Brochure mini fragment

1. MINI FRAGMENT INSTRUMENTS & STAINLESS STEEL IMPLANTS
BASIC INSTRUMENT –AND IMPLANT SET MINI FRAGMENT!
1

2. 0123
MAT GmbH&Co.KG Π0123 revision: 09.09.2014
Friedrich-Wöhler-Str. 10 ; D-78576 Emmingen ; Tel.+49 7465 / 909 189
E-mail: info@mat-medical.com ; website: www.mat-medical.com
_______________________________________________________________________________________________________________________________________________________
INSTRUCTIONS FOR USE 3. (GB) Warning: The implants described may only be used in combination with MAT products!
OSTEOSYNTHESIS – STEEL IMPLANTS
(Bone: Plates / Screws / Nails / Wires / Staples ) non-sterile
IMPLANT MATERIAL:
Implants made from steel in accordance with ISO 5832 – 1 stainless steel ; ISO 5832 – 9 high nitrogen stainless steel
manufactured by MAT GmbH&Co.KG.
The surface of these implants is chemically passive: not magnetic.
These implants can be combined with the standardised material
provided that its composition lies within the analysis stipulated
in the ISO 5832 – 1 / ISO 5832 – 9 standard and the required specifications.
Material alloys with chrome-nickel (implant steel) components
can trigger a so-called chrome-nickel allergy by their nature; there are no
other known biocompatible hazards!
We would point out that implants only function correctly
if the following basic rules are observed:
- When selecting implants (bone: plates / screws / pins
wires / clips), care must be taken to choose the appropriate implants
on the basis of the weight and level of activity of the patient,
and the bone fracture to be treated.
- Note that by making the correct choice of biomechanics the forces to
be transferred by the implants remain low.
- Extreme deformation of the implants must be avoided; the cautious bending of
wires, plates and pins does not, however, lead to implant damage provided it is
done with sufficient care.
- Repeated deformation should be avoided at all costs as it will fatigue the
implant material.
- The re-use of implants is absolutely forbidden
(single use).
- We strongly advise you to inform patients of the advantages and disadvantages
of implants.
- Excessive strain as a result of body weight and the level of activity of the
patient should be avoided due to the limited strength of the implants.
Failure to observe these precautionary measures can
have serious consequences for the healing process.
INDICATIONS
These relate to the current practice of applications of implants
in osteosynthesis (e.g. see literature AO/ASIF Instruments and Implants
Texhammer*Colton ISBN 3-540-56895-6 / ISBN 0-387-56895-6).
CONTRAINDICATIONS
Acute and chronic infections; muscle, nerve or vascular diseases
that endanger the affected extremity; a lack of bony tissue or
poor bone quality (e.g. severe osteoporosis); local bone tumours.
Systemic diseases and metabolic disorders; infections and falls;
drug dependence; obesity; highly physical activities together with activities
involving extreme vibrations which can lead to overstraining of the implants.
NOTES
The user should record and keep all information provided to the patient.
It should be checked before use whether the patient tolerates the material to be implanted.
The implants described in these instructions for use
may only be used (implanted) by surgeons with the appropriate experience.
POSSIBLE NEGATIVE EFFECTS (RISKS)
Failure of the fracture to heal, allergy to the material, failure of the product (break, bending),
bone deformation and refracture, infection.
REMOVAL OF IMPLANTS
The implants are normally removed once the fracture has healed.
CLEANING AND STERILISATION OF UNSTERILE IMPLANTS
Before use, the implants must be sterilised using a validated procedure
(autoclaved).
MAT GmbH&Co.KG VALIDATED PROCEDURES
STERILISER: Steam autoclave: Temperature = 121° to 123° Celsius; Pressure = 1-1.2 bar (15 to 17 psi) with an exposure time of
at least 30 minutes in the packaged state.
STERILISER: Autoclave with prevacuum: During the prevacuum phase the air is extracted from the chamber before the steam flows in.
Standard circulation for packaged objects: 132° to 135° Celsius; Pressure = 2 – 3 bar (27 to 30 psi) with an exposure time of at least 4 to 10 minutes.
IMPORTANT NOTES: Every time the implants are used or sterilised you must first check that they function perfectly!
In the event of failure to observe these instructions or demonstrable violation, no guarantee or compensation for damages can be provided.
2

3. SET-011-0010-003 MINI FRAGMENT BASIC INSTRUMENT –AND IMPLANT SET
SET-LISTING – CONTENT FOR SET: SET-011-0010-003
TRAY-011-0010-003 Tray for Mini Fragment Basic Instrument –and Implant SET-011-0010-003 ( Graphic Case Steel )
INDEX: SET -011-0010-003 SET– LISTING – CONTENT ( PAGE 3 UP TO PAGE 5 ): INSTRUMENTS & IMPLANTS
REF.-NO.: PRODUCT – DESCRIPTION: INSTRUMENTS PCS.:
TRAY-011-0010-003 Tray for mini fragment basic instrument –and implant SET-011-0010-003 (Graphic Case) -1-
005-0210-011 Drill bit – AO shaft Ø1.1mm x length 60mm / 35mm -2-
005-0210-015 Drill bit – AO shaft Ø1.5mm x length 85mm / 60mm -2-
005-0210-019 Drill bit – AO shaft Ø2.0mm x length 100mm / 75mm -2-
005-0210-026 Drill bit – AO shaft Ø2.7mm x length 100mm / 75mm -2-
005-0210-088 Countersink – AO dental shaft for mini screws Ø1.5mm / Ø2.0mm -1-
005-0210-089 Small countersink Ø3.5mm used for Ø2.7mm / Ø3.5mm / Ø4.0mm screws, tip Ø2.0mm -1-
005-0210-095 Tap handle for dental shaft -1-
005-0211-015 Tap dental shaft Ø1.5mm used for Ø1.5mm cortical screws -2-
005-0211-019 Tap dental shaft Ø2.0mm used for Ø2.0mm cortical screws -2-
005-0211-026 Tap AO shaft Ø2.7mm with cortical pitch 1.0mm used for Ø2.7mm cortical screws -2-
005-0211-043 Tap handle with AO – quick coupling -1-
005-0212-015 Mini drill sleeve used for Ø1.1mm / Ø 1.5mm drill bits -1-
005-0212-020 Drill guide 2.0mm within 3/1 hole used for Ø2.0mm drill bit and K-wire Ø2.0mm -1-
005-0212-026 Tap sleeve Ø3.5mm, also use as Ø3.5mm drill guide -1-
005-0219-003 Depth gauge used for Ø1.5mm up to Ø2.0mm screws -1-
005-0219-004 Depth gauge used for Ø2.7mm up to Ø4.0mm screws -1-
005-0219-039 Sharp - hook -1-
005-0219-097 Screw holding forceps -1-
005-0229-001 Bending iron for mini and finger plates -1-
009-0390-015 Mini hex. screw driver with self-holding sleeve ( hex. flats 1.5mm ) used for Ø1.5mm/Ø2.0mm screws -1-
009-0390-025 Small hex. screw driver with self-holding sleeve ( hex. flats 2.5mm ) used for Ø2.7mm/Ø3.5mm/Ø4.0mm
screws
-1-
010-0020-090 Reduction forceps with points, length 135mm -1-
010-0020-350 Small hohmann retractor 6mm -1-
010-0020-352 Small hohmann retractor 8mm -1-
010-0020-354 Small hohmann retractor with broad shank -2-
300-1351-603 Periosteal elevator, extra small, curved blade and straight edge, width 3mm -1-
005-0717-012 Holding forceps 12cm -1-
3

