More Related Content Similar to SolidCareTM (20) SolidCareTM1. SolidCare
TM
Engineered Solid Surface Solutions by Evans & Paul
140 Dupont St.
Plainview, NY 11803
T (516) 576-0800
F (516) 576-0805
www.evansandpaul.com
2014 Product Catalog
Engineered Surfacing Solutions
2. SolidCareTM
Solutions
Fully Featured
Our SolidCareTM
products and solutions offer accessible design in an assortment of combinations to meet any storage demands.
They can be recessed to create integral transitions to the walls of the surround, or freestanding options are available to fit the needs
of pre-existing spaces.
100% Acrylic Solid Surface, Nonporous, Seamless Construction with flush seamless interiors, frameless doors, integral pulls and
grommets and white interiors to facilitate cleaning. Minor cuts or scratches can easily be removed.
Solid surface resists stains, is easy to clean and simple to renew.
Features
3. Engineered to Clean
Designed to maximize cleanability by minimizing seams, joints
and tight inside corners, Evans & Paul SolidCareTM
Products are
easy to keep clean. Unlike conventional stainless steel products,
we have virtually eliminated the seams cracks and corners that
bacteria and nosocomial organisms hide in.
Flexible System
With a full range of cabinets, tables, scrub sinks, walls and Nurse
Document Centers, available in Freestanding or Recessed Styles, Evans
& Paul SolidCareTM
Products can be specified to fit your needs. Evans &
Paul SolidCareTM
Care Cabinetry has been designed for use in Surgery,
Pharmacy, Laboratory, Patient Care, Birthing and C-Section, Intensive Care,
Emergency, Imaging and Radiology, and Hybrid Spaces.
FREESTANDING
CABINETS
DESKSRECESSED
CABINETS
NCD WALLSMEDICAL SINKS
4. Made in U.S.A.
For more information, please visit us at www.evansandpaul.com or call 1-516-576-0800
©2014 Evans & Paul LLC. All Rights Reserved.
NPRC2418
24"
60"
18”
1"
16½”
55¾”
21¾”
215⁄8"
FEATURES
• 100% Acrylic Solid Surface, Nonporous, Seamless Construction
• Flush Seamless Interior Facilitates Ease of Cleaning
• Door-Frameless 1/4”Tempered Glass
• Integral Acrylic Solid Surface Flush Pulls
• Nickel Plated Hinges
• Shelf - Seamless Acrylic Solid Surface, Rated for 50lbs Evenly Distributed
• Nickel Plated Steel Pins adjustable in 5⁄8” Increments on Integral Solid
Surface Shelf Pin Ladders
• 4 Drawers
• Drawer Box Sides - Tandem Box Steel with Integral Full Extension Ball
Bearing Runners, Soft Closing
• Drawer Box Face, Bottom & Back - 100% Acrylic Solid Surface
• White Interior
18”DEEP
24”DEEP
TO BE SPECIFIED
TO BE SPECIFIED
Product #:
Product #:
Options:
Options:
Exterior Color 2
(see color guide)
Door (Glass or Solid Surface)
Exterior Color 2
(see color guide)
Door (Glass or Solid Surface)
24” Wide
(ID 1
: 20-7⁄8”x 17”D x 55”H)
24” Wide
(ID 1
: 20-7⁄8”W x 23”D x 55”H)
Notes:
1. ID = Interior Dimension (Width, Depth, Height);
2. Interior color is white;
3. Side panels not included. Please refer to spec sheet to specify;
4. See reference table for weight information and other specifications;
5. All dimenstions are +/- 1/16”.;
6. Actual depth dimension for the 18” deep is 17”; Actual depth dimension for 24”is 23”
FRONTSIDE
TOP
6
6
SOLIDCARE
ENP-NP-RC-2418
ENP-NP-RC-2424
ENP-NP-RC-2418 SHOWN
ENP-NP-RC
RECESSED COMBO CABINET WITH DRAWERS AND GLASS DOOR
EVANS & PAUL CATALOG :: SolidCare Solutions8.4 -
SOLIDCARETM
5. Made in U.S.A.
For more information, please visit us at www.evansandpaul.com or call 1-516-576-0800
©2014 Evans & Paul LLC. All Rights Reserved.
NPFS2424
24"
9"
12"
3"
24"
81¾”
60¾”
215⁄8"
FEATURES
• 100% Acrylic Solid Surface, Nonporous, Seamless Construction
• Flush Seamless Interior Facilitates Ease of Cleaning
• Door-Frameless 1/4”Tempered Glass
• Integral Acrylic Solid Surface Flush Pulls
• Nickel Plated Hinges
• Shelf - Seamless Acrylic Solid Surface, Rated for 50lbs Evenly Distributed
• Nickel Plated Steel Pins adjustable in 5⁄8” Increments on Integral Solid
Surface Shelf Pin Ladders
• 4 Drawers
• Drawer Box Sides - Tandem Box Steel with Integral Full Extension Ball
Bearing Runners, Soft Closing
• Drawer Box Face, Bottom & Back - 100% Acrylic Solid Surface
• White Interior
Doors (Glass or Solid Surface)
24”DEEP
TO BE SPECIFIED
Product #:
Options:
Exterior Color 2
(see color guide)
24” Wide
(ID 1
: 20-7⁄8”W x 23”D x 55”H)
Notes:
1. ID = Interior Dimension (Width, Depth, Height);
2. Interior color is white;
3. Side panels not included. Please refer to spec sheet to specify;
4. See reference table for weight information and other specifications;
5. All dimenstions are +/- 1/16”.;
6. Actual depth dimension for the 18” deep is 17”; Actual depth dimension for 24”is 23”
TOP
FRONTSIDE
SOLIDCARE
ENP-NP-FC-2424 SHOWN
ENP-NP-FC-2424
ENP-NP-FC
FREESTANDING COMBO CABINETWITH DRAWERS AND DOOR
EVANS & PAUL CATALOG :: SolidCare Solutions - 8.5
SOLIDCARETM
6. Made in U.S.A.
For more information, please visit us at www.evansandpaul.com or call 1-516-576-0800
©2014 Evans & Paul LLC. All Rights Reserved.
NPRS2418
215⁄8"
24"
60"55¾”
18”
1"
16½”
21¾”
FEATURES
• 100% Acrylic Solid Surface, Nonporous, Seamless Construction
• Flush Seamless Interior Facilitates Ease of Cleaning
• Door-Frameless 1/4”Tempered Glass
• Integral Acrylic Solid Surface Flush Pulls
• Nickel Plated Hinges
• Shelf - Seamless Acrylic Solid Surface, Rated for 50lbs Evenly Distributed
• Nickel Plated Steel Pins adjustable in 5⁄8” Increments on Integral Solid
Surface Shelf Pin Ladders
• 4 Drawers
• Drawer Box Sides - Tandem Box Steel with Integral Full Extension Ball
Bearing Runners, Soft Closing
• Drawer Box Face, Bottom & Back - 100% Acrylic Solid Surface
• White Interior
18”DEEP
24”DEEP
TO BE SPECIFIED
TO BE SPECIFIED
Product #:
Product #:
Options:
Options:
Exterior Color 2
(see color guide)
Door (Glass or Solid Surface)
Exterior Color 2
(see color guide)
Door (Glass or Solid Surface)
24” Wide
(ID 1
: 20-7⁄8”x 17”D x 55”H)
24” Wide
(ID 1
: 20-7⁄8”W x 23”D x 55”H)
Notes:
1. ID = Interior Dimension (Width, Depth, Height);
2. Interior color is white;
3. Side panels not included. Please refer to spec sheet to specify;
4. See reference table for weight information and other specifications;
5. All dimenstions are +/- 1/16”.;
6. Actual depth dimension for the 18” deep is 17”; Actual depth dimension for 24”is 23”
TOP
FRONTSIDE
6
6
SOLIDCARE
ENP-NP-RS-2418
ENP-NP-RS-2424
ENP-NP-RS-2418 SHOWN
ENP-NP-RS
RECESSED SUPPLY CABINET WITH A DOOR
EVANS & PAUL CATALOG :: SolidCare Solutions8.6 -
SOLIDCARETM
7. Made in U.S.A.
For more information, please visit us at www.evansandpaul.com or call 1-516-576-0800
©2014 Evans & Paul LLC. All Rights Reserved.
