the right products delivered at the right price and at the right time...
...OUR COMMITMENT TO OUR CUSTOMERS IS UNWAVERING.
FROM US
Hydraulic Hammers 2-3
Backhoe Hydraulic Hammers 4-5
Skidsteer Hydraulic Hammers 4-5
Selector Grabs 6-7
Multi Processors 8-9
Static Pulverisers 10-11
Rotating Pulverisers 12-13
Mini Crushers 14-15
Mini Shears 16-17
Excavator Compactors 18-19
Digging Clamshells 20-21
Orange Peel Grabs 22-23
Rehandling Clamshell Buckets 24-25
Timber Grabs 26-27
Hydraulic Magnets 28-29
Excavator Augers 0.75 - 5T 30-31
Excavator Augers 5 - 50T 32-33
Skidsteer Augers 34-35
Auger Accessories 36-37
Skidsteer Trenchers 38-39
Piling Hammers 40-41
Excavator Flails & Mulchers 42-45
Skidsteer Flails & Mulchers 46-47
Excavator Pallet Forks 48-49
Post Drivers 48-49
Parts, Service & Repairs 50

2 3BPH, Gillmans Industrial Estate, Natts Lane, Billingshurst, West Sussex, RH14 9EZ, UK sales@bph-uk.com 0845 017 6972
A ROCK CLAW
all models
B SINGLE GREASE POINT - ALL MODELS
optional auto lube greasing kit available
(PRB130 Upwards)
C LIFTING EYE
all models
D SWIVEL HOSE JOINTS (PRB130 UPWARDS)
E PRO SPEED DUAL SPEED VALVE
(PRB130 UPWARDS)
to suit individual applications
F TOOL
point chisel or blunt
G REINFORCED SWIVEL PROTECTION
(PRB130 UPWARDS)
H REINFORCED LOWER CASING
I EASY ACCESS SERVICE PANELS
(PRB130 UPWARDS)
HYDRAULIC
PRB008
PRB010
PRB030
PRB040
PRB050
PRB060
PRB100
Work Weight (kg) 75 123 149 209 294 424 537
Required Oil Flow (lpm) 12-22 15-25 20-35 30-50 35-65 45-90 60-110
Operating Pressure (bar) 100-130 100-130 100-130 110-140 130-170 130-170 140-180
Impact Energy (max) – High Speed (joule) 110 180 300 450 700 1000 1350
Impact Frequency – High Speed (bpm) 750-1300 700-1200 550-1000 550-1000 550-1000 520-1000 500-1000
Tool Diameter (mm) Ø42 Ø45 Ø50 Ø58 Ø68 Ø80 Ø93
Tool Diameter (inch) Ø1.65 Ø1.80 Ø2.0 Ø2.3 Ø2.7 Ø3.2 Ø3.7
Carrier Weight (tonne) 0.7-1.5 0.7-3 1.5-4.5 2.5-6 3.5-8 5-11 7-15
NOTES
– The PRB Series (PRB130 upwards) beneﬁt from, “Pro-Speed” Dual Speed Control System, Anti-Blank Firing System,
Auto-Stop & Auto Start, Rock Claws, and a single high pressure accumulator (PRB200 upwards).
The ProDem PRB Series are Vibration Dampened Silenced Hydraulic Hammers which have been developed
for the toughest kinds of environments.
Model Shown - PRB100 & PRB700
DB C H FA E G I
PRB130
PRB170
PRB200
PRB250
PRB300
PRB400
PRB500
PRB700
Work Weight (kg) 974 1270 1564 1662 2492 3100 4200 6700
Required Oil Flow (lpm) 80-140 110-170 100-150 130-180 170-240 200-280 230-330 320-420
Operating Pressure (bar) 140-180 160-180 160-180 160-180 165-185 165-185 165-185 165-185
Impact Energy (max) – Low Speed (joule) 2500 2800 3500 4300 6100 7600 10400 13000
Impact Energy (max) – High Speed (joule) 2150 2200 2800 3200 4200 6000 7900 10000
Impact Frequency – Low Speed (bpm) 380-700 350-600 340-550 330-500 310-490 330-450 250-370 280-370
Impact Frequency – High Speed (bpm) 550-850 550-750 440-700 430-650 400-680 420-600 350-500 370-480
Tool Diameter (mm) Ø105 Ø117 Ø125 Ø135 Ø150 Ø165 Ø180 Ø205
Tool Diameter (inch) Ø4.1 Ø4.6 Ø4.9 Ø5.3 Ø5.9 Ø6.5 Ø7.1 Ø8.07
Carrier Weight (tonne) 12-20 14-24 16-25 20-30 26-30 32-45 40-70 60-110
HAMMERS

PRB050-NL
PRB040-SL
PRB010
PRB060-NL
PRB050-SL
PRB030
PRB100-NL
PRB060-SL
Work Weight (kg) 274 401 485
Required Oil Flow (lpm) 35-65 45-90 60-110
Operating Pressure (bar) 130-170 130-170 140-180
Blow Frequency (bpm) 550-1000 520-1000 500-1000
Impact Energy (joule) 700 1000 1400
Tool Shank Diameter (mm) Ø68 Ø80 Ø93
Carrier Weight (tonne) 3.5-8.0 5.0-11.0 7.0-15.0
Work Weight (kg) 123 149 290 274 401
Required Oil Flow (lpm) 15 -25 20-35 50-70 35-65 45-90
Operating Pressure (bar) 100-130 100-130 110-140 130-170 130-170
Blow Frequency (bpm) 700-1200 550-1000 550-1000 550-1000 520-1000
Impact Energy (joule) 180 300 450 700 1000
Tool Shank Diameter (mm) Ø45 Ø50 Ø58 Ø68 Ø80
Carrier Weight (tonne) 0.7-1.5 1.5-4.5 2.5-6.0 3.5-8.0 5.0-11.0
A PICKS UP ON A QUICK HITCH
OR DIRECT MOUNT
B FOLD AWAY DESIGN
to suit backhoe loader
C NARROW SIDE PLATES
to enable better operation in utility applications
BACKHOE
SKIDSTEER
A STANDARD PRB040 WITH HITCH TO
SUIT A SKIDSTEER
B EASY ACCESS TO MOUNTING PLATE
BOLTS
C HOSE CONNECTION BLOCK IS
PROTECTED BUT EASILY ACCESSIBLE
The ProDem NL Series are designed for use with backhoe loaders and have been developed for the toughest
kinds of environments.
The ProDem SL Series are vibration dampened silenced hydraulic hammers which have been developed for
the toughest kinds of environments.
A B C
Model Shown - PRB040-SL
A B C
Model Shown - PRB060-NL
HYDRAULIC HAMMERS
HYDRAULIC HAMMERS

SELECTOR
GRABS
A B C D F GE H
A UNIQUE FRAME DESIGN
giving maximum protection, strength and durability
B CONTINUOUS 360° HYDRAULIC ROTATION
twin rotation motors ensure powerful
and accurate operation
(twin motors PSG600-D upwards)
C ROTATE MOTOR PROTECTION VALVES
D SAFETY CHECK VALVE
to retain the grab force
E HIGH CLOSING FORCES: RAMS WITH
OVERSTROKE DAMPENING
F WIDE OPENING
for large capacity
G WEAR RESISTANT QUALITY MATERIALS
used for maximum durability and minimum
downtime
H BOLT ON REPLACEABLE CUTTING EDGES
for easy and cost saving maintenance
PSG
75-D
PSG
1002-D
PSG
150-D
PSG
1100-D
PSG
200-D
PSG
1202-D
PSG
400-D
PSG
1402-D
PSG
450-D
PSG
1900-D
PSG
500-D
PSG
2500-D
PSG
600-D
PSG
2700-D
PSG
800-D
PSG
3000-D
PSG
900-D
PSG
5000-D
PSG
1000-D
PSG
13000-D
Working Weight (kg) 75 140 240 350 400 600 840 1000 1050 1100
Pressure - Open/Close (bar) 300 300 300 300 300 350 350 350 350 350
Oil Flow - Open/Close (lpm) 15 25 35 40 50 90 100 120 120 120
Min Pressure - Rotation (bar) 150 150 150 150 150 190 190 190 190 190
Max Pressure - Rotation (bar) 170 170 170 170 170 210 210 210 210 210
Oil Flow - Rotation - l/min (mm) 5 10 10 12 12 15 25 25 25 25
Width (mm) 300 450 500 600 700 600 800 800 900 1000
Max Opening (mm) 600 750 1160 1400 1500 1800 1800 1950 1950 1950
Height (mm) 600 700 850 950 1000 1150 1200 1300 1300 1300
Capacity (l) 30 70 100 150 200 300 400 500 600 700
Closing Force (kN) 6 15 20 23 24 30 35 46 46 46
Excavator Range (t) 0.7-1.2 1.2-3 2.5-5 4-8 5-9 7-12 10-16 12-20 13-20 15-20
Working Weight (kg) 1170 1400 1500 1600 2000 2500 2700 3000 5000 13000
Pressure - Open/Close (bar) 350 350 350 350 350 350 350 350 350 350
Oil Flow - Open/Close (lpm) 120 150 160 170 180 200 200 200 300 350
Min Pressure - Rotation (bar) 190 190 190 190 190 190 190 190 190 220
Max Pressure - Rotation (bar) 210 210 210 210 210 210 210 210 210 250
Oil Flow - Rotation - l/min (mm) 25 35 35 35 35 35 35 35 60 100
Width (mm) 1000 900 1000 1200 1200 1200 1360 1500 1500 1800
Max Opening (mm) 1950 2100 2100 2100 2250 2230 2230 2460 3000 4400
Height (mm) 1300 1500 1500 1500 1650 1700 1750 1800 2000 3000
Capacity (l) 700 750 800 850 900 1000 1100 1300 1600 4600
Closing Force (kN) 55 55 68 68 80 90 90 90 130 180
Excavator Range (t) 16-21 16-24 17-28 20-28 25-38 28-45 30-50 35-50 45-100 100-200
Model Shown - PSG1002
ProDem Heavy Duty Selector Grabs are designed for selective demolition, sorting and loading of recyclable
materials.