4. SET-011-0010-003 MINI FRAGMENT BASIC INSTRUMENT –AND IMPLANT SET
SET-LISTING – CONTENT FOR SET: SET-011-0010-003
INDEX: SET -011-0010-003 SET– LISTING – CONTENT ( PAGE 3 UP TO PAGE 5 ): INSTRUMENTS & IMPLANTS
REF.-NO.: PRODUCT – DESCRIPTION: K-WIRES PCS.:
004-0310-010 K-wire with single trocar point Ø1.0mm x length 150mm, round end -10-
004-0310-012 K-wire with single trocar point Ø1.2mm x length 150mm, round end -10-
004-0310-016 K-wire with single trocar point Ø1.6mm x length 150mm, round end -10-
004-0330-008 K-wire with single trocar point Ø0.8mm x length 70mm, round end -10-
004-0330-010 K-wire with single trocar point Ø1.0mm x length 70mm, round end -10-
REF.-NO.: PRODUCT – DESCRIPTION: Steel Fullthreaded Cortical Screws Ø1.0mm PCS.:
001-0001-006 Ø1.5mm x length 6mm -4-
001-0001-007 Ø1.5mm x length 7mm -4-
001-0001-008 Ø1.5mm x length 8mm -4-
001-0001-009 Ø1.5mm x length 9mm -4-
001-0001-010 Ø1.5mm x length 10mm -4-
001-0001-011 Ø1.5mm x length 11mm -4-
001-0001-012 Ø1.5mm x length 12mm -4-
001-0001-014 Ø1.5mm x length 14mm -4-
001-0001-016 Ø1.5mm x length 16mm -4-
REF.-NO.: PRODUCT – DESCRIPTION: Steel Fullthreaded Cortical Screws Ø2.0mm PCS.:
001-0002-006 Ø2.0mm x length 6mm -6-
001-0002-008 Ø2.0mm x length 8mm -6-
001-0002-010 Ø2.0mm x length 10mm -6-
001-0002-012 Ø2.0mm x length 12mm -6-
001-0002-014 Ø2.0mm x length 14mm -6-
001-0002-016 Ø2.0mm x length 16mm -6-
001-0002-018 Ø2.0mm x length 18mm -6-
001-0002-020 Ø2.0mm x length 20mm -6-
REF.-NO.: PRODUCT – DESCRIPTION: Steel Fullthreaded Cortical Screws Ø2.7mm PCS.:
001-0003-006 Ø2.7mm x length 6mm -6-
001-0003-008 Ø2.7mm x length 8mm -6-
001-0003-010 Ø2.7mm x length 10mm -6-
001-0003-012 Ø2.7mm x length 12mm -6-
001-0003-014 Ø2.7mm x length 14mm -6-
001-0003-016 Ø2.7mm x length 16mm -6-
001-0003-018 Ø2.7mm x length 18mm -6-
001-0003-020 Ø2.7mm x length 20mm -6-
001-0003-022 Ø2.7mm x length 22mm -6-
001-0003-024 Ø2.7mm x length 24mm -6-
REF.-NO.: PRODUCT – DESCRIPTION: Steel Washer PCS.:
001-0013-001 Washer for Ø2.7mm screws -6-
REF.-NO.: PRODUCT – DESCRIPTION: Steel Plates for Ø2.7mm Screws PCS.:
PL-1044-03 Small T-plate length 32mm x 3 holes, 2.7mm -4-
PL-1046-03L Small L-plate length 34.5mm x 3 holes, Oblique LEFT, 2.7mm -2-
PL-1046-03R Small L-plate length 34.5mm x 3 holes, Oblique RIGHT, 2.7mm -2-
PL-1050-03 Quarter tubular plate, length 23mm x 3 holes, 2.7mm -2-
PL-1050-04 Quarter tubular plate, length 31mm x 4 holes, 2.7mm -2-
PL-1050-05 Quarter tubular plate, length 39mm x 5 holes, 2.7mm -2-
PL-1050-06 Quarter tubular plate, length 47mm x 6 holes, 2.7mm -2-
PL-1050-07 Quarter tubular plate, length 55mm x 7 holes, 2.7mm -2-
PL-1050-08 Quarter tubular plate, length 63mm x 8 holes, 2.7mm -2-
4

5. SET-011-0010-003 MINI FRAGMENT BASIC INSTRUMENT –AND IMPLANT SET
SET-LISTING – CONTENT FOR SET: SET-011-0010-003
INDEX: SET -011-0010-003 SET– LISTING – CONTENT ( PAGE 3 UP TO PAGE 5 ): INSTRUMENTS & IMPLANTS
REF.-NO.: PRODUCT – DESCRIPTION: Steel Plates for Ø1.5mm and Ø2.0mm Screws PCS.:
PL-1047-02 Mini T-plate 2 holes, 2.0mm -4-
PL-1049-02L Mini L-plate 2 holes, Oblique LEFT, 2.0mm -2-
PL-1049-02R Mini L-plate 2 holes, Oblique RIGHT, 2.0mm -2-
PL-1067-03 Mini plate straight 3 holes x length 17mm, 2.0mm -2-
PL-1067-04 Mini plate straight 4 holes x length 23mm, 2.0mm -2-
PL-1067-05 Mini plate straight 5 holes x length 29mm, 2.0mm -2-
RECOMMENDED STERILIZATION CONTAINER FOR SET-011-0010-003
REF.-NO.: STERILIZATION CONTAINER
C-110-135 1/1 Size container, bottom non perforated outside 580 x 280 x 135mm / inside 550 x 265x 115mm
5