NPFS2424
215⁄8"
24"
9"
12"
3"
24"
60 ¾”
81 ¾”
FEATURES
• 100% Acrylic Solid Surface, Nonporous, Seamless Construction
• Flush Seamless Interior Facilitates Ease of Cleaning
• Door-Frameless 1/4”Tempered Glass
• Integral Acrylic Solid Surface Flush Pulls
• Nickel Plated Hinges
• Shelf - Seamless Acrylic Solid Surface, Rated for 50lbs Evenly Distributed
• Nickel Plated Steel Pins adjustable in 5⁄8” Increments on Integral Solid
Surface Shelf Pin Ladders
• 4 Drawers
• Drawer Box Sides - Tandem Box Steel with Integral Full Extension Ball
Bearing Runners, Soft Closing
• Drawer Box Face, Bottom & Back - 100% Acrylic Solid Surface
• White Interior
24”DEEP
TO BE SPECIFIED
Product #:
Options:
Exterior Color 2
(see color guide)
24” Wide
(ID 1
: 20-7⁄8”W x 23”D x 55”H)
Doors (Glass or Solid Surface)
Notes:
1. ID = Interior Dimension (Width, Depth, Height);
2. Interior color is white;
3. Side panels not included. Please refer to spec sheet to specify;
4. See reference table for weight information and other specifications;
5. All dimenstions are +/- 1/16”.;
6. Actual depth dimension for the 18” deep is 17”; Actual depth dimension for 24”is 23”FRONTSIDE
TOP
SOLIDCARE
ENP-NP-FS-2424 SHOWN
ENP-NP-FS-2424
ENP-NP-FS
FREESTANDING SUPPLY CABINET WITH DOOR
EVANS & PAUL CATALOG :: SolidCare Solutions - 8.7
SOLIDCARETM
8. Made in U.S.A.
For more information, please visit us at www.evansandpaul.com or call 1-516-576-0800
©2014 Evans & Paul LLC. All Rights Reserved.
NPRS3618
36"
60"55¾”
39¾”
18”
16¾"
1"
16½”
FEATURES
• 100% Acrylic Solid Surface, Nonporous, Seamless Construction
• Flush Seamless Interior Facilitates Ease of Cleaning
• Door-Frameless 1/4”Tempered Glass
• Integral Acrylic Solid Surface Flush Pulls
• Nickel Plated Hinges
• Shelf - Seamless Acrylic Solid Surface, Rated for 50lbs Evenly Distributed
• Nickel Plated Steel Pins adjustable in 5⁄8” Increments on Integral Solid
Surface Shelf Pin Ladders
• 4 Drawers
• Drawer Box Sides - Tandem Box Steel with Integral Full Extension Ball
Bearing Runners, Soft Closing
• Drawer Box Face, Bottom & Back - 100% Acrylic Solid Surface
• White Interior
18”DEEP
TO BE SPECIFIED
Product #:
Options:
Exterior Color 2
(see color guide)
Doors (Glass or Solid Surface)
30” Wide
(ID 1
: 26-7⁄8”W x 17”D x 55”H)
36” Wide
(ID 1
: 32-7⁄8”W x 17”D x 55”H)
42” Wide
(ID 1
: 38-7⁄8”W x 17”D x 55”H)
48” Wide
(ID 1
: 44-7⁄8”W x 17”D x 55”H)
24”DEEP
TO BE SPECIFIED
Product #:
Options:
Exterior Color 2
(see color guide)
30” Wide
(ID 1
: 26-7⁄8”W x 23”D x 55”H)
36” Wide
(ID 1
: 32-7⁄8”W x 23”D x 55”H)
42” Wide
(ID 1
: 38-7⁄8”W x 23”D x 55”H)
48” Wide
(ID 1
: 44-7⁄8”W x 23”D x 55”H)
Doors (Glass or Solid Surface)
Notes:
1. ID = Interior Dimension (Width, Depth, Height);
2. Interior color is white;
3. Side panels not included. Please refer to spec sheet to specify;
4. See reference table for weight information and other specifications;
5. All dimenstions are +/- 1/16”.;
6. Actual depth dimension for the 18” deep is 17”; Actual depth dimension for 24”is 23”
FRONTSIDE
TOP
6
6
SOLIDCARE
ENP-NP-RS-3018
ENP-NP-RS-3618
ENP-NP-RS-4218
ENP-NP-RS-4818
ENP-NP-RS-3024
ENP-NP-RS-3624
ENP-NP-RS-4224
ENP-NP-RS-4824
ENP-NP-RS-3618 SHOWN
ENP-NP-RS
RECESSED SUPPLY CABINET WITH DOUBLE GLASS DOORS
EVANS & PAUL CATALOG :: SolidCare Solutions8.8 -
SOLIDCARETM
9. Made in U.S.A.
For more information, please visit us at www.evansandpaul.com or call 1-516-576-0800
©2014 Evans & Paul LLC. All Rights Reserved.
NPFS3624
24"
9"
16¾"
12"
3"
36"
81¾”
60¾”
FEATURES
• 100% Acrylic Solid Surface, Nonporous, Seamless Construction
• Flush Seamless Interior Facilitates Ease of Cleaning
• Door-Frameless 1/4”Tempered Glass
• Integral Acrylic Solid Surface Flush Pulls
• Nickel Plated Hinges
• Shelf - Seamless Acrylic Solid Surface, Rated for 50lbs Evenly Distributed
• Nickel Plated Steel Pins adjustable in 5⁄8” Increments on Integral Solid
Surface Shelf Pin Ladders
• 4 Drawers
• Drawer Box Sides - Tandem Box Steel with Integral Full Extension Ball
Bearing Runners, Soft Closing
• Drawer Box Face, Bottom & Back - 100% Acrylic Solid Surface
• White Interior
Doors (Glass or Solid Surface)
24”DEEP
TO BE SPECIFIED
Product #:
Options:
Exterior Color 2
(see color guide)
30” Wide
(ID 1
: 26-7⁄8”W x 23”D x 55”H)
36” Wide
(ID 1
: 32-7⁄8”W x 23”D x 55”H)
42” Wide
(ID 1
: 38-7⁄8”W x 23”D x 55”H)
48” Wide
(ID 1
: 44-7⁄8”W x 23”D x 55”H)
Notes:
1. ID = Interior Dimension (Width, Depth, Height);
2. Interior color is white;
3. Side panels not included. Please refer to spec sheet to specify;
4. See reference table for weight information and other specifications;
5. All dimenstions are +/- 1/16”.;
6. Actual depth dimension for the 18” deep is 17”; Actual depth dimension for 24”is 23”
FRONTSIDE
TOP
SOLIDCARE
ENP-NP-FS-3624 SHOWN
ENP-NP-FS-3024
ENP-NP-FS-3624
ENP-NP-FS-4224
ENP-NP-FS-4824
ENP-NP-FS
FREESTANDING SUPPLY CABINET WITH DOUBLE DOOR
EVANS & PAUL CATALOG :: SolidCare Solutions - 8.9
SOLIDCARETM
10. Made in U.S.A.
For more information, please visit us at www.evansandpaul.com or call 1-516-576-0800
©2014 Evans & Paul LLC. All Rights Reserved.