A C DB E HGF
A CUSTOMISED TOOTH TYPE
welded type or bolt on replaceable type options
B HARDENED TEETH
made of special wear resistant steel
C FULLY REVERSIBLE RECTANGULAR BLADES
for lower maintenance cost
D USER-FRIENDLY BLADE CLEARANCE
adjustment by using a single adjusting nut efficiency
E SINGLE-PIN TYPE JAW MECHANISM
for enhanced shearing force working
& maintenance efficiency
F SPEED-VALVE
for high speed jaw opening & closing
G HEAVY DUTY HYDRAULIC 360° ROTATION UNIT
with heavy duty rotation motor
H FOUR DIFFERENT INTERCHANGEABLE JAWS
for crushing, pulverising, shearing and demolition
MULTI
The ProDem range of Multi-Processors feature interchangeable jaw sets mounted on a single base providing
the efficiency of four tools in one body.
CRUSHING JAW SET (C)
For the primary demolition
operations. Bringing down the
main structure of a building.
DEMOLITION JAW SET (D)
Specially designed and
engineered for mixed concrete
and steel applications, combining
the advantages of Shear Jaw Set
and Concrete Jaw Set. Processing
heavily reinforced concrete
structures and concrete encased
I-Beam steel barrels without jaw
change.
PULVERISING JAW SET (P)
For the secondary demolition
operations. Starting to process
the demolished materials.
Separating reinforcing bar
from concrete for example
SHEAR JAW SET (S)
The shear jaw set can be used
on all industrial demolition
sites for cutting materials such
as section bars, pipes, tanks,
railway carriages, etc.
PM
P400
-S
PM
P320
-S
PM
P320
-P
PM
P320
-D
PM
P320
-C
PM
P220
-S
PM
P220
-P
PM
P220
-D
PM
P220
-C
Working Weight (kg) 2040 2050 2210 1880 3030 3001 3130 2990 4400
Overall Length (mm) 2311 2276 2327 2160 2533 2565 2563 2533 3283
Overall Width (mm) 1483 1368 1508 1083 1684 1560 1643 1332 1609
Max Jaw - Opening (mm) 903 797 893 503 1119 983 1008 573 700
Cutting Blade - Length (mm) 237 355 237 348 240 461 240 563 620
Required Oil Flow (lpm) 150-250 150-250 150-250 150-250 200-300 200-300 200-300 200-300 280-360
Max Operating Pressure - l/min 320 320 320 320 320 320 320 320 350
Max Crushing Force - (t) 190 215 190 223 317 315 315 334 594
Recommended Carrier Weight (t) 20-28 20-28 20-28 20-28 28-36 28-36 28-36 28-36 36-52
Model Shown - PMP220 with D Jaw
PROCESSORS

STATIC
A C DB E F
A HARDENED TEETH
made of special materials for enhanced durability
B FULLY REVERSIBLE RECTANGULAR BLADES
for lower maintenance cost
C BOLT ON TOOTH STYLE (model variant)
for quick and effective replacement - welded type is
also available
D CRACKING TOOTH
on the outer end of jaw for high productivity during
pulverising
E TRUNNION SUPPORTED TYPE CYLINDER
for maximum pulverising power throughout jaw
closing cycle as well as opening motion
F INTEGRATED SPEED VALVE
for increased speed and performance
Produced with increased power and durability by state-of-the-art technology, ProDem Pulverisers have been
designed for both primary demolition work, secondary concrete reduction and material sorting.
PHP220
PHP190
PHP160
PHP050
PHP320
Working Weight (kg) 500 1100 1375 1890 2745
Overall Length (mm) 1245 1658 1985 2181 2371
Jaw Width - Fixed (mm) 370 384 438 470 532
Jaw Width - Moving (mm) 252 330 350 346 370
Max Jaw - Opening (mm) 630 680 732 889 1049
Cutting Blade - Length (mm) 100 240 240 360 360
Required Oil Flow (lpm) 50-80 100-180 150-250 150-250 200-300
Max Operating Pressure (bar) 210 320 320 320 320
Crushing Force - tip (t) 43 100 106 171 173
Applicable Carrier Weight (t) 4.5-8.0 13-20 16-25 20-28 28-42
Model Shown - PHP320
PULVERISERS

ROTATING
A C DB E F
A HARDENED TEETH
made of special materials for enhanced durability
B BOLT ON TOOTH STYLE
for quick and effective replacement - welded type is
also available
C FULLY REVERSIBLE RECTANGULAR BLADES
made of special materials for enhance durability
D TRUNNION-SUPPORTED TYPE CYLINDER
for maximum pulverising power throughout the
entire operation positioning of materials
E HEAVY DUTY HYDRAULIC 360° ROTATION UNIT
allowing fast and targeted positioning of materials
F INTEGRATED SPEED VALVE
with cylinder delivering fast cycle times and
increased power
PHP350R
Produced with increased power and durability by state-of-the-art technology, ProDem Pulverisers have been
designed for both primary demolition work, secondary concrete reduction and material sorting.
Model Shown - PHP250R
PHP250R
PHP200R
PHP160R
PHP050R
Jaw Width - Fixed (mm) 465 384 438 470 532
Jaw Width - Moving (mm) 208 330 350 346 370
Max Crushing Force - (t) 50 100 170 196 224
Applicable Carrier Weight (t) 4.5-8.0 13-20 17-28 22-30 28-40
PULVERISERS

PM
C030
PM
C025
PM
C020
PM
C015
A C DB E F
A KNOCK ROUND’ ROTATION
with an adjustable bearing
B SPEED-UP VALVE
(optional)
C HIGH POWER CYLINDER
D EASY MAINTENANCE
protected hose routing inside the frame
E FULLY REVERSIBLE LONG LIFE RECTANGULAR
BLADES with max. 4 edges and made of HARDOX
F HARDENED JAW
made of HARDOX
MINI
PM
C050
Overall Width (mm) 659 709 800 776 850
Max Jaw - Depth (mm) 258 294 338 367 -
Jaw Width (mm) 30 40 40 50 96
Crushing Force - tip (bar) 210 230 270 270 -
Max Crushing Force - Point A 36 47 62 64 99
Rotation Type Free Free Free Free
Free
Hyd. Optional
Recommended Carrier Weight - (t) 1.5-2 2-3 2.5-3.5 3-4.5 4.5-8
ProDem Mini Crushers boast rotation without the need to have a hydraulic rotation circuit on your excavator
Model Shown - PMC030
L
JW
JD
W
CRUSHERS

MINI
BA C D E F
A HIGH STRENGTH AND WEAR RESISTANCE
MATERIALS FOR RELIABILITY
B LIGHTWEIGHT DESIGN
helps stability during machine operation
C TRUNNION MOUNTING CYLINDER
creates compact design and higher power
D KNOCK ROUND OR HYDRAULIC ROTATION
model variants available
E AVAILABLE WITH BOLT ON MOUNTING BRACKET
DESIGN
F REPLACEABLE PIERCING TIPS
PM
S050R
PM
S030R
PM
S020R
Weight (kg) 190 290 500
Jaw Opening (mm) 205 230 290
Total Width (mm) 478 563 720
Total Length (mm) 1085 1247 1468
Total Height (mm) 290 350 465
Max Cutting Force (t) 65 111 156
Rotation Type Free Free
Free
Hyd. available
Min Carrier Weight (t) 1.5-3.0 2.5-5.0 4.5-8.0
Model Shown - PMS050R
Material
Steel Tube
mm
Solid Bar
mm
Cable
Diameter
mm
Angle
mm
I-Beam
mm
Channel
mm
H-Beam
mm
Flat Bar
mm
Ø Ø xT Ø ØxEA HxWxT HxWxT HxWxT HxWxT WxT
PMS020R Ø75x4.5T Ø30 Ø25x 4 60x60x5T 100x75x5T 75x40x5T N/A 100x10T
PMS030R Ø120x4.5T Ø40 Ø25x 6 80x80x5T 125x75x5.5T 100x50x5T N/A 100x12T
PMS050R Ø210x5T Ø50 Ø25x8 100x100x10T 150x125x8.5T 150x75x7T 125x125x10T 180x16T
MINI SHEAR APPETITE
ProDem Mini Shears offer rotation and high cutting power for use on compact excavators in demolition and
recycling environments.
SHEARS