6. INSTRUMENTS FOR MINI FRAGMENT SYSTEM
005-0210-011 Drill bit – AO shaft Ø1.1mm x length 60mm / 35mm
005-0210-015 Drill bit – AO shaft Ø1.5mm x length 85mm / 60mm
005-0210-019 Drill bit – AO shaft Ø2.0mm x length 100mm / 75mm
005-0210-020 Drill bit – AO shaft Ø2.0mm x length 125mm / 100mm
005-0210-026 Drill bit – AO shaft Ø2.7mm x length 100mm / 75mm
005-0210-027 Drill bit – AO shaft Ø2.7mm x length 125mm / 100mm
005-0210-211 Drill bit – round shaft Ø1.1mm x length 45mm / 30mm
005-0210-215 Drill bit – round shaft Ø1.5mm x length 70mm / 30mm
005-0210-219 Drill bit – round shaft Ø2.0mm x length 85mm / 70mm
005-0210-226 Drill bit – round shaft Ø2.7mm x length 85mm / 70mm
005-0210-088 Countersink – AO dental shaft for mini screws Ø1.5mm / Ø2.0mm
005-0210-089 Small countersink Ø3.5mm used for Ø2.7mm / Ø3.5mm / Ø4.0mm screws, tip Ø2.0mm
005-0210-095 Tap handle for dental shaft
005-0211-015 Tap dental shaft Ø1.5mm used for Ø1.5mm cortical screws
005-0211-019 Tap dental shaft Ø2.0mm used for Ø2.0mm cortical screws
005-0211-026 Tap AO shaft Ø2.7mm with cortical pitch 1.0mm used for Ø2.7mm cortical screws
005-0211-043 Tap handle with AO – quick coupling
005-0212-015 Mini double drill sleeve used for Ø1.1mm / Ø 1.5mm drill bits
005-0212-016 Mini double drill sleeve used for Ø1.5mm / Ø 2.0mm drill bits
6

7. INSTRUMENTS FOR MINI FRAGMENT SYSTEM
005-0212-017 Double drill sleeve used for Ø2.0mm / Ø 2.7mm drill bits
005-0212-020 Drill guide 2.0mm within 3/1 hole used for Ø2.0mm drill bit and K-wire Ø2.0mm
005-0222-021 Universal drill guide 2.7mm / 2.0mm used for tap Ø2.7mm drill bit and K-wire Ø2.0mm
applicable for neutral load and compression position
005-0212-026 Tap sleeve Ø3.5mm, also use as Ø3.5mm drill guide
005-0219-003 Depth gauge used for Ø1.5mm up to Ø2.0mm screws
005-0219-004 Depth gauge used for Ø2.7mm up to Ø4.0mm screws
005-0219-039 Sharp - hook
005-0219-097 Screw holding forceps
7

8. INSTRUMENTS FOR MINI FRAGMENT SYSTEM
005-0229-001 Bending iron for mini and finger plates
005-0229-004 Bending iron for 3.5mm / 2.7mm plates
005-0229-005 Bending iron for 2.7mm / 3.5mm plates
009-0390-015 Mini hex. screw driver with self-holding sleeve ( hex. flats 1.5mm ) used for Ø1.5mm/Ø2.0mm screws
009-0390-025 Small hex. screw driver with self-holding sleeve ( hex. flats 2.5mm ) used for Ø2.7mm/Ø3.5mm/Ø4.0mm
screws
009-0390-052 Self-holding sleeve for screw driver REF. 009-0390-025
009-0368-025 Small hex. screw driver for self-holding sleeve ( hex. flats 2.5mm ) used for Ø2.7mm/Ø3.5mm/Ø4.0mm
screws
009-0390-060 Coupling self-holding sleeve for screw driver REF. 009-0368-025
8

9. INSTRUMENTS FOR MINI FRAGMENT SYSTEM
010-0020-350 Small hohmann retractor 6mm
010-0020-352 Small hohmann retractor 8mm
010-0020-354 Small hohmann retractor with broad shank
300-1351-603 Periosteal elevator, extra small, curved blade and straight edge, width 3mm
010-0020-802 Periosteal elevator, small, curved blade and straight edge, width 6mm
005-0717-012 Holding forceps 12cm
010-0020-090 Reduction forceps with points, length 135mm
010-0020-088 Reposition forceps curved with ratchet fixation, one point tip, length 135mm
9

10. INSTRUMENTS FOR MINI FRAGMENT SYSTEM
010-0020-092 Reposition forceps curved with ratchet fixation, length 145mm
INS-8206-00 Verbrügge bone holding forceps, length 175mm
010-0020-070 Self-centering bone holding forceps, length 150mm
INS-8207-00 Inge 16.0cm
INS-8205-10 Scarf bone holding forceps
10

11. INSTRUMENTS FOR MINI FRAGMENT SYSTEM
300-1833-050 Bending pliers for 2.4mm up to 4.0mm plates, length 23.0cm
300-1833-052 Bending pliers for 1.0mm up to 2.0mm plates, length 20.0cm
300-3649-814 Wire bending pliers
300-3650-016 Bending bolt for K-wires Ø0.8mm up to Ø2.5mm
300-0007-430 TC-wire cutter 180mm used for soft wire Ø2.0mm – hard wire Ø1.5mm
300-0007-434 TC-wire cutter 220mm used for soft wire Ø3.0mm – hard wire Ø2.5mm
11

12. INSTRUMENTS FOR MINI FRAGMENT SYSTEM
INS-0222-22 Partsch mallet Ø22mm, weight 200g, length 19cm
MINI-LAMBOTTE OSTEOTOME
INS-23-3805-12 Mini-Lambotte Osteotome width 3mm, length 12.5cm / 5”
INS-23-3806-12 Mini-Lambotte Osteotome width 4mm, length 12.5cm / 5”
INS-23-3807-12 Mini-Lambotte Osteotome width 6mm, length 12.5cm / 5”
INS-23-3808-12 Mini-Lambotte Osteotome width 8mm, length 12.5cm / 5”
INS-23-3809-12 Mini-Lambotte Osteotome width 10mm, length 12.5cm / 5”
INS-23-3815-17 Mini-Lambotte Osteotome width 3mm, length 17cm / 6 ¼”
INS-23-3816-17 Mini-Lambotte Osteotome width 4mm, length 17cm / 6 ¼”
INS-23-3817-17 Mini-Lambotte Osteotome width 6mm, length 17cm / 6 ¼”
INS-23-3818-17 Mini-Lambotte Osteotome width 8mm, length 17cm / 6 ¼”
INS-23-3819-17 Mini-Lambotte Osteotome width 10mm, length 17cm / 6 ¼”
K – WIRES TROCAR WITH ROUND END
004-0310-010 K-wire with single trocar point Ø1.0mm x length 150mm, round end
004-0310-012 K-wire with single trocar point Ø1.2mm x length 150mm, round end
004-0310-016 K-wire with single trocar point Ø1.6mm x length 150mm, round end
004-0330-008 K-wire with single trocar point Ø0.8mm x length 70mm, round end
004-0330-010 K-wire with single trocar point Ø1.0mm x length 70mm, round end
12