NPRT2418
60"
24"
55¾”
21¾”
18”
215⁄8"
1"
16½”
FEATURES
• 100% Acrylic Solid Surface, Nonporous, Seamless Construction
• Flush Seamless Interior Facilitates Ease of Cleaning
• Doors-Acrylic Solid Surface
• Integral Acrylic Solid Surface Flush Pulls
• Nickel Plated Hinges
• Stainless Steel Hook Tracks on Interior Back and Sides
• Stainless Steel Hooks
• White Interior
18”DEEP
24”DEEP
TO BE SPECIFIED
TO BE SPECIFIED
Product #:
Product #:
Options:
Options:
Exterior Color 2
(see color guide)
Exterior Color 2
(see color guide)
24” Wide
(ID 1
: 20-7⁄8”x 17”D x 55”H)
24” Wide
(ID 1
: 20-7⁄8”W x 23”D x 55”H)
Notes:
1. ID = Interior Dimension (Width, Depth, Height);
2. Interior color is white;
3. Side panels not included. Please refer to spec sheet to specify;
4. See reference table for weight information and other specifications;
5. All dimenstions are +/- 1/16”.;
6. Actual depth dimension for the 18” deep is 17”; Actual depth dimension for 24”is 23”
TOP
FRONTSIDE
6
6
SOLIDCARE
ENP-NP-RT-2418
ENP-NP-RT-2424
ENP-NP-RT-2418 SHOWN
ENP-NP-RT
RECESSED TABLE ACCESSORY CABINET WITH SOLID DOOR
EVANS & PAUL CATALOG :: SolidCare Solutions8.10 -
SOLIDCARETM
11. Made in U.S.A.
For more information, please visit us at www.evansandpaul.com or call 1-516-576-0800
©2014 Evans & Paul LLC. All Rights Reserved.NPFT2424
24"
9"
12"
3"
24"
81¾”
60¾”
215⁄8"
24”DEEP
TO BE SPECIFIED
Product #:
Options:
Exterior Color 2
(see color guide)
24” Wide
(ID 1
: 20-7⁄8”W x 23”D x 55”H)
FEATURES
• 100% Acrylic Solid Surface, Nonporous, Seamless Construction
• Flush Seamless Interior Facilitates Ease of Cleaning
• Door-Acrylic Solid Surface
• Integral Acrylic Solid Surface Flush Pulls
• Nickel Plated Hinges
• Stainless Steel Hook Tracks on Interior Back and Sides
• Stainless Steel Hooks
• Sloped Top - Acrylic Solid Surface
• Base - Acrylic Solid Surface with 4 Heavy Duty Galvanized Steel Leveling
Feet
• White Interior
Notes:
1. ID = Interior Dimension (Width, Depth, Height);
2. Interior color is white;
3. Side panels not included. Please refer to spec sheet to specify;
4. See reference table for weight information and other specifications;
5. All dimenstions are +/- 1/16”.;
6. Actual depth dimension for the 18” deep is 17”; Actual depth dimension for 24”is 23”
TOP
FRONTSIDE
SOLIDCARE
ENP-NP-FT-2424 SHOWN
ENP-NP-FT-2424
ENP-NP-FT
FREESTANDING TABLE ACCESSORY CABINET WITH SOLID DOOR
EVANS & PAUL CATALOG :: SolidCare Solutions - 8.11
SOLIDCARETM
12. Made in U.S.A.
For more information, please visit us at www.evansandpaul.com or call 1-516-576-0800
©2014 Evans & Paul LLC. All Rights Reserved.
NPRT3618
36"
60"
18”
16¾"
1"
16½”
55¾”
33¾”
FEATURES
• 100% Acrylic Solid Surface, Nonporous, Seamless Construction
• Flush Seamless Interior Facilitates Ease of Cleaning
• Doors-Acrylic Solid Surface
• Integral Acrylic Solid Surface Flush Pulls
• Nickel Plated Hinges
• Stainless Steel Hook Tracks on Interior Back and Sides
• Stainless Steel Hooks
• White Interior
18”DEEP
TO BE SPECIFIED
Product #:
Options:
Exterior Color 2
(see color guide)
30” Wide
(ID 1
: 26-7⁄8”W x 17”D x 55”H)
36” Wide
(ID 1
: 32-7⁄8”W x 17”D x 55”H)
42” Wide
(ID 1
: 38-7⁄8”W x 17”D x 55”H)
48” Wide
(ID 1
: 44-7⁄8”W x 17”D x 55”H)
Notes:
1. ID = Interior Dimension (Width, Depth, Height);
2. Interior color is white;
3. Side panels not included. Please refer to spec sheet to specify;
4. See reference table for weight information and other specifications;
5. All dimenstions are +/- 1/16”.;
6. Actual depth dimension for the 18” deep is 17”; Actual depth dimension for 24”is 23”
FRONTSIDE
TOP
6
6
SOLIDCARE
ENP-NP-RT-3018
ENP-NP-RT-3618
ENP-NP-RT-4218
ENP-NP-RT-4818
ENP-NP-RT-3618 SHOWN
ENP-NP-RT
RECESSED TABLE ACCESSORY CABINET WITH DOUBLE SOLID DOOR
EVANS & PAUL CATALOG :: SolidCare Solutions8.12 -
SOLIDCARETM
13. Made in U.S.A.
For more information, please visit us at www.evansandpaul.com or call 1-516-576-0800
©2014 Evans & Paul LLC. All Rights Reserved.
NPFT3624
16¾"
24"
9"
12"
3"
36"
81¾”
60¾”
FEATURES
• 100% Acrylic Solid Surface, Nonporous, Seamless Construction
• Flush Seamless Interior Facilitates Ease of Cleaning
• Door-Acrylic Solid Surface
• Integral Acrylic Solid Surface Flush Pulls
• Nickel Plated Hinges
• Stainless Steel Hook Tracks on Interior Back and Sides
• Stainless Steel Hooks
• Sloped Top - Acrylic Solid Surface
• Base - Acrylic Solid Surface with 4 Heavy Duty Galvanized Steel
Leveling Feet
• White Interior
24”DEEP
TO BE SPECIFIED
Product #:
Options:
Exterior Color 2
(see color guide)
30” Wide
(ID 1
: 26-7⁄8”W x 23”D x 55”H)
36” Wide
(ID 1
: 32-7⁄8”W x 23”D x 55”H)
42” Wide
(ID 1
: 38-7⁄8”W x 23”D x 55”H)
48” Wide
(ID 1
: 44-7⁄8”W x 23”D x 55”H)
ENP-NP-FT-3024
ENP-NP-FT-3624
ENP-NP-FT-4224
ENP-NP-FT-4824
Notes:
1. ID = Interior Dimension (Width, Depth, Height);
2. Interior color is white;
3. Side panels not included. Please refer to spec sheet to specify;
4. See reference table for weight information and other specifications;
5. All dimenstions are +/- 1/16”.;
6. Actual depth dimension for the 18” deep is 17”; Actual depth dimension for 24”is 23”
TOP
FRONTSIDE
SOLIDCARE
ENP-NP-FT-3624 SHOWN
ENP-NP-FT
FREESTANDING TABLE ACCESSORY CABINET WITH DOUBLE SOLID DOOR
EVANS & PAUL CATALOG :: SolidCare Solutions - 8.13
SOLIDCARETM
14. Made in U.S.A.
For more information, please visit us at www.evansandpaul.com or call 1-516-576-0800
©2014 Evans & Paul LLC. All Rights Reserved.