A C DB E
A SELF-LUBRICATING, MAINTENANCE FREE
self-aligning double row spherical roller bearing
provides a long service life to rotating components
B HEAVY DUTY GEAR MOTOR
heavy duty and high efficiency gear motor with
splined shaft and high pressure motor seals prevent
easy damage caused by pressure shock during
startup and shutdown
C EASY AND VERSATILE MOUNTING
adaptor mount style enables the ProDem
compactors to be mounted to any carrier in the
recommended weight class
D SINGLE HOSE BLOCKS
valve pack as standard – flow control valve (priority
flow divider) regulates hydraulic in-flow to the
motor and prevents it from over-speeding. Thus, the
compactor can be installed on carrier not equipped
with a flow control valve on its auxiliary plumbing
E CUSHION RUBBER
specially designed cushion rubbers protect machine
and operator from vibrations
PHC300
PHC200
PHC150
PHC100
PHC050
G
PHC050
N
Working - Adapter Mount Type (kg) 261 341 430 689 1094 1502
Baseplate Size - w x l (mm) 320x745 500x800 610x900 740x1050 860x1200 1000x1300
Impulse Force (t) 2.1 2.1 4 6.4 11.2 17.3
Vibrations (per minute) 2100 2100 2000 2000 2000 2000
Recommended Carrier Weight (t) 4-6 4-6 6-13 11-20 17-27 26-40
ProDem Hydraulic Compactors enable you to maximize productivity and minimize the downtime of your
excavator whilst improving safety when compacting material in deep excavators.
EXCAVATOR
Model Shown - PHC200
H
COMPACTORS

DIGGING
DCS2-400
DCS2-270
DCS05RANGE
DCS2-500
DCS2-300
DCS1
RANGE
DCS2-600
DCS3-300
DCS3-400
DCS3-500
DCS3-600
DCS3-700
DCS3-800
Content (SAE) L 90 100 135 170 205 140 185 230 275 320 365
Weight (kg) 255 260 275 290 305 535 550 575 590 610 625
Grab Width E (mm) 270 300 400 500 600 300 400 500 600 700 800
Number of Teeth 3 3 3 5 5 3 3 5 5 7 7
Excavator Weight Class (t) 5-9 5-9 5-9 5-9 5-9 9-15 9-15 9-15 9-15 9-15 9-15
Max Grab Capacity (t) 2 2 2 2 2 2 2 2 2 2 2
Max Load Rotary Engine (t) 4.5 4.5 4.5 4.5 4.5 9 9 9 9 9 9
Material Weight Up (t/m3
) 2 2 2 2 2 2 2 2 2 2 2
Operating Pressure Max - open/closing
(bar) 300 300 300 300 300 350 350 350 350 350 350
Operating Pressure Max - rotation (bar) 250 250 250 250 250 140 140 140 140 140 140
Closing force max (kN) 27 27 27 27 27 40 40 40 40 40 40
A C DB
A TEETH
bolt on replaceable forged teeth
B RAM GUARD
offers full protection of cylinder
C ROTATION MOTOR
fully protected compact rotary motor, endless
hydraulic rotation with integrated pressure limitation
D DIGGING SHELLS
all models throughout the range have
interchangeable shells that can be changed by 3
point pin on system
DCS4-500
DCS4-300
DCS4-600
DCS4-400
DCS4-700
DCS4-800
DCS4-900DCS4-1000
DCS5-400
DCS5-800
DCS5-500
DCS5-1000
DCS5-600
DCS5-1200
Content (SAE) L 180 240 300 360 420 480 540 600 340 430 520 700 880 970
Weight (kg) 675 720 750 780 855 885 915 945 1200 1250 1295 1390 1550 1600
Grab Width E (mm) 300 400 500 600 700 800 900 1000 400 500 600 800 1000 1200
Number of Teeth 3 3 3 5 5 7 7 9 3 3 5 7 9 11
Excavator Weight Class (t) 13-21 13-21 13-21 13-21 13-21 13-21 13-21 13-21 22-30 22-30 22-30 22-30 22-30 22-30
Max Grab Capacity (t) 4 4 4 4 4 4 4 4 6 6 6 6 6 6
Max Rotation Load (t) 9 9 9 9 9 9 9 9 15 15 15 15 15 15
) 3 3 3 3 3 3 3 3 3 3 3 3 3 3
Operating Pressure Max -
Open/Closing (bar) 350 300 300 300 300 300 300 300 300 300 300 300 300 300
Operating Pressure Max -
Rotation (bar) 140 140 140 140 140 140 140 140 140 140 140 140 140 140
Clamping force max (kN) 67 67 67 67 67 67 67 67 95 95 95 95 95 95
Model Shown - DCS5
ProDem Digging Grabs offer versatile digging solutions for all excavators. All ProDem Digging Grabs are
available with bolt-on extension shafts and bolt-on digging teeth. The ProDem DCS range boasts a unique
quick change shells system which enables operators to change the size of the shell depending on job
requirements.
CLAMSHELLS
PLEASEENQUIRE
PLEASEENQUIRE

A C DB
A TIPS
forged manganese-replaceable,
B CYLINDER PROTECTION
full cylinder over-stroke protection.
C ROTATION MOTOR
D SHELLS
from high-strength ﬁne-grain steel, three, four and
ﬁve shell versions available
ORANGE PEEL
M
T5.5/M
H
M
T5.5
M
T4.5/M
H
M
T4.5
M
T3.5/M
H
M
T3.5
Excavator Weight Class (t) 16-20 19-23 20-30 22-40 30-45 40-70
Max. Grab Capacity (t) 4 4 8 8 10 10
Max. Rotation Load (t) 15 15 15 15 20 20
Working Pressure - Rotation (bar) 140 140 140 140 140 140
Working Pressure - Open/Close (bar) 300 300 350 350 300 300
Max. Flow - Rotation (l/min) 35 35 35 35 30 30
Max. Flow - Open/Close (l/min) 90 90 115 115 90 90
M
T3.5-600
M
T3.5-300
M
T4.5-400
M
T3.5-400
M
T4.5-600
M
T4.5-800M
T4.5-1000M
T4.5-1250
M
T5.5-600
M
T5.5-800M
T5.5-1000M
T5.5-1250
Capacity (l) 300 400 600 400 600 800 1000 1250 600 800 1000 1250
Weight (kg) 1405 1450 1480 1730 1805 1940 1980 2010 2245 2315 2400 2515
Diameter (mm) (Open) 1930 2065 2230 1930 2160 2435 2620 2805 2240 2425 2600 2890
Height A (mm) (Closed) 2140 2210 2335 2190 2315 2485 2590 2700 2395 2490 2610 2750
Height B (mm) (Open) 1760 1785 1845 1830 1775 1930 1970 2000 2030 2070 2100 2150
Width C (mm) )Closed) 1250 1310 1390 1340 1450 1510 1630 1710 1530 1590 1660 1880
Width D (mm) (Open) 2100 2250 2430 2100 2340 2650 2860 3060 2440 2640 2840 3150
Rotating Connector Width F (mm) 114 114 114 114 114 114 114 114 149 149 149 149
Mounting Pin Diameter G (mm) 70 70 70 70 70 70 70 70 80 80 80 80
Model Shown - MT4.5
ProDem Orange Peel Grabs are available in a number of different styles. The MT Series offers ultimate power
and reliability with slew ring/motor protection, easy access to hydraulic cylinders via protection cover. In this
range ProDem offers grabs from a 300-1250 litre volume.
HALF OPEN CLOSEDOPEN
GRABS

REHANDLING
A C EDB
A CUTTING EDGES
sides and bottom cutting edges are manufactured
from high-strength fine-grain steel, reinforced with
Hardox HB500 profiles
B HOSE PROTECTION
protection shield on rotate motor for hose
connectors.
C ROTATION MOTOR
D SHELL COVERS (OPTIONAL)
are available with steel covers when handling light
materials
E SHELLS
are made from high-strength fine-grain steel. Shells
are interchangeable throughout each model
RSC6/M
H
RSC6
RSC5/M
H
RCS5
RCS4/M
H
RCS4
Excavator Weight Class (t) 12-21 18-25 22-35 26-45 36-50 46-80
Max. Grab Capacity (t) 4 4 8 8 12 12
Max. Rotation Load (t) 15 15 15 15 25 25
) 2 2 3 3 3 3
Working Pressure - Rotation (bar) 140 140 140 140 200 200
Working Pressure - Open/Close (bar) 300 300 320 320 320 320
Max. Capacity - Rotation (l/min) 35 35 35 35 50 50
Max. Capacity - Open/Close (l/min) 110 110 140 140 170 170
RCS6-3000
RCS6-2500
RCS6-2000
RCS5-2500
RCS5-2000
RCS5-1500
RCS4-1400
RCS4-1200
RCS4-1000
Capacity (l) 100 1200 1400 1500 2000 2500 2000 2500 3000
Weight (kg) 1325 1400 1475 1900 2100 2300 2920 3100 3280
Shell Width (mm) 1100 1400 1600 1200 1600 2000 1200 1500 1800
Height A (mm) (Closed) 2480 2480 2480 2500 2500 2500 3130 3130 3130
Height B (mm) (Open) 1780 1780 1780 1730 1730 1730 2120 2120 2120
Width C (mm) (Closed) 1770 1770 1770 1980 1980 1980 2390 2390 2390
Width D (mm) (Open) 2130 2130 2130 2360 2360 2360 2860 2860 2860
Rotator Connection Width F (mm) 114 114 114 114 114 114 149 149 149
Mounting Pin Diameter G (mm) 70 70 70 70 70 70 80 80 80
Model Shown - RCS6
ProDem Clamshell Grabs are class leading in ingenuity and performance, offering a range of volumes from
1000 to 8000 litres. The RCS range will give the operator maximum control of any rehandling application.
ProDem are able to offer customised grabs to suit each customer’s application and requirements.
CLAMSHELL BUCKETS