13. MINI FRAGMENT DIA. 1.5MM SCREWS
STAINLESS STEEL MINI FRAGMENT
DIA. 1.5MM CORTICAL SCREW IMPLANTS
STAINLESS STEEL MINI FRAGMENT
DIA.1.5MM CORTICAL SCREW IMPLANTS, SELF-TAPPING
Product – Description:
Stainless Steel Cortical Screw, Fullthreaded Ø 1.5mm
Important Technical Dimensions:
Head Diameter Ø3.0mm
Hexagonal Socket width 1.5mm
Core Diameter for cortical Thread Ø 1.0mm
Thread Diameter Ø1.5mm
Thread Pitch 0.5mm
Applicable Drill Bit for gliding Hole Ø 1.5mm
Applicable Drill Bit for Thread Hole Ø 1.1mm
Used Tap Ø 1.5mm
Material: Stainless Steel
Product – Description:
Stainless Steel Cortical Screw, Fullthreaded Ø 1.5mm
Important Technical Dimensions:
Head Diameter Ø3.0mm
Hexagonal Socket width 1.5mm
Core Diameter for cortical Thread Ø 1.0mm
Thread Diameter Ø1.5mm
Thread Pitch 0.5mm
Applicable Drill Bit for gliding Hole Ø 1.5mm
Applicable Drill Bit for Thread Hole Ø 1.1mm
Note: tapping is not applicable!
Material: Stainless Steel
REF.-NO.: Diameter and complete Length REF.-NO.: Diameter and complete Length
001-0001-006 Ø 1.5 mm x length 6mm 001-0001-006S Ø 1.5 mm x length 6mm
001-0001-007 Ø 1.5 mm x length 7mm 001-0001-007S Ø 1.5 mm x length 7mm
001-0001-008 Ø 1.5 mm x length 8mm 001-0001-008S Ø 1.5 mm x length 8mm
001-0001-009 Ø 1.5 mm x length 9mm 001-0001-009S Ø 1.5 mm x length 9mm
001-0001-010 Ø 1.5 mm x length 10mm 001-0001-010S Ø 1.5 mm x length 10mm
001-0001-011 Ø 1.5 mm x length 11mm 001-0001-011S Ø 1.5 mm x length 11mm
001-0001-012 Ø 1.5 mm x length 12mm 001-0001-012S Ø 1.5 mm x length 12mm
001-0001-014 Ø 1.5 mm x length 14mm 001-0001-014S Ø 1.5 mm x length 14mm
001-0001-016 Ø 1.5 mm x length 16mm 001-0001-016S Ø 1.5 mm x length 16mm
001-0001-018 Ø 1.5 mm x length 18mm 001-0001-018S Ø 1.5 mm x length 18mm
001-0001-020 Ø 1.5 mm x length 20mm 001-0001-020S Ø 1.5 mm x length 20mm
13

14. MINI FRAGMENT DIA. 2.0MM SCREWS
STAINLESS STEEL MINI FRAGMENT
DIA.2.0MM CORTICAL SCREW IMPLANTS
STAINLESS STEEL MINI FRAGMENT
DIA.2.0MM CORTICAL SCREW IMPLANTS, SELF-TAPPING
Product – Description:
Stainless Steel Cortical Screw, Fullthreaded Ø 2.0mm
Important Technical Dimensions:
Head Diameter Ø4.0mm
Hexagonal Socket width 1.5mm
Core Diameter for cortical Thread Ø 1.3mm
Thread Diameter Ø2.0mm
Thread Pitch 0.6mm
Applicable Drill Bit for gliding Hole Ø 2.0mm
Applicable Drill Bit for Thread Hole Ø 1.5mm
Used Tap Ø 2.0mm
Material: Stainless Steel
Product – Description:
Stainless Steel Cortical Screw, Fullthreaded Ø 2.0mm
Important Technical Dimensions:
Head Diameter Ø4.0mm
Hexagonal Socket width 1.5mm
Core Diameter for cortical Thread Ø 1.3mm
Thread Diameter Ø2.0mm
Thread Pitch 0.6mm
Applicable Drill Bit for gliding Hole Ø 2.0mm
Applicable Drill Bit for Thread Hole Ø 1.5mm
Note: tapping is not applicable!
Material: Stainless Steel
REF.-NO.: Diameter and complete Length REF.-NO.: Diameter and complete Length
001-0002-006 Ø 2.0 mm x length 6mm 001-0002-006S Ø 2.0 mm x length 6mm
001-0002-008 Ø 2.0 mm x length 8mm 001-0002-008S Ø 2.0 mm x length 8mm
001-0002-010 Ø 2.0 mm x length 10mm 001-0002-010S Ø 2.0 mm x length 10mm
001-0002-012 Ø 2.0 mm x length 12mm 001-0002-012S Ø 2.0 mm x length 12mm
001-0002-014 Ø 2.0 mm x length 14mm 001-0002-014S Ø 2.0 mm x length 14mm
001-0002-016 Ø 2.0 mm x length 16mm 001-0002-016S Ø 2.0 mm x length 16mm
001-0002-018 Ø 2.0 mm x length 18mm 001-0002-018S Ø 2.0 mm x length 18mm
001-0002-020 Ø 2.0 mm x length 20mm 001-0002-020S Ø 2.0 mm x length 20mm
001-0002-022 Ø 2.0 mm x length 22mm 001-0002-022S Ø 2.0 mm x length 22mm
001-0002-024 Ø 2.0 mm x length 24mm 001-0002-024S Ø 2.0 mm x length 24mm
001-0002-026 Ø 2.0 mm x length 26mm 001-0002-026S Ø 2.0 mm x length 26mm
001-0002-028 Ø 2.0 mm x length 28mm 001-0002-028S Ø 2.0 mm x length 28mm
001-0002-030 Ø 2.0 mm x length 30mm 001-0002-030S Ø 2.0 mm x length 30mm
001-0002-032 Ø 2.0 mm x length 32mm 001-0002-032S Ø 2.0 mm x length 32mm
001-0002-034 Ø 2.0 mm x length 34mm 001-0002-034S Ø 2.0 mm x length 34mm
001-0002-036 Ø 2.0 mm x length 36mm 001-0002-036S Ø 2.0 mm x length 36mm
001-0002-038 Ø 2.0 mm x length 38mm 001-0002-038S Ø 2.0 mm x length 38mm
14