FEATURES
• 00% Acrylic Solid Surface, Nonporous, Seamless Construction
• Flush Seamless Interior Facilitates Ease of Cleaning
• Upper Doors - Frameless 1/4”Tempered Glass
• Lower Doors - 100% Acrylic Solid Surface, Louvered for Ventilation
• Integral Acrylic Solid Surface Flush Pulls
• Nickel Plated Hinges
• Shelves - 3 Seamless Acrylic Solid Surface , Rated for 50lbs Evenly
Distributed
• Nickel Plated Steel Pins adjustable in 5⁄8” Increments on Integral Solid
Surface Shelf Pin Ladders
• Open back in lower cabinet for easy integration of electrical and data
systems
• White Interior
TO BE SPECIFIED
Product #:
Options:
Exterior Color 1
(see color guide)
72”W x 48”D x 77-¼”H
Notes:
1. Interior color is white;
2. See reference table for weight information and other specifications;
3. All dimenstions are +/- 1/16”.;
NURSE STATION
FRONT SIDE
TOP
23¼”
18¾”
77¼”
25¼”
13½”
35¼”
18¾”
23¼”
77¼”
69¼”
41¾”
35¼”31¼”
2”
24”
24”
24”
5”
29”
29”
72”
48”
VENTILATION HOLES
ENP-NP-NDC-1
ENP-NP-NDC-1
NURSE DOCUMENT CENTER #1
EVANS & PAUL CATALOG :: SolidCare Solutions8.14 -
SOLIDCARETM
15. Made in U.S.A.
For more information, please visit us at www.evansandpaul.com or call 1-516-576-0800
©2014 Evans & Paul LLC. All Rights Reserved.
FEATURES
• 100% Acrylic Solid Surface, Nonporous, Seamless Construction
• Flush Seamless Interior Facilitates Ease of Cleaning
• Admin Cabinet with Frameless 1/4”Tempered Glass Door
• Server Cabient with optional 30 space pull-our Rack and 100% Acrylic Solid
Surface Door, Louvered for Ventilation
• Integral Acrylic Solid Surface Flush Pulls
• Nickel Plated Hinges
• Nickel Plated Steel Pins adjustable in 5⁄8” Increments on Integral Solid
Surface Shelf Pin Ladders
• Open back in lower cabinet for easy integration of electrical and data
systems
• White Interior
TO BE SPECIFIED
Product #:
Options:
Server Rack (yes/no) 1
84-½”W x 60”D x 82-3⁄16”H
Exterior Color 2
(see color guide)
Notes:
1. Middle Atlantic SRSR Series, Sliding rail system, 30 spaces;
2. Interior color is white;
3. See reference table for weight information and other specifications;
4. All dimenstions are +/- 1/16”.;
NURSE STATION
TOP
FRONT SIDE
≈
19½”
84½” 60”
25¼”
177⁄8”
823⁄16”
823⁄16”
205⁄8”
32”
63⁄16”
¼”TEMPERED GLASS DOOR
SERVER
CABINET
SERVER
CABINET
25¼”
27”
60”
24”
24”36”
INTEGRAL GROMMET
CABLE CHASE
VENTILATION HOLES
KEYBOARD TRAY
WIRE MANAGEMENT
ADMINISTRATOR
CABINET
CLAD STEEL LEG
ENP-NP-NDC-2
ENP-NP-NDC-2
NURSE DOCUMENT CENTER #2
EVANS & PAUL CATALOG :: SolidCare Solutions - 8.15
SOLIDCARETM
16. Made in U.S.A.
For more information, please visit us at www.evansandpaul.com or call 1-516-576-0800
©2014 Evans & Paul LLC. All Rights Reserved.
TO BE SPECIFIED
Product #:
Options:
Exterior Color 1
(see color guide)
72”W x 48”D x 77-¼”H
The NDC3 is a peninsula style nurse document station designed to
accommodate 2 people in a small 74”x 48” footprint.
FEATURES
Seamless construction; acrylic solid surface material
Solid surface bottom surface
Seamless integrated grommet holes
Adjustable stainless steel legs with solid surface covers
Wire management included
Houdini keyboard trays included
30”height working surface
MATERIAL
Solid surface construction. Minor cuts or scratches can easily be removed.
Due to the structure of solid surface sinks resist stains, are easy to clean
and are simple to renew.
COLORS
See Evans & Paul’s color guide for suggested easy to use colors. Other
DuPont Corian colors along with custom colors are available upon request
for an addition fee.
FINISHES
Standard finish is Matte, Semi-gloss is also available.
NURSE STATION
TOP
FRONT
HOUDINI KEYBOARD
TRAY (X2)
MOUNT ON SITE
42" [1067mm]
24" [610mm]
36" [914mm] 36" [915mm]20" [508mm]
92" [2337mm]
R8" [R203mm]
R12" [R305mm]
STEEL BRACKET BELOW
WORKSURFACE @ WALL
IN WALL BLOCKING REQ'D
CENTERED 29" AFF
ADJACENT WALL
WIRE MANAGEMENT
INTEGRAL CORIAN GROMMET (X5)S.S. LEG WITH CORIAN COVER (X3)
30" [762mm]
21
4" [57mm]
63
4" [171mm]
273
4" [705mm]
SEAMLESS COVE
1
4" R EDGES TOP & BOTTOM
ADJUSTABLE SLEEVE
CORIAN COVER
ADJUSTABLE STAINLESS STEEL LEG
ENP-NP-NDC-3
NURSE DOCUMENT CENTER #3
ENP-NP-NDC-3
EVANS & PAUL CATALOG :: SolidCare Solutions8.16 -
SOLIDCARETM
17. Made in U.S.A.
For more information, please visit us at www.evansandpaul.com or call 1-516-576-0800
©2014 Evans & Paul LLC. All Rights Reserved.
Cabinet Type Product # Height Width Depth
Door
Swing
Recessed
Height
Recessed
Width
Recessed
Depth
Recessed Combo ENP-NP-RC-2418 60” 24” 18” 21-5/8” 55-3/4” 21-3/4” 17”
Recessed Combo ENP-NP-RC-2424 60” 24” 24” 21-5/8” 55-3/4” 21-3/4” 23”
Recessed Supply ENP-NP-RS-2418 60” 24” 18” 21-5/8” 55-3/4” 21-3/4” 17”
Recessed Supply ENP-NP-RS-2424 60” 24” 24” 21-5/8” 55-3/4” 21-3/4” 23”
Recessed Supply ENP-NP-RS-3018 60” 30” 18” 13-3/4” 55-3/4” 27-3/4” 17”
Recessed Supply ENP-NP-RS-3024 60” 30” 24” 13-3/4” 55-3/4” 27-3/4” 23”
Recessed Supply ENP-NP-RS-3618 60” 36” 18” 16-3/4” 55-3/4” 33-3/4” 17”
Recessed Supply ENP-NP-RS-3624 60” 36” 24” 16-3/4” 55-3/4” 33-3/4” 23”
Recessed Supply ENP-NP-RS-4218 60” 42” 18” 19-3/4” 55-3/4” 39-3/4” 17”
Recessed Supply ENP-NP-RS-4224 60” 42” 24” 19-3/4” 55-3/4” 39-3/4” 23”
Recessed Supply ENP-NP-RS-4818 60” 48” 18” 22-3/4” 55-3/4” 45-3/4” 17”
Recessed Supply ENP-NP-RS-4824 60” 48” 24” 22-3/4” 55-3/4” 45-3/4” 23”
Recessed Table Accessory ENP-NP-RT-2418 60” 24” 18” 21-5/8” 55-3/4” 21-3/4” 17”
Recessed Table Accessory ENP-NP-RT-2424 60” 24” 24” 21-5/8” 55-3/4” 21-3/4” 23”
Recessed Table Accessory ENP-NP-RT-3018 60” 30” 18” 13-3/4” 55-3/4” 27-3/4” 17”
Recessed Table Accessory ENP-NP-RT-3024 60” 30” 24” 13-3/4” 55-3/4” 27-3/4” 23”
Recessed Table Accessory ENP-NP-RT-3618 60” 36” 18” 16-3/4” 55-3/4” 33-3/4” 17”
Recessed Table Accessory ENP-NP-RT-3624 60” 36” 24” 16-3/4” 55-3/4” 33-3/4” 23”
Recessed Table Accessory ENP-NP-RT-4218 60” 42” 18” 19-3/4” 55-3/4” 39-3/4” 17”
Recessed Table Accessory ENP-NP-RT-4224 60” 42” 24” 19-3/4” 55-3/4” 39-3/4” 23”
Recessed Table Accessory ENP-NP-RT-4818 60” 48” 18” 22-3/4” 55-3/4” 45-3/4” 17”
Recessed Table Accessory ENP-NP-RT- 4824 60” 48” 24” 22-3/4” 55-3/4” 45-3/4” 23”
Freestanding Combo ENP-NP-FC-2424 81-3/4” 24” 24” 21-5/8”
Freestanding Supply ENP-NP-FS-2424 81-3/4” 24” 24” 21-5/8”
Freestanding Supply ENP-NP-FS-3024 81-3/4” 30” 24” 13-3/4”
Freestanding Supply ENP-NP-FS-3624 81-3/4” 36” 24” 16-3/4”
Freestanding Supply ENP-NP-FS-4224 81-3/4” 42” 24” 19-3/4”
Freestanding Supply ENP-NP-FS-4824 81-3/4” 48” 24” 22-3/4”
Freestanding Table Accessory ENP-NP-FT-2424 81-3/4” 24” 24” 21-5/8”
Freestanding Table Accessory ENP-NP-FT-3024 81-3/4” 30” 24” 13-3/4”
Freestanding Table Accessory ENP-NP-FT-3624 81-3/4” 36” 24” 16-3/4”
Freestanding Table Accessory ENP-NP-FT-4224 81-3/4” 42” 24” 19-3/4”
Freestanding Table Accessory ENP-NP-FT-4824 81-3/4” 48” 24” 22-3/4”