TIMBER
A C DB
A WEAR RESISTANT QUALITY MATERIALS
used for maximum durability and minimum
downtime
B ROTATION MOTOR
C INTERLOCKING TINES - ALLOWING A TIGHT
CLAMPING OF THE LOG OR TRUNK
D RAM & CYLINDER OVERSTROKE PROTECTION
heavy duty ram protection
Model Shown - TG5-800
ProDem offer 2 styles of Timber Grabs suitable for material handlers and excavators from 2-65 ton operating
weight. The ProDem Timber Grabs can be customised to suit your application and requirements.
TG028-L
TG4.5-1500
TG030
TG4.5-2000
TG050
TG5.5-1500
TG4-650
TG5.5-2000
TG4.5-800
TG035-L
TG4.5-1750
TG040
TG5.5-1250
TG4-500
TG5.5-1750
TG4-800
TG5.5-2500
TG4.5-1000
TG4.5-1250
Volume (m²) 0,28 0,35 0,30 0,40 0,50 0,5 0,65 0,8 0,80 1,0 1,25
Weight (kg) 185 235 361 441 471 780 830 900 1385 1465 1515
mm (E+E1) 335/375 470/520 410/480 460/530 460/530 520/660 520/660 660/860 840/700 840/700 840/700
Height A Closed mm 1060 1190 1315 1345 1410 2410 2490 2660 2760 2830 2960
Height B Open mm 980 1115 1100 1130 1170 1960 2000 2085 2095 2145 2190
Min Log Dia. C mm 90 100 110 150 180 150 150 200 50 90 110
Max Opening D mm 1280 1950 1890 2005 2145 1820 1950 2255 2380 2515 2765
Rotation Connection
Width F mm 775 800 965 975 1000 115 115 115 114 114 114
Mounting Pin
Diameter G mm - - - - - 70 70 70 70 70 70
Weight Class (t) 2-7 2-7 8-14 8-14 8-14 15-21 15-21 15-21 20-30 20-30 20-30
Material Handler
Weight Class N/A N/A N/A N/A N/A 18-25 18-25 18-25 22-35 22-35 22-35
Volume (m²) 1,5 1,75 2 1,25 1,5 1,75 2,0 2,5
Weight (kg) 1525 1700 1900 2200 2240 2300 2350 2470
mm (E+E1) 840/700 840/700 840/700 840/700 840/700 840/700 840/700 840/700
Height A Closed mm 3080 3190 3315 3260 3385 3500 3500 3880
Height B Open mm 2230 2240 2315 2460 2505 2545 2545 2675
Min Log Dia. C mm 125 150 240 100 120 140 140 170
Max Opening D mm 2990 3190 3465 3825 3055 3275 3275 4000
Rotation Connection
Width F mm 114 114 114 149 149 149 149 149
Mounting Pin
Diameter G mm 70 70 70 80 80 80 80 80
Weight Class (t) 20-30 20-30 20-30 30-45 30-45 30-45 30-45 30-45
Material Handler
Weight Class 22-35 22-35 22-35 35-65 35-65 35-65 35-65 35-65
GRABS
MODEL VARIATION

HYDRAULIC
The Dynaset Hydraulic Magnet range provides reliable and easy magnetic lifting with any machine without
the need of any maintenance.
* Electro magnets and machine mounted generators available upon request.
A B C D
A EASILY ACCESSIBLE HOSE CONNECTIONS
B LIFTING CHAINS INCLUDED
quick hitch mounting bracket available
as an option
C HEAVY DUTY BODY
allowing the toughest applications
D MOTOR IS FULLY ENCLOSED
Model Shown - HMag 700-18-K
HM
AG700-18-K
HM
AG900-32-K
HM
AG1200-48-K
HM
AG1400-54-K
Working Weight (kg) 350 850 1500 3000
Diameter (mm) 720 950 1250 1450
Power (220 vdc kw) 3 4,9 9 10
Tear-off w/air gap Ømm 300 Lifting Capacity (kg) 5500 10500 15000 18000
Slabs/Blocks Lifting Capacity (kg) 3600 6600 14800 19200
Pig Iron Lifting Capacity (kg) 130 290 580 1000
Scrap Lifting Capacity - grade 3A (kg) 80 200 370 530
Scrap Lifting Capacity - grade 24 (kg) 70 190 360 510
Scrap Lifting Capacity - grade 40 (kg) 40 100 190 240
Hydraulic Input (l/min) 18 32 48 54
Hydraulic Input (max./eff.bar) 350/210 350/210 350/210 350/210
MAGNETS

A GREATER DRILLING DEPTH
with a drive that can go down the hole
B COMPACT, POWERFUL PLANETARY GEARBOX
C HIGH QUALITY EATON BELL MOTOR
D 2 PIECE SHAFT, LIFETIME PULLOUT WARRANTY
E REPLACEABLE WEAR PARTS
i.e teeth and pilot tooth
PDD
PDX
PDX2
PDX3
PD3
PD4
PD5
PD6
Excavator Weight Class (t) .75-2 .75-2 .75-2 2-5 2-5 2-5 2-5 2-5
Min - Max Rec Flow (lpm) 15-45 20-50 30-50 30-55 45-75 55-85 60-95 70-115
Max Torque (Nm) @ 240 bar 1200 1800 2350 2850 3600 4450 5150 5600
Pressure Valve Fitted - - - - Opt. Opt. Opt. Opt.
Max Pressure (bar) @ 60 lpm 240 240 240 240 240 240 240 240
Max Flow (lpm) @ 130 bar 115 115 115 115 115 115 115 115
Power (Kw) 25 25 25 25 25 25 25 25
Overall Length (mm) 557 557 557 579 579 579 579 730
Diameter (mm) 187 187 187 187 240 240 240 240
Weight (kg) 45 45 45 45 56 56 62 84
STD Output Shaft (mm) 65 65 65 65 65 65 75 75
Swing Control (SCS) - - - - Opt. Opt. Opt. Opt.
Proalign (Auger Alignment) - - - - Opt. Opt. Opt. Opt.
Recommended Auger A4/RC4 A4/RC4 A4/RC4 A4/RC4 A4/RC4 A4/RC4 A6/RC6 A6/RC6
Max Auger Dia Clay/Shale (mm) 400 400 450 450 600 750 900 900
Max Auger Dia Earth (mm) 500 500 600 600 750 900 1000 1000
Model Shown - PD4
sales@bph-uk.com 0845 017 6972
with a drive that can go down the hole
ACT, POWERFUL PLANETARY GEARBOX
C HIGH QUALITY EATON BELL MOTORHIGH QUALITY EATON BELL MOTORHIGH QUALITY EA
D 2 PIECE SHAFT, LIFETIME PULL
i.e teeth and pilot tooth
A B C D E
The innovative design allows the gearbox to go down the hole to maximise drilling depth without extensions,
eliminating downtime and minimises maintenance, optimising your returns. ProDem Planetary Auger Drives
are ﬁtted with ProDem Eaton Bell motors specially designed for drilling in most ground conditions.
EXCAVATOR
AUGERS 0.75-5T

