Ledge 100

1. Single
Sided
Replaceable
Fabric Graphics
Wall Mount Fixing Method
Our back lit lightboxes can be fixed to a
wall using a standard wall screw through
the back panel.
N.B. we recommend that the screw is as
close to the outer edge as possible and
must not go through any cables or LEDs.
Standard screw fixing
Free-standing Foot Plate
Our Freestanding lightboxes are
pre-drilled to suit the required foot plate.
Part no. UA30319
480 x 100 x 10mm
Wall Mount Fixing Method
Bracket, screw fixed to the wall, then
lightbox frame hooks onto bracket.
Wall mount bracket
Part no. UA10173
Ledge 100
100mm deep LED Lightbox, designed for wall mounted and ceiling
mounted applications.
Ledge 100 is a robust lightbox which allows you to incorporate large
format illuminated facades whether utilised vertically or fixed horizontally
from the ceiling and used as a light source.
Created in sizes up to 3m x 50m, Ledge 100 is a backlit lightbox with a
replaceable tension fabric facia.
When used as a freestanding element, although this is a single-sided
lightbox, textile graphics can be applied to the rear of the box to create a
non-illuminated backdrop on the reverse side.

2. Lumenal is Unibox’s sister company, specialising in the manufacture of high quality LED lighting solutions.
Based in the same UK Headquarters as Unibox, Lumenal boast a wide range of manufacturing capabilities, from custom
PCB design to bespoke aluminium extrusion manufacture.
All our LED products are
manufactured from materials
that are fully recyclable.
All our lightboxes, including the internal
electronics, are made in our Manchester
based manufacturing facility
Madein
Britain
Standard colour
temperature
Custom on request
Power
consumption
Dependent on size. Figures shown
based on 500mm x 500mm.
Operating Voltage
Diodes
Brightness
Dependent on size. Figures shown
based on 500mm x 500mm.
L70*
*L70 indicates the number
of hours before light output
drops to 70% of initial output.
Eco+ EcoPower OptiForm BL
12V DC 12V DC 24V DC
735 cd/m2
1410 cd/m2
455 cd/m2
6500K
(+/- 300k)
6500K
(+/- 300k)
6500K
(+/- 300k)
36W/m2
77W/m2
29W/m2
>36000 hrs >36000 hrs >36000 hrs
Ra-index**
**measurement of light source’s
ability to render colours correctly,
graded from 0-100.
Ra 80 80 80
Eco
12V DC
360 cd/m2
6500K
(+/- 300k)
18W/m2
>36000 hrs
80
909 cd/m2
6500K
(+/- 300k)
60W/m2
>36000 hrs
80
Eco++
24V DC
Ledge 100 Lighting Information
LED Back Panel
An algorithmically
calculated LED pitch
illuminates the rear of
your fabric graphics
Fabric Channel
An 11mm channel
allows for the insertion
& easy replacement of
silicon edged graphics
100mm
Fabric Graphic
A printed textile graphic
with fabric specifically
designed for illuminated
applications.
Profile
An extruded aluminium
profile designed for
rigidity and to dissipate
heat.
LEDs
Graphic shows
OptiForm BL LEDs
mounted to back panel.
Ledge 100 Technical Information
Ledge 100 is manufactured
in-house & delivered as a complete
display, for easy installation.
Using silicon-edged fabric
graphics, you can change the
look of interiors in minutes.
Ledge 100 is designed to be
freestanding, wall-mounted,
and ceiling-hung.
* Weight excludes graphic & power supply.
Based on a 1m² lightbox
Max height = 5m
Max width = 50m+
Depth = 100mm
Approximate
weight = 14kg/m2*
Replaceable
Fabric Graphics