Freestanding Side Panel ENP-NP-FR-24 60” 23-1/16” 1-1/8” n/a
Freestanding Side Panel ENP-NP-FL-24 60” 23-1/16” 1-1/8” n/a
EVANS & PAUL CATALOG :: SolidCare Solutions - 8.17
REFERENCE GUIDEDIMENSION GUIDE FOR SOLIDCARETM
CABINETS
18. Made in U.S.A.
For more information, please visit us at www.evansandpaul.com or call 1-516-576-0800
©2012 Evans & Paul LLC. All Rights Reserved.
5" [126mm]
18" [457mm]
1" [25mm]
18" [457mm]
16" [406mm]
21
2" [64mm]
℄
121
2" [318mm]
1
2"
FLANGE
4" [102mm]
1
2" R
℄
TYPICAL KITCHEN DRAIN
SECTION
TOP
2
ENP-S106 SHOWN
TO BE SPECIFIED
Product #:
Color (see color guide)
Finish - Matte standard or Semi-gloss
Material:
Options:
Mounting Flange2
(yes, no*)
Notes:
* - denotes standard
1. Dimensions in gray boxes can be customized;
2. For use with non-solid surface counters;
3. Metric conversions are approximate;
4. All dimensions will be rounded to the nearest 1/8”.
5. Compatible with standard kitchen drains
6. No overflow included
SINK SERIES 100
The Sink 106 is an under mount sink designed to be seamlessly
integrated into a solid surface counter, but can also be mounted
under any counter top. It features fully coved construction, with a
kitchen style drain. This sink can be used in ADA compatible millwork
or vanities
MATERIAL
Solid surface construction. Minor cuts or scratches can easily be
removed. Due to the structure of solid surface sinks resist stains, are
easy to clean and are simple to renew.
COLORS
See Evans & Paul’s color guide for suggested easy to use colors. Other
DuPont colors along with custom colors are available upon request
for addition fee.
FINISHES
Standard finish is Matte, Semi-gloss is also available.
ENP-S106
ENP-S106
UNDERMOUNT SLOPED FRONT SINK
EVANS & PAUL CATALOG :: SolidCare Solutions8.18 -
SOLIDCARETM
19. Made in U.S.A.
For more information, please visit us at www.evansandpaul.com or call 1-516-576-0800
©2012 Evans & Paul LLC. All Rights Reserved.
5" [126mm] 4" [102mm]
18" [457mm]
1" [25mm]
18" [457mm]
16" [406mm]
21
2" [64mm]
℄
1
2"
1
2" R
FLANGE
121
2" [318mm]
4" [102mm]
℄
TYPICAL KITCHEN DRAIN
SECTION
TOP
TO BE SPECIFIED
Product #:
Color (see color guide)
Finish - Matte standard or Semi-gloss
Mounting Flange (yes, no*)
Material:
Options:
ENP-S106-R SHOWN
Notes:
* - denotes standard
1. Dimensions in gray boxes can be customized;
2. For use with non-solid surface counters;
3. Metric conversions are approximate;
4. All dimensions will be rounded to the nearest 1/8”.
5. Compatible with standard kitchen drains
6. No overflow included
The Sink 106-R is an under mount sink designed to be seamlessly
integrated into a solid surface counter, but can also be mounted
under any counter top. It features fully coved construction, with a
kitchen style drain. This sink can be used in ADA compatible millwork
or vanities
MATERIAL
Solid surface construction. Minor cuts or scratches can easily be
removed. Due to the structure of solid surface sinks resist stains, are
easy to clean and are simple to renew.
COLORS
See Evans & Paul’s color guide for suggested easy to use colors. Other
DuPont colors along with custom colors are available upon request
for addition fee.
FINISHES
Standard finish is Matte, Semi-gloss is also available.
SINK SERIES 100
ENP-S106-R
ENP-S106-R
UNDERMOUNT SLOPED FRONT SINK
EVANS & PAUL CATALOG :: SolidCare Solutions - 8.19
SOLIDCARETM
20. Made in U.S.A.
For more information, please visit us at www.evansandpaul.com or call 1-516-576-0800
©2014 Evans & Paul LLC. All Rights Reserved.
FRONT
TOP
SECTION 1 SECTION 2
CORIAN DIVIDER
PLYWOOD BRACING
HOLES FOR 3/8" LAG BOLT
(bolts not provided)
NO-DRIP EDGE
REMOVABLE CORIAN COVER
OPTIONAL BACK AND SIDE SPLASH
30" [762mm]
PVC OVERFLOW
(included)
1.2° SLOPE
Ø ¾" [19mm] OVERFLOW HOLE
24" [610mm]
PLYWOOD
BRACING
CORIAN DIVIDER
REMOVABLE
CORIAN COVER
15 ¼”[387mm]15 ¼”[387mm]
CORIAN LEG
FAUCET HOLE
OPTIONAL BACK AND SIDE SPLASH
2 1⁄8" [54mm]
SECTION 1 SECTION 2
PLYWOOD DIVIDER
½" END PANEL W⁄ ¼" SCRIBE TO WALL
60 ½”[1537mm]
Ø1 ½" [Ø38mm] WASTE
1 ¾" [45mm]
24” [610mm]
30 ¼" [768mm]30 ¼" [768mm]
TO BE SPECIFIED
Material:
Dimensions:
Product #:
Color (see color guide)
Finish - Matte standard or Semi-gloss
Backsplash & Sidesplash Height
Notes:
* - denotes standard
1. Vanity drain holes are nominally 1 ½”(38mm) in diameter and kitchen drain holes are
nominally 4 ½”(113mm) in diameter; Both accept all standard drain hardware;
2. Metric conversions are approximate;
3. All dimensions will be rounded to the nearest 1/8”.
4. Faucet and drain not included
MEDICALSINKSERIES200
The Medical Sink Series 201-60 is a double-bowl medical scrub sink
designed for installation in a niche, with a wall mounted faucet.
Optional side and backsplashes are available.
DIMENSIONS
60”Wide x 36”Front to Back x 15”Tall
Sink Depth is 9”
This product cannot be customized to your dimensional
requirements.
MATERIAL
Solid surface construction. Minor cuts or scratches can easily be
removed. Due to the structure of solid surface, sinks resist stains, are
easy to clean and are simple to renew.
COLORS
See Evans & Paul’s color guide for suggested easy to use colors.