PD6
PD4
PD7
PD5
PD8
PD10
PD12
PD15
PD18
PD25
PD22
PD30
PD50
PD40
Excavator Weight
Class (t) 5-10 5-10 5-10 5-10 5-10 5-10 10-20 10-20 10-20 10-20 20-50 20-50 20-50 20-50
Min - Max Rec Flow
(lpm) 55-85 60-95 70-115 75-115 80-115 85-115 70-230 70-230 70-230 70-230 70-230 70-230 70-230 70-230
Max Torque (Nm) @
240 bar 4450 5150 5600 6050 7050 8500 11300 13900 17600 22250 25800 30300 32700 38400
Pressure Valve Fitted Opt. Opt. Opt. Opt. Opt. Opt. Inc. Inc. Inc. Inc. Inc. Inc. Inc. Inc.
Max Pressure (bar) @
60 lpm 240 240 240 240 240 240 240 240 240 240 240 240 240 240
Max Flow (lpm) @
130 bar 115 115 115 115 115 115 230 230 230 230 230 230 230 230
Power (Kw) 25 25 25 25 25 25 60 60 60 60 60 60 60 60
Overall Length (mm) 579 579 730 734 854 854 950 1006 1006 1006 1152 1152 1152 1152
Diameter (mm) 240 240 240 240 290 290 290 290 290 290 355 355 355 355
Weight (t) 56 62 84 100 107 110 149 176 176 176 300 300 300 300
STD Output Shaft
(mm) 65 75 75 75 75 75 75 75 75 75 100 100 100 100
Swing Control (SCS) Opt. Opt. Opt. Opt. Opt. Opt. Opt. Opt. Opt. Opt. Opt. Opt. Opt. Opt.
Proalign (Auger
Alignment) Opt. Opt. Opt. Opt. Opt. Opt. Opt. Opt. Opt. Opt. Opt. Opt. Opt. Opt.
Recommended Auger
A4/
RC6
A4/
RC6
A4/
RC6
A4/
RC6
A4/
RC6
A4/
RC6
A8/
RC8
A8/
RC8
A8/
RC8
A8/
RC8
RC10/
RC11
RC10/
RC11
RC10/
RC11
RC10/
RC11
Max Auger Dia Clay/
Shale (mm) 750 900 900 900 1000 1000 1200 1200 1500 1500 1200 1200 1200 1200
Max Auger Dia Earth
(mm) 900 1000 1000 1000 1200 1500 1600 1600 1600 1600 1600 1600 1800 1800
A GREATER DRILLING DEPTH
with a drive unit that can go down the hole
B COMPACT, POWERFUL PLANETARY GEARBOX
C HIGH QUALITY EATON BELL MOTOR
D 2 PIECE SHAFT, LIFETIME PULLOUT WARRANTY
i.e teeth
A B C D E
Model Shown - PD4
EXCAVATOR
AUGERS 5-50T

SKIDSTEER
PD3
PD4
PD5
PD6
Rec Flow Range (lpm) 45-75 55-85 60-95 70-115
Nominal Torque (nm) 3600 4450 5150 5600
Pressure Valve Fitted Opt. Opt. Opt. Opt.
Max Pressure @ 60lpm (bar) 240 240 240 240
Max Flow @ 130lpm (bar) 115 115 115 115
Max Power (kw) 25 25 25 25
Overall Length (mm) 579 579 579 730
Diameter (mm) 240 240 240 240
Weight (kg) 56 56 62 84
STD Output Shaft (mm) 65 65 75 75
Swing Control Opt. Opt. Opt. Opt.
Proalign Opt. Opt. Opt. Opt.
Rec Auger A4/RC4 A4/RC4 A6/RC6 A6/RC6
Max Auger DIA Clay/Shale (mm) 600 750 900 900
Max Auger DIA Earth (mm) 750 900 1000 1000
A B C ED
A 2 PIECE SHAFT DESIGN
B INTEGRATED MOTOR & OUTPUT SHAFT
C ABILITY TO ADD SWING CONTROL AND
PROALIGN
D TOP MOUNTED HOSE PORTS
E EATON MOTOR
Model Shown - PD4 with Swing Control System
AUGERS

AUGER
A B C
E
F G
D
A HITCHS/FRAMES
These are connectors used between the parent machine and its attachment. A range of hitches
are available up to 90t excavators. Configurations include single pin, double pin, fixed and loose
pin, as well as the developed Ryno hitch for larger drives.
B RYNO HITCH
The Ryno Hitch was designed to make it easier to connect large augers and anchors to an
auger drive. Using a Ryno Hitch will eliminate the costly need for a crane to connect piling
tools to your auger drive.
C SWING CONTROL
Integrated into the hitch and drive hood, ProDem’s swing control uses grease filled cylinders to
reduce the forward /back and side to side movements of your auger drive and auger. It is fully
independent of your hydraulic system requiring no additional hosing.
Swing Control makes your auger easier to operate and control allowing faster return back into
the hole, greatly improving operator efficiency and effectiveness. It also makes your work site
safer by reducing the danger of an auger striking a person or property while swinging freely
during machine movements.
D AUGER EXTENSIONS
Earth Drill Extensions for machines up to 8 tonne have a female to male design while
extensions for machines above 8 tonnes are an ingenious telescopic design which utilises an
inner and outer extension.
E AUGERS
Augers are built from high grade steel and feature ideal flight pitches and advanced cutting
head design providing superior drilling performance. Over 30 years of design and development
has produced the highest quality range of earth augers on the market today. Please enquire for
the individual auger to suit your needs.
F PROALIGN
This is an auger alignment system which indicates when an auger or screw pile is not vertical
or plumb ensuring correct alignment when drilling or anchoring. Proalign monitors forward/aft
and side to side positioning.
G WEAR PARTS
Please enquire for our vast range of wear parts.
Auger Accessories
Hitchs/Frames – These are connectors used b
attachment. A range of hitches are available u
include single pin, double pin, fixed, and loose
Ryno hitch for larger drives.
Ryno Hitch - The Ryno Hitch was designed to
connect large augers and anchors to an auger
Ryno Hitch will eliminate the costly need for a
pilling tools to your auger drive.
Swing Control - Integrated into the hitch & d
control uses grease filled cylinders to reduce
side movements of your auger drive and aug
your hydraulic system requiring no additiona
Swing Control makes your auger easier to op
faster return back into the hole, greatly impr
effectiveness. It also makes your work site sa
an auger stricking a person or property while
machine movements.
Auger Extensions - Earth Drill Extensions for m
a female to male design while extensions for m
an ingenious telescopic design which utilises an
G
Hitchs/Fram
attachment
include sing
Ryno hitch
Ryno Hitch
connect lar
Ryno Hitch
pilling tools
Swing Con
control use
side move
your hydra
Swing Con
faster retu
effectiven
an auger s
machine m
Auger Exten
a female to m
an ingenious
Augers - Augers
Ryno Hitch - The Ryno Hi
connect large augers and
Ryno Hitch will eliminate
pilling tools to your auger
Swing Control - Integrat
control uses grease filled
side movements of your
your hydraulic system re
Swing Control makes you
faster return back into th
effectiveness. It also ma
an auger stricking a pers
machine movements.
Auger Extensions - Earth D
a female to male design w
an ingenious telescopic de
Augers - Augers are built from
flight pitches and advanced cu
drilling performance. Over 30
produced the highest quality
today. Please enquire for the
ACCESSORIES

SKIDSTEER
M
INI750
M
INI900
750
900
XD
900
XD
1200
XD
1500
Length (mm) 1880 1920 1770 1920 2225 2532 2689
Horizontal Height (mm) 800 668 668 668 777 777 836
Width (mm) 960 1212 1212 1212 1212 1212 1212
Chain Size (inch) 1.654 1.654 1.654 1.654 2 2 2
Weight – No Chain (kg) 145 167 155 172 238 238 432
Hydraulic Flow (lpm) Up to 45 Up to 45 30-60 40-75 60-115 70-115 90-130
Cutting Width (mm) 100-200 100-200 100-200 100-200 150-300 150-300 150-300
Max Cutting Depth (mm) 750 900 750 900 900 1200 1500
A B C ED
A AUGER
for removal of spoil to one side
B SIDE SHIFT
for cutting close to permanent objects
C ADJUSTABLE SKID FOOT
allowing constant trench depth control
D POWERFUL QUALITY PLANETARY DRIVE
E VARIOUS CHAINS AVAILABLE
please enquire
Model Shown - Bigfoot
Compact yet powerful Trencher fitted with a quality ProDem Planetary Drive & Eaton Hydraulic Motor. The
advanced design gives the operator consistent digging depth, efficient spoil removal and finely crumbled
spoil for effective compaction back into the trench whilst providing minimal ground disturbance to
surrounding conditions and a cleaner job finish.
TRENCHERS

PILING
EM
V550
EM
V550
EM
V450
EM
V450
EM
V300A
EM
V300A
EM
V220
EM
V220
EM
V70
EM
V70
Static Moment (kgm) 0.7 2.3 4.6 6.9 8.3
Frequency (vpm) 3000 3000 2400 2460 2500
Centrifugal force (kN) 70 220 300 450 550
Amplitude - Peak to Peak (mm) 3.4 12 14.7 13.7 13.7
Min Required Flow Rate (l/min) 30 90 130 195 256
Max Allowable Flow Rate (l/min) 120 250 250 350 400
Min Hydraulic Pressure (bar) 240 280 280 270 280
Max Hydraulic Pressure (bar) 350 350 350 350 350
Min Hydraulic Pressure (bar)
Motor Power kw 12 50 60 88 120
Dynamic Mass (kg) 410 370 625 1008 1150
Total Mass (kg) 520 525 965 1275 1500
Max Pile Mass (kg) 800 800 800 1000 1400
Max Push/Pull Loading (kg) 2800 7500 15000 15000 15000
Recommended Carrier Weight (t) 5-15 7-22 12-35 25-45 30-55
Clamp Force (t) 30 26.5 36 54 66
Dimensions A (mm) 445 445 615 615 646
Dimensions B (mm) 40 40 25 32 50
Dimensions C (mm) 275 275 250 230 370
Dimensions D (mm) 431 431 582 640 708
Dimensions E (mm) 431 431 429 510 555
Dimensions F (mm) 850 850 927 945 1137
Dimensions G (mm) 1120 1120 1200 1250 1477
Dimensions H (mm) 130 130 150 175 190
A
H
C
ED
F
B
G
BPH offers excavator mounted Piling Hammers which have been designed speciﬁcally to work in place of an
excavator bucket to drive and extract piles. These attachments are low maintenance and are simple and fast
to install on any excavator.
A AUTOMATIC HYDRAULIC CLAMP OPERATION
B SLIM DESIGN TO DRIVE SINGLE PILE SHEETS
C SIMPLE AND FAST ATTACHMENT TO EXCAVATOR
quickhitch mounting bracket available
D COMPACT, ROBUST AND RELIABLE
– NO ELECTRICS
E TRANSPORT AND STORAGE FRAME
A B C D E
Model Shown - EMV300
HAMMERS