15. MINI FRAGMENT DIA. 2.7MM SCREWS
STAINLESS STEEL MINI FRAGMENT
DIA. 2.7MM CORTICAL SCREW IMPLANTS
STAINLESS STEEL MINI FRAGMENT
DIA. 2.7MM CORTICAL SCREW IMPLANTS, SELF-TAPPING
Product – Description:
Stainless Steel Cortical Screw, Fullthreaded Ø 2.7mm
Important Technical Dimensions:
Head Diameter Ø5.0mm
Hexagonal Socket width 2.5mm
Core Diameter for cortical Thread Ø 1.9mm
Thread Diameter Ø2.7mm
Thread Pitch 1.0mm
Applicable Drill Bit for gliding Hole Ø 2.7mm
Applicable Drill Bit for Thread Hole Ø 2.0mm
Used Tap Ø 2.7mm
Material: Stainless Steel
Product – Description:
Stainless Steel Cortical Screw, Fullthreaded Ø 2.7mm
Important Technical Dimensions:
Head Diameter Ø5.0mm
Hexagonal Socket width 2.5mm
Core Diameter for cortical Thread Ø 1.9mm
Thread Diameter Ø2.7mm
Thread Pitch 1.0mm
Applicable Drill Bit for gliding Hole Ø 2.7mm
Applicable Drill Bit for Thread Hole Ø 2.0mm
Note: tapping is not applicable!
Material: Stainless Steel
REF.-NO.: Diameter and complete Length REF.-NO.: Diameter and complete Length
001-0003-006 Ø 2.7 mm x length 6mm 001-0003-006S Ø 2.7 mm x length 6mm
001-0003-008 Ø 2.7 mm x length 8mm 001-0003-008S Ø 2.7 mm x length 8mm
001-0003-010 Ø 2.7 mm x length 10mm 001-0003-010S Ø 2.7 mm x length 10mm
001-0003-012 Ø 2.7 mm x length 12mm 001-0003-012S Ø 2.7 mm x length 12mm
001-0003-014 Ø 2.7 mm x length 14mm 001-0003-014S Ø 2.7 mm x length 14mm
001-0003-016 Ø 2.7 mm x length 16mm 001-0003-016S Ø 2.7 mm x length 16mm
001-0003-018 Ø 2.7 mm x length 18mm 001-0003-018S Ø 2.7 mm x length 18mm
001-0003-020 Ø 2.7 mm x length 20mm 001-0003-020S Ø 2.7 mm x length 20mm
001-0003-022 Ø 2.7 mm x length 22mm 001-0003-022S Ø 2.7 mm x length 22mm
001-0003-024 Ø 2.7 mm x length 24mm 001-0003-024S Ø 2.7 mm x length 24mm
001-0003-026 Ø 2.7 mm x length 26mm 001-0003-026S Ø 2.7 mm x length 26mm
001-0003-028 Ø 2.7 mm x length 28mm 001-0003-028S Ø 2.7 mm x length 28mm
001-0003-030 Ø 2.7 mm x length 30mm 001-0003-030S Ø 2.7 mm x length 30mm
001-0003-032 Ø 2.7 mm x length 32mm 001-0003-032S Ø 2.7 mm x length 32mm
001-0003-034 Ø 2.7 mm x length 34mm 001-0003-034S Ø 2.7 mm x length 34mm
001-0003-036 Ø 2.7 mm x length 36mm 001-0003-036S Ø 2.7 mm x length 36mm
001-0003-038 Ø 2.7 mm x length 38mm 001-0003-038S Ø 2.7 mm x length 38mm
001-0003-040 Ø 2.7 mm x length 40mm 001-0003-040S Ø 2.7 mm x length 40mm
001-0003-042 Ø 2.7 mm x length 42mm 001-0003-042S Ø 2.7 mm x length 42mm
001-0003-045 Ø 2.7 mm x length 45mm 001-0003-045S Ø 2.7 mm x length 45mm
001-0003-046 Ø 2.7 mm x length 46mm 001-0003-046S Ø 2.7 mm x length 46mm
001-0003-048 Ø 2.7 mm x length 48mm 001-0003-048S Ø 2.7 mm x length 48mm
001-0003-050 Ø 2.7 mm x length 50mm 001-0003-050S Ø 2.7 mm x length 50mm
001-0003-055 Ø 2.7 mm x length 55mm 001-0003-055S Ø 2.7 mm x length 55mm
001-0003-060 Ø 2.7 mm x length 60mm 001-0003-060S Ø 2.7 mm x length 60mm
001-0013-001 Washer for Ø2.7mm screws
15

16. MINI FRAGMENT 1.5MM PLATES
STAINLESS STEEL MINI FRAGMENT STRAIGHT MINI PLATE 1.5 MM
Straight Mini Plate 1.5mm with oval Holes used with Ø1.5mm steel cortical screws
Mainly applicable in phalangeal Fractures
Important technical Dimensions:
Thickness 1.0 mm
Broad / Shaft 3.8 mm
Distance Hole / Shaft 5.0 mm
Material: Stainless Steel
Product Description:
Stainless Steel Straight Mini Plate 1.5 mm
REF.-NO.: Complete Length and Holes
PL-1052-20 length 100 mm x 20 hole
STAINLESS STEEL MINI FRAGMENT MINI T-PLATES 1.5 MM
Mini T-Plates 1.5mm with oval Holes used with Ø1.5mm steel cortical screws
Mainly applicable in the distal or proximal ends phalanges
Important technical Dimensions:
Thickness 1.0 mm
Broad / Shaft 3.8 mm
Distance Hole / Shaft 5.0 mm
Material: Stainless Steel
Product Description:
Stainless Steel Mini T- Plate 1.5 mm
REF.-NO.: Complete Length and Holes
PL-1052-03 length 50 mm x 9 hole in shaft + 3 hole in head
PL-1052-04 length 50 mm x 9 hole in shaft + 4 hole in head
STAINLESS STEEL MINI FRAGMENT MINI H-PLATE 1.5 MM
Mini H-Plate 1.5mm with oval Holes used with Ø1.5mm steel cortical screws
Mainly applicable for Re -Implantation of transversely amputated Fingers
Important technical Dimensions:
Thickness 1.0 mm
Broad / Shaft 9.0 mm x 8.2 mm
Distance Hole / 5.0 mm x 4.2mm
Material: Stainless Steel
Product Description:
Stainless Steel Mini H- Plate 1.5 mm
REF.-NO.: Complete Length and Holes
PL-1052-09 length 9.0 mm x 4 hole
16