Other DuPont colors along with custom colors are available upon
request for addition fee.
FINISHES
Standard finish is Matte, Semi-gloss is also available.
ENP-MS201-60
ENP-MS201-60
NICHED 60”MEDICAL SCRUB SINK
EVANS & PAUL CATALOG :: SolidCare Solutions8.20 -
SOLIDCARETM
21. Made in U.S.A.
For more information, please visit us at www.evansandpaul.com or call 1-516-576-0800
©2014 Evans & Paul LLC. All Rights Reserved.
FRONT
TOP
SECTION 1 SECTION 2
CORIAN DIVIDER
PLYWOOD BRACING
HOLES FOR 3/8" LAG BOLT
(bolts not provided)
NO-DRIP EDGE
REMOVABLE CORIAN COVER
OPTIONAL BACK AND SIDE SPLASH
30" [762mm]
PVC OVERFLOW
(included)
1.2° SLOPE
Ø ¾" [19mm] OVERFLOW HOLE
24" [610mm]
PLYWOOD
BRACING
CORIAN DIVIDER
REMOVABLE
CORIAN COVER
15 ¼”[387mm]
CORIAN LEG
FAUCET HOLE
OPTIONAL BACK AND SIDE SPLASH
2 1⁄8" [54mm]
SECTION 1SECTION 2
PLYWOOD DIVIDER
½" END PANEL W⁄ ¼" SCRIBE TO WALL
30 ½”[1537mm]
Ø1 ½" [Ø38mm] WASTE
1 ¾" [45mm]
TO BE SPECIFIED
Material:
Dimensions:
Product #:
Color (see color guide)
Finish - Matte standard or Semi-gloss
Backsplash & Sidesplash Height
Notes:
* - denotes standard
1. Vanity drain holes are nominally 1 ½”(38mm) in diameter and kitchen drain holes are
nominally 4 ½”(113mm) in diameter; Both accept all standard drain hardware;
2. Metric conversions are approximate;
3. All dimensions will be rounded to the nearest 1/8”.
4. Faucet and drain not included
MEDICALSINKSERIES200
The Medical Sink Series 201-30 is a single-bowl medical scrub sink designed
for installation in a niche, with a wall mounted faucet. Optional side and
backsplashes are available.
DIMENSIONS
30”Wide x 36”Front to Back x 15”Tall
Sink Depth is 9”
This product can be customized to your dimensional requirements. For
custom orders, use Model#
MATERIAL
Solid surface construction. Minor cuts or scratches can easily be removed.
Due to the structure of solid surface, sinks resist stains, are easy to clean and
are simple to renew.
COLORS
See Evans & Paul’s color guide for suggested easy to use colors. Other
DuPont colors along with custom colors are available upon request for
addition fee.
FINISHES
Standard finish is Matte, Semi-gloss is also available.
ENP-MS201-30
ENP-MS201-30
NICHED 30”MEDICAL SCRUB SINK
EVANS & PAUL CATALOG :: SolidCare Solutions - 8.21
SOLIDCARETM
22. Made in U.S.A.
For more information, please visit us at www.evansandpaul.com or call 1-516-576-0800
©2014 Evans & Paul LLC. All Rights Reserved.
FRONT
TOP
SECTION 1 SECTION 2
CORIAN DIVIDER
PLYWOOD BRACING
HOLES FOR 3/8" LAG BOLT
(bolts not provided)
NO-DRIP EDGE
REMOVABLE CORIAN COVER
OPTIONAL BACK AND SIDE SPLASH
30" [762mm]
PVC OVERFLOW
(included)
1.2° SLOPE
Ø ¾" [19mm] OVERFLOW HOLE
24" [610mm]
PLYWOOD
BRACING
CORIAN DIVIDER
REMOVABLE
CORIAN COVER
15 ¼”[387mm]
CORIAN LEG
FAUCET HOLE
OPTIONAL BACK AND SIDE SPLASH
2 /" [54mm]
SECTION 1SECTION 2
33”[838mm]
Ø1 ½" [Ø38mm] WASTE
3" [76mm]
FINISHED END PANEL
BLOCKING BY OTHERS
STEEL OUTRIGGER INCLUDED
SIDE
OPTIONAL BACK AND SIDE SPLASH
30" [762mm]
TO BE SPECIFIED
Material:
Dimensions:
Product #:
Color (see color guide)
Finish - Matte standard or Semi-gloss
Backsplash & Sidesplash Height
Notes:
* - denotes standard
1. Vanity drain holes are nominally 1 ½”(38mm) in diameter and kitchen drain holes are
nominally 4 ½”(113mm) in diameter; Both accept all standard drain hardware;
2. Metric conversions are approximate;
3. All dimensions will be rounded to the nearest 1/8”.
4. Faucet and drain not included
MEDICALSINKSERIES200
The Medical Sink Series 211-30 is a single-bowl medical scrub sink
designed for floating installation, with a wall mounted faucet.
Optional side and backsplashes are available.
DIMENSIONS
30”Wide x 36”Front to Back x 15”Tall
Sink Depth is 9”
This product can be customized to your dimensional requirements.
For custom orders, use Model#
MATERIAL
Solid surface construction. Minor cuts or scratches can easily be
removed. Due to the structure of solid surface, sinks resist stains, are
easy to clean and are simple to renew.
COLORS
See Evans & Paul’s color guide for suggested easy to use colors.
Other DuPont colors along with custom colors are available upon
request for addition fee.
FINISHES
Standard finish is Matte, Semi-gloss is also available.
ENP-MS211-30
ENP-MS211-30
FLOATING 30”MEDICAL SCRUB SINK
EVANS & PAUL CATALOG :: SolidCare Solutions8.22 -
SOLIDCARETM
23. Made in U.S.A.
For more information, please visit us at www.evansandpaul.com or call 1-516-576-0800
©2014 Evans & Paul LLC. All Rights Reserved.
FAUCET HOLE
OPTIONAL BACK AND SIDE SPLASH
151
2" [396mm]
2" [54mm]
PLYWOOD DIVIDER
SCRIBE TO WALL
3" [77mm]
1 1
2" WASTE
24" [612mm]
60" [1524mm]
30" [762mm] 30" [762mm]
CORIAN LEG
30" [760mm]
OPTIONAL BACK AND SIDE SPLASH
NO-DRIP
EDGE
PLYWOOD BRACING
HOLES FOR 3
8"
LAG BOLT
(bolts not
included)
CORIAN DIVIDER
REMOVABLE CORIAN
COVER
1.2 SLOPE
PVC OVERFLOW
(included)
3
4" [19mm] OVERFLOW
233
4" [605mm]
PLYWOOD
BRACING
CORIAN DIVIDER
REMOVABLE
CORIAN COVER
151
4" [384mm]
BLOCKING
BY OTHERS
STEEL
OUTRIGGER
INCLUDED
FINISHED
END PANEL
SECTION 1 SECTION 2
FRONT
TOP
TO BE SPECIFIED
Material:
Dimensions:
Product #:
Color (see color guide)
Finish - Matte standard or Semi-gloss
Backsplash & Sidesplash Height
Notes:
* - denotes standard
1. Vanity drain holes are nominally 1 ½”(38mm) in diameter and kitchen drain holes are
nominally 4 ½”(113mm) in diameter; Both accept all standard drain hardware;
2. Metric conversions are approximate;
3. All dimensions will be rounded to the nearest 1/8”.
4. Faucet and drain not included
MEDICALSINKSERIES200
The Medical Sink Series 211-60 is a single-bowl medical scrub sink
designed for floating installation, with a wall mounted faucet.
Optional side and backsplashes are available.
DIMENSIONS
60”Wide x 36”Front to Back x 15”Tall
Sink Depth is 9”
This product can be customized to your dimensional requirements.
For custom orders, use Model#
MATERIAL
Solid surface construction. Minor cuts or scratches can easily be
removed. Due to the structure of solid surface, sinks resist stains, are
easy to clean and are simple to renew.