EXCAVATOR
As the sole importer of the Berti Hydraulic Flails and Mulchers we are able to offer a full range to suit 1.5 - 45
ton excavators. Designed for rigorous use on excavators, Berti Flails and Forestry Mulchers are reliable, cost
effective and powerful. With many different cutting widths and tooth/hammer/blade types please contact us to
discuss your requirements in detail to ensure that you get maximum performance.
A LEVELLING ROLLER
B ENCLOSED MOTOR
C SELF-LEVELLING SUPPORT
with under plate for the mounting bracket
D PURPOSE MADE MOUNTING HITCH
E SIDE SKIDS
F REMOVABLE FRONT INSPECTION HOOD
FLAILS & MULCHERS
BA DC FE
Model Shown - GKR/SB 80
RA/SB115
NKR/SB
80
M
INI/SB
50
NKR/SB
100
NKR/SB
60
GKR/SB
60
GKR/SB
80
CKT/SB80
CKT/SB100
PARK/SB90PARK/SB110
RA/SB95
Cutting Width (mm) 500 600 800 1000 600 800 800 1000 900 1100 950 1150
Number of Hammers - - - - 8 12 12 16 12 16 8 10
Number of Blades 20 20 28 36 - - - - 48 36 24 30
Number of Drive Belts 2 - - - - - 2 2 2 4 3 3
Oil (lpm) 18-22 33-37 33-37 38-42 33-37 38-42 43-47 43-47 63-67 63-67 78-82 78-82
Working Pressure (bar) 220-260 220-260 220-260 220-260 220-260 220-260 195-205 195-205 215-225 215-255 215-225 215-225
Product Weight (kg) 100 145 165 185 165 190 230 260 425 455 420 460
Carrier Weight (t) 1.5-2 2-3 2-3 2-3 2.5-3.5 2.5-3.5 3.5-5.5 3.5-5.5 5.5-8 5.5-8 7.5-9 7.5-9
TFB/SB120
RA/SB125
TFB/SB140
TFB/SB100
TFB/SB160
TBM
/SB100
TBM
/SB120
TBM
/SB140
TFX/SB100
TFX/SB120
TFX/SB140
Cutting Width (mm) 1250 1000 1200 1400 1600 1000 1200 1400 1000 1200 1400
Number of Hammers 12 10 12 12 14 16 20 24 24 30 36
Number of Blades 36 30 36 36 42 - - - - - -
Number of Drive Belts 3 4 4 4 4 4 4 4 4 4 4
Oil (lpm) 78-82 88-92 88-92 105-115 105-115 105-115 105-115 105-115 88-92 105-115 105-115
Working Pressure (bar) 215-225 235-245 235-245 235-245 235-245 275-285 275-285 275-285 235-245 235-245 235-245
Product Weight (kg) 475 505 555 610 660 740 820 900 555 610 660
Carrier Weight (t) 7.5-9 9-13 9-13 9-13 9-13 12-16 12-16 12-16 11-16 11-16 11-16

EXCAVATOR
As the sole importer of the Berti Hydraulic Flails and Mulchers we are able to offer a full range to suit 1.5 - 45
ton excavators. Designed for rigorous use on excavators, Berti Flails and Forestry Mulchers are reliable, cost
effective and powerful. With many different cutting widths and tooth/hammer/blade types please contact us to
discuss your requirements in detail to ensure that you get maximum performance.
A C D EB F
A SIDE SKIDS WITH REPLACEABLE WEARING
UNDERSHOES
B REPLACEABLE, FIXED OR SWINGING HAMMERS.
models vary
C MADE TO MEASURE HITCH
D HYDRAULIC PISTON MOTOR
WITH DRAINAGE LINE models vary
E PROTECTIVE COVER FOR MOTOR
(behind the hoses)
F TRANSMISSION BELTS
high performance v-belts
Model Shown - EFX/SB 120
FLAILS & MULCHERS
EFX/SB
160
ECF
M
D/SB140
ECF
M
D/SB100
EFX
M
D/SB100
ECF
M
D/SB120
EFX
M
D/SB120EFX
M
D/SB140
ECF/SB
120
ECF/SB
140
ECF/SB
160
EFX/SB
120
EFX/SB
140
Cutting Width (mm) 1000 1200 1400 1000 1200 1400 1200 1400 1600 1200 1400 1600
Number of Hammers 16 20 24 24 30 36 20 24 28 30 36 42
Number of Blades - - - - - - - - - - - -
Number of Drive Belts 4 4 4 4 4 4 4 4 4 4 4 4
Oil (lpm) 110-115 110-115 110-115 110-115 110-115 110-115 110-115 155-160 155-160 130-140 160-165 160-165
Working Pressure (bar) 220-260 220-260 220-260 220-260 220-260 220-260 220-260 220-260 220-260 220-260 220-260 220-260
Product Weight (kg) 895 970 1100 865 940 1070 1240 1240 1430 1130 1300 1490
Carrier Weight (t) 15-20 15-20 15-20 15-20 15-20 15-20 18-30 18-30 18-30 20-35 20-35 20-35

AF/SSL160
AF/SSL135
AF/SSL180
AF/SSL145
AF/SSL200
M
D/SSL140
M
D/SSL160
M
D/SSL180
M
X/SSL140
M
X/SSL160
M
X/SSL180
Cutting Width (mm) 1350 1450 1600 1800 2000 1400 1600 1800 1400 1600 1800
Number of Hammers 12 14 14 16 18 24 28 32 36 42 42
Number of Blades 24 28 28 32 36 - - - - - -
Number of Drive Belts 3 3 3 3 3 4 4 4 4 4 4
Oil (lpm) 63-67 63-67 80-92 80-92 105-115 100-130 100-130 100-130 100-130 100-130 100-130
Working Pressure (bar) 195-205 195-205 215-225 215-225 150-225 230-260 230-260 230-260 230-260 230-260 230-260
Product Weight (kg) 640 675 690 720 810 1105 1180 1255 1135 1220 1300
Horsepower Required 50-90 50-90 50-90 50-90 50-90 70-120 70-120 70-120 70-120 70-120 70-120
SKIDSTEER
The SSL range gives all skidsteer users the versatility to carry out light grass/brush cutting to heavy forestry
operations with the fixed hammer mulchers fitted with the push over bar. Each flail/mulcher is carefully
matched to your skidsteer to ensure maximum performance at all times.
A SIDE SKIDS
B MANOMETER FOR WORKING PRESSURE
CONTROL
models vary
C PROTECTIVE BAR
MD/MX SSL models only
D LARGE DISCHARGE FLAP
with hydraulic operation
A B C D
MODEL VARIATION - AF/SSL
Model Shown - MD/SSL
Model Shown - AF/SSL
FLAILS & MULCHERS

A B
A UNIVERSAL BRACKET
65&80mm pins
B VARIABLE FORK DISTANCES
PALLET FORKS
EXCAVATOR
PFORK
1
Pin Size (mm) 60-80
Dipper Width (mm) 332
Pin Centers – Min/Max (mm) 440/500
Max Fork Reach (mm) 1200
Max Fork Width (mm) 1000
S.W.L (kg) 2000
Product Weight (kg) 370
The ProDem Pallet Forks enable the standard excavator’s versatility to increase considerably on any
construction site. The pallet forks are universal between a 13-22 ton excavator and are simply fitted by
changing a set of pins.
POST DRIVERS
The range of Rabaud Vibrating Post Drivers can be mounted onto any mini-excavator, backhoe loader or
telehandler. The Post Drivers offer the most efficient and effective method of driving posts and enable the
operator to work with precision and speed that is not possible from other attachments.
II15/35
IIPRO
15/35
II35/95
PRO
35/95
Striking Head (mm) 120/150 120/150 120/150 150
Hammer Power (stroke/min) 950 950 950 1500
Striking Power (joules/stroke) 230 230 230 250
Square Profile Length (mm) 500 500 800 800
Weight (kg) 155 160 380 335
Min Carrier Weight Range (t) 1.5-3.5 1.5-3.5 3.5-9.5 3.5-9.5
A STRONGLY BUILT
striking head Ø 120 mm and/or 150 mm
B HYDRAULIC HAMMER MOUNTED
on anti-wear and tear and removable
square profile
C DOES NOT DAMAGE POSTS
with power adjustment
D EXCELLENT ACCURACY
post is being held whilst striking
A B C D
Model Shown - II 15/35