17. MINI FRAGMENT 1.5 MM PLATES
STAINLESS STEEL MINI FRAGMENT MINI CONDYLAR PLATE 1.5 MM
Mini Condylar Plate 1.5mm with oval Holes used with Ø1.5mm steel cortical screws
Mainly applicable in fractures or osteotomies near the metacarphalangeal (MP) or proximal interphalangeal (PIP) joints
Important technical Dimensions:
Thickness 1.0 mm
Broad / Shaft 3.8 mm
Distance Hole / Shaft 5.0 mm
Pin Length 14 mm x Pin width 2.0 mm
Material: Stainless Steel
Product Description:
Stainless Steel Mini Condylar Plate 1.5 mm
REF.-NO.: Complete Length and Holes REF.-NO.: Complete Length and Holes
PL-1052-06L length 26 mm x 6 hole LEFT PL-1052-06R length 26 mm x 6 hole RIGHT
17

18. MINI FRAGMENT 2.0 MM PLATES
STAINLESS STEEL MINI FRAGMENT STRAIGHT MINI ADAPTION PLATE 2.0 MM
Straight Mini Adaption Plate 2.0mm with oval Holes used with Ø2.0mm steel cortical screws
Mainly applicable as a Reconstruction Finger Plate
Important technical Dimensions:
Thickness 1.0 mm
Broad / Shaft 5.0 mm
Distance Hole / Shaft 5.0 mm
Material: Stainless Steel
Product Description:
Stainless Steel Straight Mini Plate 2.0 mm
REF.-NO.: Complete Length and Holes
PL-1068-20 length 100 mm x 20 hole
18

19. MINI FRAGMENT 2.0 MM PLATES
STAINLESS STEEL MINI FRAGMENT STRAIGHT MINI PLATES 2.0 MM
Straight Mini Plates 2.0mm with oval Holes used with Ø2.0mm steel cortical screws
Mainly applicable in Hand and – Foot Fractures
Important technical Dimensions:
Thickness 1.0 mm
Broad / Shaft 5.0 mm
Distance Hole / Shaft 5.0 mm
Material: Stainless Steel
Product Description:
Stainless Steel Straight Mini Plates 2.0 mm
REF.-NO.: Complete Length and Holes
PL-1067-14 length 22 mm x 4 hole
PL-1067-15 length 27 mm x 5 hole
PL-1067-16 length 32 mm x 6 hole
PL-1067-17 length 37 mm x 7 hole
PL-1067-18 length 42 mm x 8 hole
STAINLESS STEEL MINI FRAGMENT STRAIGHT MINI PLATES 2.0 MM
Straight Mini Plates 2.0mm with oval Holes used with Ø2.0mm steel cortical screws
Mainly applicable in Hand and – Foot Fractures
Important technical Dimensions:
Thickness 1.5 mm
Broad / Shaft 5.0 mm
Distance Hole / Shaft 5.0 mm
Material: Stainless Steel
Product Description:
Stainless Steel Straight Mini Plates 2.0 mm
REF.-NO.: Complete Length and Holes
PL-1068-06 length 32 mm x 6 hole
PL-1068-07 length 37 mm x 7 hole
PL-1068-08 length 42 mm x 8 hole
PL-1068-09 length 47 mm x 9 hole
PL-1068-10 length 52 mm x 10 hole
STAINLESS STEEL MINI FRAGMENT STRAIGHT MINI PLATES 2.0 MM
Straight Mini Plates 2.0mm with oval Holes used with Ø2.0mm steel cortical screws
Mainly applicable for diaphyseal Fractures of the Phalanges
Important technical Dimensions:
Thickness 1.0 mm
Broad / Shaft 5.0 mm
Distance Hole / Shaft 6.0 mm
Material: Stainless Steel
Product Description:
Stainless Steel Straight Mini Plates 2.0 mm
REF.-NO.: Complete Length and Holes
PL-1067-03 length 17 mm x 3 hole
PL-1067-04 length 23 mm x 4 hole
PL-1067-05 length 29 mm x 5 hole
PL-1067-06 length 35 mm x 6 hole
19

20. MINI FRAGMENT 2.0 MM PLATES
STAINLESS STEEL MINI FRAGMENT STRAIGHT LOW TOUCH MINI PLATES 2.0 MM
Straight Low Touch Mini Plates 2.0mm with oval Holes used with Ø2.0mm steel cortical screws
Mainly applicable for diaphyseal Fractures of the Phalanges
Important technical Dimensions:
Thickness 1.0 mm
Broad / Shaft 4.0 mm
Distance Hole / Shaft 6.0 mm
Material: Stainless Steel
Product Description:
Stainless Steel Straight Low Touch Mini Plates 2.0 mm
REF.-NO.: Complete Length and Holes
PL-1069-04 length 23 mm x 4 hole
PL-1069-05 length 29 mm x 5 hole
PL-1069-06 length 35 mm x 6 hole
PL-1069-07 length 41 mm x 7 hole
PL-1069-08 length 47 mm x 8 hole
PL-1069-09 length 53 mm x 9 hole
PL-1069-10 length 59 mm x 10 hole
PL-1069-20 length 119 mm x 20 hole
STAINLESS STEEL MINI FRAGMENT STRAIGHT MINI PLATE 2.0 MM
Straight Mini Plate 2.0mm with oval Holes used with Ø2.0mm steel cortical screws
Mainly applicable in phalangeal Fractures
Important technical Dimensions:
Thickness 1.2 mm
Broad / Shaft 5.0 mm
Distance Hole / Shaft 5.0 mm
Material: Stainless Steel
Product Description:
Stainless Steel Straight Mini Plate 2.0 mm
REF.-NO.: Complete Length and Holes
PL-1067-20 length 100 mm x 20 hole
20