COLORS
See Evans & Paul’s color guide for suggested easy to use colors.
Other DuPont colors along with custom colors are available upon
request for addition fee.
FINISHES
Standard finish is Matte, Semi-gloss is also available.
ENP-MS211-30
ENP-MS211-60
FLOATING 60”MEDICAL SCRUB SINK
EVANS & PAUL CATALOG :: SolidCare Solutions - 8.23
SOLIDCARETM
24. Made in U.S.A.
For more information, please visit us at www.evansandpaul.com or call 1-516-576-0800
©2014 Evans & Paul LLC. All Rights Reserved.
237
8" [606mm]
21
2" [63mm]
≈31
2" [89mm]
≈41
2" [115mm]
NO OVERFLOW
11" [279mm]
231
2" [597mm]
301
4" [768mm] 301
4" [768mm]
601
2" [1537mm]
151
4" [387mm]
381
4" [972mm]
111
8" [283mm]
471
2" [1207mm]
601
2" [1537mm] OVER ALL LENGTH
INCLUDING 1
4" SCRIBES AT EACH SIDE
2" [51mm] SCRIBE
91
4" [235mm]
581
2" [1486mm]
1 1
2" WASTE
1
4" SCRIBE
TO WALL
REMOVABLE CORIAN COVER
FINISH FLOOR
LOOSE SPLASHES
CORIAN LEG
SUPPORTS
1.8° SLOPE
26" [660mm]
2" [51mm]
CORIAN
SUPPORT
REMOVABLE
CORIAN DOOR
CORIAN LEG @
EACH SIDE OF
DRAIN
1.8° SLOPE
1" [25mm]
FINISH FLOOR
271
4" [693mm]
371
4" [947mm]
TO BE SPECIFIED
Material:
Dimensions:
Product #:
Color (see color guide)
Finish - Matte standard or Semi-gloss
Backsplash & Sidesplash Height
FRONT
SECTION 1 SECTION 2
TOP
Notes:
* - denotes standard
1. Vanity drain holes are nominally 1 ½”(38mm) in diameter and kitchen drain holes are
nominally 4 ½”(113mm) in diameter; Both accept all standard drain hardware;
2. Metric conversions are approximate;
3. All dimensions will be rounded to the nearest 1/8”.
4. Faucet and drain not included
MEDICALSINKSERIES200
The Medical Sink Series 203-60 is a double-bowl medical scrub sink
designed for installation in a niche, with a wall mounted faucet.
Optional side and backsplashes are available.
DIMENSIONS
60”Wide x 26”Front to Back
Sink Depth is 11”
This product cannot be customized to your dimensional
requirements.
MATERIAL
Solid surface construction. Minor cuts or scratches can easily be
removed. Due to the structure of solid surface, sinks resist stains, are
easy to clean and are simple to renew.
COLORS
See Evans & Paul’s color guide for suggested easy to use colors.
Other DuPont colors along with custom colors are available upon
request for addition fee.
FINISHES
Standard finish is Matte, Semi-gloss is also available.
ENP-MS203-60
ENP-MS203-60
NICHED 60”MEDICAL SCRUB SINK
EVANS & PAUL CATALOG :: SolidCare Solutions8.24 -
SOLIDCARETM
25. Made in U.S.A.
For more information, please visit us at www.evansandpaul.com or call 1-516-576-0800
©2014 Evans & Paul LLC. All Rights Reserved.
SCRIBE TO WALL
1 1
2" WASTE
60" [1524mm]
30" [762mm] 30" [762mm]
151
4" [384mm] FAUCET HOLE
OPTIONAL BACK AND SIDE SPLASH
15" [384mm]
71
4" [186mm]
161
2" [418mm]
81
2" [217mm]
231
4" [591mm]
271
4" [695mm]
8" [204mm]
24" [612mm]
30" [764mm]
29" [737mm]
TO BE SPECIFIED
Material:
Dimensions:
Product #:
Color (see color guide)
Finish - Matte standard or Semi-gloss
Backsplash & Sidesplash Height
FRONT
SECTION
TOP
Notes:
* - denotes standard
1. Vanity drain holes are nominally 1 ½”(38mm) in diameter and kitchen drain holes are
nominally 4 ½”(113mm) in diameter; Both accept all standard drain hardware;
2. Metric conversions are approximate;
3. All dimensions will be rounded to the nearest 1/8”.
4. Faucet and drain not included
MEDICALSINKSERIES300
The Medical Sink Series 301-60 is a double-bowl medical scrub sink
designed for installation in a niche, with a wall mounted faucet.
Optional side and backsplashes are available.
DIMENSIONS
60”Wide x 30”Front to Back.
Sink Depth is 8”
This product cannot be customized to your dimensional
requirements.
MATERIAL
Solid surface construction. Minor cuts or scratches can easily be
removed. Due to the structure of solid surface, sinks resist stains, are
easy to clean and are simple to renew.
COLORS
See Evans & Paul’s color guide for suggested easy to use colors.
Other DuPont colors along with custom colors are available upon
request for addition fee.
FINISHES
Standard finish is Matte, Semi-gloss is also available.
ENP-MS301-60
ENP-MS301-60
NICHED/CORNER 60”MEDICAL SCRUB SINK
EVANS & PAUL CATALOG :: SolidCare Solutions - 8.25
SOLIDCARETM
26. Made in U.S.A.
For more information, please visit us at www.evansandpaul.com or call 1-516-576-0800
©2012 Evans & Paul LLC. All Rights Reserved.
TOP
FRONT
℄
℄ ℄
30" [762mm]
22" [559mm]
4" [101mm] 4" [101mm]
4" [102mm]
2 1/2" [64mm]
1 3/4" [44mm] 26 1/2" [673mm]
1 3/4" [44mm]
6" [153mm]
34" [864mm]
5" [127mm]
8" [204mm]
4" [102mm]
12 7/16" [316mm]
22" [559mm]
5" [127mm]
4 3/4" [121mm]
5 3/4" [146mm]
DUPONT 810 SINK
29" [737mm]
29 1/2" [750mm]
10" [254mm]
TYPICAL SECTION
STEEL BRACKETS INCLUDED
PROVIDE BLOCKING IN WALL
PUSH BUTTON
CONICAL FAUCET
REMOVABLE TRAP
SECURED WITH FOUR
TAMPER PROOF SCREWS
PLUMIBNG DRAIN
BY OTHERS
TO BE SPECIFIED
Product #:
Color (see color guide)
Finish - Matte standard or Semi-gloss
Material:
Left Side Finished (yes/no)
Right Side Finished (yes/no)
Options:
FRONT
SECTION
PLAN
Notes:
* - Denotes Standard;
1. Typical minimum counter top width is the sink interior width plus 4”(2”in each side);
2. The minimum depth and sink setback must be coordinate with sink model dimensions;
3. For ENP sink, provide full specification or add sink product sheet;
4. Compatible with DuPont 810;
5. Overflow is not recommended for medical applications;
6. Metric conversions are approximate;
7. All dimensions will be rounded to the nearest 1/8”
VANITYSERIES20AL
The Vanity Series 21 AL a is fully compliant vanity with Anti-Ligature
features. These features include a conical faucet, push button activations,
a temper proof trap panel and a cabinet design featuring fully smoothed
corners.
Designed to fit between two walls in an alcove, this vanity is also available
with optional finished ends for the alternative installation scenarios.
These hygienic, durable and easy to clean vanities are ideal for health care
and public restrooms. The solid surfaces are non-porous, preventing the
growth of mold, mildew and bacteria. This surfacing material is Class 1
rated and Greengaurd Certified.
Other overall dimensions are available, please inquire.
FEATURES
Fully coved construction (¼“ radius)
Faucet and controls included
Tamper-resistant removable trap panel.
MATERIAL
Solid surface construction. Minor cuts or scratches can easily be removed.