& REPAIRS
PARTS, SERVICE
REPAIRS
At BPH Attachments we pride ourselves on being able to repair all makes and models of
Hydraulic attachments. Over recent years we have invested in specialist equipment to ensure
that repairs to your attachments are carried out in a cost effective and timely manner. From
specialist pits with hydraulically raising ﬂoors to large air driven torque multipliers which
allow us to give you the best service possible. All our work is carried out by competent industry
trained engineers. All repairs are quoted giving you a full report of the condition of your
attachment and supported by photographs of critical parts. All repairs are carried out using
high quality parts and carry a warranty.
SERVICING
BPH Attachments offer service contracts to ensure that you get the most production and
uptime from your attachment, whatever the brand and model. Your servicing will be carried out
by an expert in the ﬁeld of attachments who has been highly trained to deal with any technical
problem. All service contracts can be tailored to suit your needs whether it is a regular
monthly/6 monthly or annual services or an ad-hoc routine maintenance.
SPARE PARTS
BPH Attachments hold the most comprehensive parts stock in the UK. With over 5000 high
quality parts in stock at any one time we are able to provide a next day delivery service on parts.
If we do not have the part you are looking for, we will source it for you using our global contacts
and industry knowledge. We also supply high quality tools for all brands of hydraulic hammers
and parts for all types of hydraulic attachments.
Call us for friendly advice and technical support.
YOUR PROBLEM - OUR SOLUTION.

52 BPH, Gillmans Industrial Estate, Natts Lane, Billingshurst, West Sussex, RH14 9EZ, UK
BPH NATIONWIDE Business/Trading Name............................... Business/Trading Address...............................................................................................
..................................................................................................................................................................................................................
Main Tel No:.................................................. Purchase Ledger Tel No:..........................................Fax No:..........................................
Mobile Tel No:............................................... Email address: .................................................................................................................
Type of Business: Public Limited Company: Private Limited Company: Sole Trader: Partnership:
Are any of the directors, owners, or partners in this business un-discharged bankrupt? Yes/No
Have any of the directors, owners, or partners of this business he’d any other accounts with this company? Yes/No
If so please list account names: ..............................................................................................................................................................
LIMITED COMPANIES ONLY
Co Registration No:...................................... Date of Formation:....................................................Parent Company:..........................
BPH SALES CREDIT APPLICATION FORM
SOLE TRADERS/PARTNERSHIPS ONLY Home address(es) of proprietor/all partners
Full Name:........................................................................................Home Address:.............................................................................
..................................................................................................................................................................................................................
..................................................................................................................................................................................................................
..................................................................................................................................................................................................................
..................................................................................................................................................................................................................
NAME OF PEOPLE AUTHORISED
Full Name Position Verbal Order Written Order Order No Reg’d
...................................................................... ..................................
...................................................................... ..................................
NAME OF PEOPLE AUTHORISED
Full Name Position Direct Telephone No
...................................................................... .................................. .......................................................................................................
...................................................................... .................................. .......................................................................................................
TRADE REFERENCES
Company Name:...............................................................................Address:........................................................................................
...........................................................................................................Current Credit Limit £:.................................................................
Company Name:...............................................................................Address:........................................................................................
...........................................................................................................Current Credit Limit £:.................................................................
In processing your application for credit facilities we will make enquiries of credit reference agencies and other third parties who may record those enquiries. We may
also disclose information about the conduct of your account to credit reference agencies and other third parties. The information obtained from or provided to credit
reference agencies or other third parties may be used when assessing further applications for credit terms, for debt collection, for tracing and for fraud prevention.
The undersigned hereby conﬁrms that if credit facilities are approved the account will be paid as per our standard terms and conditions.
To be signed by a director, partner or proprietor of the business or authorised representative.
Signed:..................................................................................................................Date: ....................................................................
Print Name: ..........................................................................................................Position: ..............................................................
SERVICE NETWORK
BPH HQ