21. MINI FRAGMENT 2.0 MM PLATES
STAINLESS STEEL MINI FRAGMENT MINI T-PLATES 2.0 MM
Mini T-Plate 2.0mm with oval Holes used with Ø2.0mm steel cortical screws
Mainly applicable in the distal or proximal ends of the metacarpal Bones
Important technical Dimensions:
Thickness 1.0 mm
Broad / Shaft 5.0 mm
Distance Hole / Shaft 6.0 mm
Material: Stainless Steel
Product Description:
Stainless Steel Mini T- Plate 2.0 mm
REF.-NO.: Complete Length and Holes
PL-1047-02 length 18 mm x 2 hole in shaft + 2 hole in head
STAINLESS STEEL MINI FRAGMENT MINI L-PLATES 2.0 MM, 90° ANGLED
Mini L-Plates 2.0mm, 90° Angled with oval Holes used with Ø2.0mm steel cortical screws
Mainly applicable in the distal or proximal ends of the metacarpal Bones
Important technical Dimensions:
Thickness 1.0 mm
Broad / Shaft 5.0 mm
Distance Hole / Shaft 6.0 mm
Material: Stainless Steel
Product Description:
Stainless Steel Mini L - Plates 2.0 mm, 90° Angled
REF.-NO.: Complete Length and Holes
PL-1048-02R length 18 mm x 2 hole in shaft + 2 hole in head, 90° RIGHT
PL-1048-02L length 18 mm x 2 hole in shaft + 2 hole in head, 90° LEFT
STAINLESS STEEL MINI FRAGMENT MINI L-PLATES 2.0 MM, OBLIQUE ANGLED
Mini L-Plates 2.0mm, Oblique Angled with oval Holes used with Ø2.0mm steel cortical screws
Mainly applicable in the distal or proximal ends of the metacarpal Bones
Important technical Dimensions:
Thickness 1.0 mm
Broad / Shaft 5.0 mm
Distance Hole / Shaft 6.0 mm
Material: Stainless Steel
Product Description:
Stainless Steel Mini L - Plates 2.0 mm, Oblique Angled
REF.-NO.: Complete Length and Holes
PL-1049-02R length 20 mm x 2 hole in shaft + 2 hole in head, Oblique RIGHT
PL-1049-02L length 20 mm x 2 hole in shaft + 2 hole in head, Oblique LEFT
21

22. MINI FRAGMENT 2.0 MM PLATES
STAINLESS STEEL MINI FRAGMENT MINI T-PLATES 2.0 MM
Mini T-Plates 2.0mm with oval Holes used with Ø2.0mm steel cortical screws
Mainly applicable in the distal or proximal ends phalanges
Important technical Dimensions:
Thickness 1.2 mm
Broad / Shaft 5.0 mm
Distance Hole / Shaft 5.0 mm
Material: Stainless Steel
Product Description:
Stainless Steel Mini T- Plate 2.0 mm
REF.-NO.: Complete Length and Holes
PL-1047-03 length 50 mm x 9 hole in shaft + 3 hole in head
PL-1047-04 length 50 mm x 9 hole in shaft + 4 hole in head
STAINLESS STEEL MINI FRAGMENT MINI H-PLATE 2.0 MM
Mini H-Plate 2.0mm with oval Holes used with Ø2.0mm steel cortical screws
Mainly applicable for Re -Implantation of transversely amputated Fingers
Important technical Dimensions:
Thickness 1.0 mm
Broad / Shaft 11.0 mm x 12.0 mm
Distance Hole / 7.0 mm x 6.0mm
Material: Stainless Steel
Product Description:
Stainless Steel Mini H- Plate 2.0 mm
REF.-NO.: Complete Length and Holes
PL-1052-12 length 12.0 mm x 4 hole
22

23. MINI FRAGMENT 2.0 MM PLATES
STAINLESS STEEL MINI FRAGMENT MINI CONDYLAR PLATE 2.0 MM
Mini Condylar Plate 2.0mm with oval Holes used with Ø2.0mm steel cortical screws
Mainly applicable in fractures or osteotomies near the metacarphalangeal (MP) or proximal interphalangeal (PIP) joints
Important technical Dimensions:
Thickness 1.2 mm
Broad / Shaft 5.0 mm
Distance Hole / Shaft 5.0 mm
Pin Length 14 mm x Pin width 2.0 mm
Material: Stainless Steel
Product Description:
Stainless Steel Mini Condylar Plate 2.0 mm
REF.-NO.: Complete Length and Holes REF.-NO.: Complete Length and Holes
PL-1053-06L length 29 mm x 6 hole LEFT PL-1053-06R length 29 mm x 6 hole RIGHT
23

24. MINI FRAGMENT 2.7 MM PLATES
STAINLESS STEEL MINI FRAGMENT STRAIGHT MINI PLATES 2.7 MM
Straight Mini Plates 2.7mm with oval Holes used with Ø2.7mm steel cortical screws
Mainly applicable in Mandibular, but also found Application in metacarpal and metatarsal Fractures
Important technical Dimensions:
Thickness 2- 6 ( hole ) 2.0 mm
Thickness 7-12 ( hole ) 2.5 mm
Broad / Shaft 8.0 mm
Distance Hole / Shaft 8.0 mm, Distance between middle Holes 11,0mm except for REF. PL-1021-02 = Distance 16.8mm
Material: Stainless Steel
Product Description:
Stainless Steel Straight Mini Plates 2.7 mm
REF.-NO.: Complete Length and Holes
PL-1021-02 length 20 mm x 2 hole
PL-1021-02-L length 26 mm x 2 hole
PL-1021-03 length 28 mm x 3 hole
PL-1021-04 length 36 mm x 4 hole
PL-1021-05 length 44 mm x 5 hole
PL-1021-06 length 52 mm x 6 hole
PL-1021-07 length 60 mm x 7 hole
PL-1021-08 length 68 mm x 8 hole
PL-1021-09 length 76 mm x 9 hole
PL-1021-10 length 84 mm x 10 hole
PL-1021-11 length 92 mm x 11 hole
PL-1021-12 length 100 mm x 12 hole
PL-1021-13 length 108 mm x 13 hole
PL-1021-14 length 116 mm x 14 hole
STAINLESS STEEL MINI FRAGMENT STRAIGHT LOW TOUCH MINI PLATES 2.7 MM
Straight Low Touch Mini Plates 2.7mm with oval Holes used with Ø2.7mm steel cortical screws
Mainly applicable in Mandibular, but also found Application in metacarpal and metatarsal Fractures
Important technical Dimensions:
Thickness 2- 6 ( hole ) 2.0 mm
Thickness 7-12 ( hole ) 2.5 mm
Broad / Shaft 8.0 mm
Distance Hole / Shaft 8.0 mm, Distance between middle Holes 11,0mm
Material: Stainless Steel
Product Description:
Stainless Steel Straight Low Touch Mini Plates 2.7 mm
REF.-NO.: Complete Length and Holes
PL-1070-02 length 20 mm x 2 hole
PL-1070-03 length 28 mm x 3 hole
PL-1070-04 length 36 mm x 4 hole
PL-1070-05 length 44 mm x 5 hole
PL-1070-06 length 52 mm x 6 hole
PL-1070-07 length 60 mm x 7 hole
PL-1070-08 length 68 mm x 8 hole
PL-1070-09 length 76 mm x 9 hole
PL-1070-10 length 84 mm x 10 hole
PL-1070-11 length 92 mm x 11 hole
PL-1070-12 Length 100 mm x 12 hole
24