55sales@bph-uk.com 0845 017 6972
TERMS AND CONDITIONS OF SALE
1. GENERAL
1.1 The following definitions shall apply in these conditions:
‘BPH’ means BPH Attachments Limited and the supplier of the Goods;
‘Buyer’ means the person, firm or company who purchases the Goods from BPH;
‘Contract’ means the Buyer’s order and BPH’s acceptance of it in accordance with these
conditions; and
‘Goods’ means the goods agreed in the Contract to be purchased by the Buyer from
BPH.
1.2 Save as otherwise agreed in writing by BPH, these conditions shall govern the Contract
to the entire exclusion of any other conditions contained in or referred to in the Buyer’s
purchase order, confirmation of order, or specification or implied by law, trade custom,
practice or course of dealing.
2. BASIS OF SALE
2.1 Each order for Goods by the Buyer shall be deemed to be an offer by the Buyer subject to
these conditions. The Buyer shall ensure that its order is complete and accurate.
2.2 A binding contract shall not come into existence between BPH and the Buyer unless
and until BPH issues a written order acknowledgment to the Buyer, or BPH delivers the
Goods to the Buyer (whichever occurs earlier).
2.3 No order which has been acknowledged by BPH may be cancelled by the Buyer, except
with the agreement in writing of BPH and provided that the Buyer indemnifies BPH in
full against all loss, costs, damages, charges and expenses incurred by BPH as a result
of cancellation.
3. QUANTITY AND DESCRIPTION OF THE GOODS
3.1 The quantity and description of the Goods shall be as set out in BPH’s acknowledgment
of order.
3.2 All samples, drawings, descriptive matter, specifications and advertising issued by
BPH, and any descriptions or illustrations contained in BPH’s catalogues or brochures
are issued or published for illustrative purposes only and they do not form part of the
Contract.
3.3 Any typographical, clerical or other error or omission in any sales literature, quotation,
price list, acceptance of offer, invoice or other document or information issued by BPH
shall be subject to correction without any liability on the part of BPH.
3.4 BPH reserves the right (but does not assume the obligation) to make any changes in the
specification of the Goods which are required to conform with any applicable legislation,
or where the Goods are to be supplied to the Buyer’s specification, which do not
materially affect their quality or performance. Where BPH is not the manufacturer of the
Goods, BPH shall use reasonable endeavours to transfer to the Buyer the benefit of any
warranty or guarantee given by the manufacturer to BPH.
4. DELIVERY
4.1 Any delivery date specified in BPH’s acknowledgment of order is given in good faith but
time is not of the essence as to delivery of the Goods and BPH accepts no liability for any
loss or damage arising from delay in delivery or despatch of the Goods.
4.2 The Goods may be delivered by BPH in advance of the quoted delivery date on giving
reasonable notice to the Buyer.
4.3 Delivery shall be made during normal business hours (excluding bank or public
holidays).
4.4 The Buyer shall be responsible (at the Buyer’s cost) for preparing the delivery location
for the delivery of the Goods and for the provision of all necessary access and facilities
reasonably required to deliver and install the Goods. If BPH is prevented from carrying
out delivery or installation on the specified date because no such preparation has been
carried out, BPH may levy additional charges to recover its loss arising from this event.
4.5 The Buyer shall be deemed to have accepted the Goods when the Buyer has had 7 days
to inspect the Goods after delivery and has not exercised in writing its right of rejection
in accordance with clause 9.
4.6 BPH shall be responsible for any damage, shortage or loss in transit, provided that the
Buyer notifies it to BPH within 3 days of delivery of the Goods and that the Goods have
been handled in accordance with BPH’s stipulations. Any remedy under this clause 4.6
shall be limited, at the option of BPH, to the replacement or repair of any Goods which is
proven to BPH’s satisfaction to have been lost or damaged in transit.
5. RISK AND PROPERTY
5.1 If delivery is by BPH, or by a carrier appointed by BPH, the risk in the Goods shall
pass to the Buyer on delivery of the Goods to the place of delivery specified in BPH’s
acknowledgment of order. The carrier’s proof of delivery shall constitute proof of
delivery by BPH. In all other cases, the risk in the Goods shall pass to the Buyer on
collection of the Goods from BPH’s place of business.
5.2 The property in the Goods shall not pass to Buyer until the later of completion of
delivery, collection by the Buyer or when BPH has received in full all sums due to it in
respect of the Goods and any associated charges and of any other Goods delivered by
BPH to the Buyer.
5.3 Until property in the Goods has passed to the Buyer under clause 5.2, the Buyer shall:
5.3.1 hold the Goods on a fiduciary basis as BPH’s bailee;
5.3.2 store the Goods (at no cost to BPH) in satisfactory conditions and separately
from the Buyer’s other goods or that of a third party, so that it remains readily
identifiable as BPH’s property;
5.3.3 not destroy, deface or obscure any identifying mark or packaging on or relating to
the Goods; and
5.3.4 keep the Goods insured on BPH’s behalf for its full price against all risks with
a reputable insurer to the reasonable satisfaction of BPH, ensure that BPH’s
interest in the Goods is noted on the policy, and hold the proceeds of such
insurance on trust for BPH.
5.4 The Buyer’s right to possession of the Goods before ownership has passed to it shall
terminate immediately upon termination of the Contract or if the Buyer encumbers or in
any way charges the Goods, or if the Buyer fails to make any payment to BPH on the due
date.
5.5 The Buyer grants BPH, its agents and employees an irrevocable licence at any time to
enter any premises where the Goods are or may be stored in order to inspect it, or where
the Buyer’s right to possession has terminated, to remove it. All costs incurred by BPH in
repossessing the Goods shall be borne by the Buyer.
5.6 On termination of the Contract for any reason, BPH’s (but not the Buyer’s) rights in this
clause 5 shall remain in effect.
6. PRICE
6.1 The price of the Goods shall be the price stated in BPH’s acknowledgment of order.
6.2 Unless otherwise stated, the price quoted for the Goods is exclusive of delivery,
packaging, packing, shipping, carriage, insurance, value added tax and other taxes,
charges or duties.
6.3 BPH reserves the right, by giving notice to the Buyer at any time before delivery, to
increase the price of such of the Goods as has not been delivered to reflect any increase
in the cost to BPH which is due to any factor beyond the control of BPH (including
without limitation any foreign exchange fluctuation, currency regulation, alteration of
duties, change in legislation, significant increase in the costs of labour, materials or
other costs of manufacture), any change in delivery dates, quantities or specifications for
the Goods which is requested by the Buyer, or any delay caused by any instructions of
the Buyer or failure of the Buyer to give BPH adequate information or instructions.
7. PAYMENT
7.1 BPH may invoice the Buyer for the price of the Goods on or at any time after:
7.1.1 receipt of the Buyer’s purchase order number for the Contract;
7.1.2 issue of an order acknowledgment by BPH; or
7.1.3 delivery of the Goods,
whichever is the earlier.
7.2 Unless otherwise agreed, the Buyer shall pay for the Goods within 7 days of the invoice
date.
7.3 Payment for Goods supplied on credit shall be made on or before the last day of the
month following the month of the invoice date.
7.4 Time for payment of the price shall be of the essence of the Contract.
7.5 No right of set off shall exist in respect of any claims by the Buyer against BPH and the
Buyer shall not withhold all or any part of any sum which has become due for payment.
8. BUYER’S DEFAULT
8.1 If the Buyer fails to make payment of a sum when the sum becomes due, BPH shall be
entitled to charge the Buyer interest on the sum unpaid at the rate of 5% per annum over
the base rate of Lloyds TSB Bank Plc.
8.2 If any unpaid sum or part thereof shall remain in arrears 7 days after written demand
shall have been made thereof, BPH shall have the further right to terminate the Contract
and/or any such other Contract without prejudice to any other right or remedy which
BPH may have.
8.3 If the Buyer (being a company) shall pass a resolution or suffer an order of a court to
be made for its winding-up, or if a receiver shall be appointed, or (being an individual
or partnership) shall suspend payment or propose or enter into any composition with
creditors or suffer a receiving order in bankruptcy, then BPH may without prejudice to
any other right to recover the possession of any Goods supplied by BPH to the Buyer for
which payment has not been received in full, or such similar Goods supplied by BPH to
the Buyer to the value of the outstanding sum. Without prejudice to the generality of the
foregoing, if the said Goods are sold by the Buyer, then BPH’s beneficial interest shall
attach to any proceeds of such sale and BPH shall be entitled to call upon the Buyer to
assign all claims that the Buyer may have in respect of such sale.
9. WARRANTY AND LIMITATION OF LIABILITY
9.1 BPH warrants that any Goods supplied to the Buyer as new will be free from defects in
workmanship and/or materials, but the sole liability of BPH under such warranty shall
be limited to replacing, repairing, or issuing credit at BPH’s option for any Goods which
are returned, carriage paid, to BPH and which BPH accepts as having been defective in
materials or workmanship.
9.2 BPH shall incur no liability under this warranty:
9.2.1 unless BPH is notified of the defect within 7 days of the Buyer discovering
the defect and in any event within the warranty period specified on the order
acknowledgment for the Goods, such warranty period commencing on delivery; or
9.2.2 for any Goods in which the alleged defect is found on examination to have been
caused in whole or in part by misuse, neglect, overload, improper installation,
alteration or repair, accident or fair wear and tear.
9.3 Any repaired or replacement Goods shall be under warranty for the unexpired portion of
the warranty period.
9.4 BPH’s liability under this warranty shall in no event exceed the purchase price of the
Goods.
9.5 Save in the event of personal injury or death caused by the negligence of BPH, BPH
(including its employees, agents and sub-contractors) shall not in any circumstances be
liable, whether in tort, contract, misrepresentation or otherwise, for any loss or damage,
direct or consequential, of whatsoever nature or to whomsoever caused. The Buyer shall
indemnify BPH against all claims made against BPH by a third party in respect thereof.
9.6 All warranties, conditions and other terms implied by statute or common law are
excluded from the Contract to the fullest extent permitted by law.
9.7 Any service or advice which may be offered by BPH to the Buyer or to the user of the
Goods is rendered in all good faith but BPH shall not be liable for any loss or damage
arising therefrom.
10. HEALTH AND SAFETY
Whilst all products supplied by BPH are designed so as to minimise any risk to the user,
it is the responsibility of the user to ensure that safe working practices are observed
at all times in the installation, use and handling of the Goods and of any equipment in
which the Goods may be installed.
11. CONFIDENTIALITY AND BPH’S PROPERTY
11.1 The Buyer shall keep in strict confidence all technical or commercial know-how,
specifications, inventions, processes or initiatives which are of a confidential nature
and have been disclosed to the Buyer by BPH, and any other confidential information
concerning BPH’s business or its products which the Buyer may obtain.
11.2 All samples, demonstration models, materials, equipment and tools, drawings,
specifications, and data supplied by BPH to the Buyer shall at all times be and remain
the exclusive property of BPH, but shall be held by the Buyer in safe custody at its own
risk and maintained and kept in good condition by the Buyer until returned to BPH,
and shall not be disposed of or used other than in accordance with BPH’s written
instructions or authorisation.
12. FORCE MAJEURE
BPH reserves the right to defer the date of delivery, or to cancel the Contract or reduce
the amount of Goods ordered, if it is prevented from or delayed in carrying on its
business by acts, events, omissions or accidents beyond its reasonable control, including
without limitation strikes, lock-outs or other industrial disputes (whether involving
the workforce of BPH or any other party), failure of a utility service or transport or
telecommunications network, act of God, war, riot, civil commotion, malicious damage,
compliance with any law or governmental order, rule, regulation or direction, accident,
breakdown of plant or machinery, fire, flood, storm or default of suppliers or sub-
contractors.
13 WAIVER
13.1 A waiver of any right under the Contract is only effective if it is in writing and signed by
or on behalf of the waiving party, and it applies only to the party to whom the waiver is
addressed and the circumstances for which it is given.
13.2 Unless specifically provided otherwise, rights arising under the Contract are cumulative
and do not exclude rights provided by law.
14. ASSIGNMENT
14.1 The Buyer shall not, without the prior written consent of BPH, assign, transfer, charge,
sub-contract or deal in any other manner with all or any of its rights or obligations
under the Contract.
14.2 BPH may at any time assign, transfer, charge, sub-contract or deal in any other manner
with all or any of its rights or obligations under the Contract.
15. THIRD PARTY RIGHTS
The Contract is made for the benefit of the parties to it and (where applicable) their
successors and permitted assigns, and is not intended to benefit, or be enforceable by,
anyone else.
16. NOTICES
Any notice required to be given pursuant to this Agreement shall be in writing and shall
be delivered by hand or sent by pre-paid first-class post or recorded delivery post to
the address of the party as set out in these conditions, or such other address as may
be notified by one party to the other. A notice delivered by hand is deemed to have been
received when delivered (or, if delivery is not in business hours, 9.00 am on the first
business day following delivery). A correctly addressed notice sent by pre-paid first-class
post or recorded delivery post shall be deemed to have been received at the time at
which it would have been delivered in the normal course of post.
17. LEGAL CONSTRUCTION
17.1 The Contract and any disputes arising out of or in connection with it or its subject matter
or formation are governed by and construed in accordance with English Law.
17.2 The parties irrevocably agree that the courts of England have exclusive jurisdiction to
settle any dispute or claim that arises out of or in connection with the Contract or its
subject matter or formation.
Notes

0845 017 6972 sales@bph-uk.com www.bph-uk.com
Gillmans Industrial Estate, Natts Lane, Billingshurst, West Sussex, RH14 9EZ, UK
contact us today...
Edition 1a
hammers, pulverisers, crusher
augers, multi-processors, comp
buckets, screening buckets, ﬂa
crushers, shears, sorting grabs
processors, compactor plates,
buckets, ﬂails, magnets, hamm
sorting grabs, digging grabs, a

BPH Attachments Edition 1a

Recommended

Recommended

More Related Content

What's hot

What's hot (18)

Similar to BPH Attachments Edition 1a

Similar to BPH Attachments Edition 1a (20)

BPH Attachments Edition 1a