25. MINI FRAGMENT 2.7 MM PLATES
STAINLESS STEEL MINI FRAGMENT QUARTER TUBULAR MINI PLATES 2.7 MM
Quarter Tubular Mini Plates 2.7mm with oval Holes used with Ø2.7mm steel cortical screws
Mainly applicable as tension band Plates in Fractures of metacarpal and metatarsal Bones
Important technical Dimensions:
Thickness 1.0 mm
Broad / Shaft 78.0 mm
Distance Hole / Shaft 8.0 mm, Distance between middle Holes 11,0mm
Material: Stainless Steel
Product Description:
Stainless Steel Quarter Tubular Mini Plates 2.7 mm
REF.-NO.: Complete Length and Holes
PL-1050-03 length 23 mm x 3 hole
PL-1050-04 length 31 mm x 4 hole
PL-1050-05 length 39 mm x 5 hole
PL-1050-06 length 47 mm x 6 hole
PL-1050-07 length 55 mm x 7 hole
PL-1050-08 length 63 mm x 8 hole
PL-1050-09 length 71 mm x 9 hole
PL-1050-10 length 79 mm x 10 hole
STAINLESS STEEL MINI FRAGMENT MINI CONDYLAR PLATE 2.7 MM
Mini Condylar Plate 2.7mm with oval Holes used with Ø2.0mm steel cortical screws
Mainly applicable in fractures or osteotomies near the metacarphalangeal (MP) or proximal interphalangeal (PIP) joints
Important technical Dimensions:
Thickness 1.5 mm
Broad / Shaft 7.0 mm
Distance Hole / Shaft 8.0 mm
Pin Length 20 mm x Pin width 2.0 mm
Material: Stainless Steel
Product Description:
Stainless Steel Mini Condylar Plate 2.7 mm
REF.-NO.: Complete Length and Holes REF.-NO.: Complete Length and Holes
PL-1055-06L length 55 mm x 6 hole LEFT PL-1055-06R length 55 mm x 6 hole RIGHT
25

26. MINI FRAGMENT 2.7 MM PLATES
STAINLESS STEEL MINI FRAGMENT MINI MULTIFRAGMENT PLATE 2.7 MM
Mini Multifragment Plate 2.7mm with round Holes used with Ø2.7mm steel cortical screws
Mainly applicable for metacarpal and metatarsal Fractures
Important technical Dimensions:
Thickness 1.2 mm
Broad / Shaft 14.5 mm
Distance Hole / Shaft 8.0 mm
Material: Stainless Steel
Product Description:
Stainless Steel Mini Multifragment Plate 2.7 mm
REF.-NO.: Complete Length and Holes
PL-1046-07 length 44.5 mm x 7 hole
STAINLESS STEEL MINI FRAGMENT MINI T-PLATES 2.7 MM
Mini T-Plates 2.7mm with oval Holes used with Ø2.7mm steel cortical screws
Mainly applicable in the distal or proximal ends of the metacarpal Bones
Important technical Dimensions:
Thickness 1.2 mm
Broad / Shaft 7.0 mm
Distance Hole / Shaft 8.0 mm
Material: Stainless Steel
Product Description:
Stainless Steel Mini T- Plates 2.7 mm
REF.-NO.: Complete Length and Holes
PL-1044-03 length 32 mm x 3 hole in shaft + 2 hole in head
PL-1044-04 length 40 mm x 4 hole in shaft + 2 hole in head
PL-1044-05 length 48 mm x 5 hole in shaft + 2 hole in head
PL-1044-06 length 56 mm x 6 hole in shaft + 2 hole in head
PL-1044-07 length 64 mm x 7 hole in shaft + 2 hole in head
PL-1044-08 length 72 mm x 8 hole in shaft + 2 hole in head
26

27. MINI FRAGMENT 2.7 MM PLATES
STAINLESS STEEL MINI FRAGMENT MINI L-PLATES 2.7 MM, 90° ANGLED
Mini L-Plates 2.7mm, 90° Angled with oval Holes used with Ø2.7mm steel cortical screws
Mainly applicable in the distal or proximal ends of the metacarpal Bones
Important technical Dimensions:
Thickness 1.2 mm
Broad / Shaft 7.0 mm
Distance Hole / Shaft 8.0 mm
Material: Stainless Steel
Product Description:
Stainless Steel Mini L - Plate 2.7 mm, 90° Angled
REF.-NO.: Complete Length and Holes
PL-1045-03R length 32 mm x 3 hole in shaft + 2 hole in head, 90° RIGHT
PL-1045-03L length 32 mm x 3 hole in shaft + 2 hole in head, 90° LEFT
STAINLESS STEEL MINI FRAGMENT MINI L-PLATES 2.7 MM, OBLIQUE ANGLED
Mini L-Plates 2.7mm, Oblique Angled with oval Holes used with Ø2.7mm steel cortical screws
Mainly applicable in the distal or proximal ends of the metacarpal Bones
Important technical Dimensions:
Thickness 1.2 mm
Broad / Shaft 7.2 mm
Distance Hole / Shaft 8.0 mm
Material: Stainless Steel
Product Description:
Stainless Steel Mini L - Plates 2.7 mm, Oblique Angled
REF.-NO.: Complete Length and Holes
PL-1046-03R length 34.5 mm x 3 hole in shaft + 2 hole in head, Oblique RIGHT
PL-1046-03L length 34.5 mm x 3 hole in shaft + 2 hole in head, Oblique LEFT
27

28. REV.: 30.03.2015
MAT GmbH&Co.KG Π0123
Friedrich-Wöhler-Str. 10 ; D-78576 Emmingen ; Tel.+49 7465 / 909 189
E-mail: info@mat-medical.com ; website: www.mat-medical.com
28