Due to the structure of solid surface sinks resist stains, are easy to clean
and are simple to renew.
COLORS
Available in any DuPont Corian Color and hundreds of colors are available
as a custom option.
FINISHES
Standard finish is Matte, Semi-gloss is also available.
ENP-V21-AL
ENP-V21 SHOWN
ENP-V21-AL-30X22
ANTI-LIGATURE ADA COMPLIANT VANITY
EVANS & PAUL CATALOG :: SolidCare Solutions8.26 -
SOLIDCARETM
27. Made in U.S.A.
For more information, please visit us at www.evansandpaul.com or call 1-516-576-0800
©2012 Evans & Paul LLC. All Rights Reserved.
TOP
FRONT
℄
℄ ℄
4" [102mm]
2 1/2" [64mm]
1 3/4" [44mm] 26 1/2" [673mm]
1 3/4" [44mm]
6" [153mm]
34" [864mm]
5" [127mm]
8" [204mm]
4" [102mm]
12 7/16" [316mm]
22" [559mm]
5" [127mm]
4 3/4" [121mm]
5 3/4" [146mm]
DUPONT 810 SINK
29" [737mm]
29 1/2" [750mm]
10" [254mm]
TYPICAL SECTION
STEEL BRACKETS INCLUDED
PROVIDE BLOCKING IN WALL
PUSH BUTTON
CONICAL FAUCET
PLUMIBNG DRAIN
BY OTHERS
REMOVABLE TRAP
SECURED WITH FOUR
TAMPER PROOF SCREWS
4" [101mm]
30" [762mm]
3 3/4" [95mm]
16 3/8" [416mm]
22" [559mm] TO BE SPECIFIED
Product #:
Color (see color guide)
Finish - Matte standard or Semi-gloss
Material:
Left Side Finished (yes/no)
Right Side Finished (yes/no)
Options:
FRONT
SECTION
PLAN
Notes:
* - Denotes Standard;
1. Typical minimum counter top width is the sink interior width plus 4”(2”in each side);
2. The minimum depth and sink setback must be coordinate with sink model dimensions;
3. For ENP sink, provide full specification or add sink product sheet;
4. Compatible with DuPont 810;
5. Overflow is not recommended for medical applications;
6. Metric conversions are approximate;
7. All dimensions will be rounded to the nearest 1/8”
VANITYSERIES20AL
The Vanity Series 21 AL a is fully compliant vanity with Anti-Ligature
features. These features include a conical faucet, push button activations,
a temper proof trap panel and a cabinet design featuring fully smoothed
corners.
Designed to fit between two walls in an alcove, this vanity is also available
with optional finished ends for the alternative installation scenarios.
These hygienic, durable and easy to clean vanities are ideal for health care
and public restrooms. The solid surfaces are non-porous, preventing the
growth of mold, mildew and bacteria. This surfacing material is Class 1
rated and Greengaurd Certified.
Other overall dimensions are available, please inquire.
FEATURES
Fully coved construction (¼“ radius)
Faucet and controls included
Tamper-resistant removable trap panel.
MATERIAL
Solid surface construction. Minor cuts or scratches can easily be removed.
Due to the structure of solid surface sinks resist stains, are easy to clean
and are simple to renew.
COLORS
Available in any DuPont Corian Color and hundreds of colors are available
as a custom option.
FINISHES
Standard finish is Matte, Semi-gloss is also available.
ENP-V25-AL
ENP-V25-AL-30X22
ANTI-LIGATURE ADA COMPLIANT BUMPED FRONT VANITY
EVANS & PAUL CATALOG :: SolidCare Solutions - 8.27
SOLIDCARETM
28. R1
2" [R13mm]
1
4" [6mm]
1
2" [13mm]
R1
2" [R13mm]
6" [153mm]
6" [153mm]
SOLID SURFACE
POURED FLOORING
EXISTING WALL
OPTIONAL
3
8" 45DEG CHAMFER
SUBFLOOR
EXISTING WALL
OPTIONAL
3
8" 45DEG CHAMFER
ROLLED VINYL FLOORING
SUB FLOOR
EXISTING FLOOR
Made in U.S.A.
For more information, please visit us at www.evansandpaul.com or call 1-516-576-0800
©2014 Evans & Paul LLC. All Rights Reserved.
ENP-C02-CB-X
TO BE SPECIFIED
Product #:
Product #:
Material:
Material:
Dimensions:
Dimensions:
Notes:
1. Metricconversionsareapproximate;
2. Alldimensionswillberoundedtothenearest1⁄8”.
The clean cove system seamlessly integrates solid surface wall cladding
to resilient trowel flooring or rolled vinyl flooring. Engineered to create a
smooth transition between the two materials, making ideal for healthcare
application.
FEATURES
Fully coved construction (½“ radius)
Seamless joint
MATERIAL
Solid surface construction. Minor cuts or scratches can easily be removed.
Due to the structure of solid surface sinks resist stains, are easy to clean
and are simple to renew.
COLORS
See Evans & Paul’s color guide for suggested easy to use colors. Other
DuPont colors along with custom colors are available upon request for
addition fee.
FINISHES
Standard finish is Matte, Semi-gloss is also available.
INTEGRATED CLEAN WALL BASE WITH CLEAN COVE
CLEAN COVE BASE
BASEBOARD. 6”TYP. SECTION FOR
TROWEL FLOORING
BASEBOARD. 6”TYP. SECTION FOR
ROLLED FLOORING
X (Standard 6”)
X (Standard 6”)
Baseboard with Trowel Floor
Baseboard with Rolled Floor
Solid Surface Color (see color guide)
Flooring Color (see color guide)
Finish - Matte or Semi Gloss
Solid Surface Color (see color guide)
Flooring Color (see color guide)
Finish - Matte or Semi Gloss
CLEAN COVE BASE SHOWN
ENP-C02-CB-T
ENP-C02-CB-R
EVANS & PAUL CATALOG :: SolidCare Solutions8.28 -
SOLIDCARETM
29. X
X
7/16"
7/16"
R1
2" [R13mm]
R1
2" [R13mm]
POURED FLOORING
SOLID SURFACE
OPTIONAL
3
8" 45DEG CHAMFER
SUBFLOOR
EXISTING WALL
OPTIONAL
3
8" 45DEG CHAMFER
ROLLED VINYL FLOORING
SUB FLOOR
EXISTING FLOOR
1
4" [6mm]
Made in U.S.A.
For more information, please visit us at www.evansandpaul.com or call 1-516-576-0800
©2014 Evans & Paul LLC. All Rights Reserved.
ENP-C02-CW-X
Notes:
1. Metricconversionsareapproximate;
2. Alldimensionswillberoundedtothenearest1⁄8”.
The clean cove system seamlessly integrates solid surface wall cladding
to resilient trowel flooring or rolled vinyl flooring. Engineered to create a
smooth transition between the two materials, making ideal for healthcare
application.
FEATURES
Fully coved construction (½“ radius)
Seamless joint
MATERIAL
Solid surface construction. Minor cuts or scratches can easily be removed.
Due to the structure of solid surface sinks resist stains, are easy to clean
and are simple to renew.
COLORS
See Evans & Paul’s color guide for suggested easy to use colors. Other
DuPont colors along with custom colors are available upon request for
addition fee.
FINISHES
Standard finish is Matte, Semi-gloss is also available.
INTEGRATED CLEAN WALL WITH CLEAN COVE
CLEAN COVE WALL
TO BE SPECIFIED
Product #:
Product #:
Material:
Material:
Dimensions:
Dimensions:
Solid Surface Color (see color guide)
Flooring Color (see color guide)
Finish - Matte or Semi Gloss
Solid Surface Color (see color guide)
Flooring Color (see color guide)
Finish - Matte or Semi Gloss
X (maximum 120”)
X (maximum 120”)
Wall Cladding with Rolled Floor
Wall Cladding with Trowel Floor
WALL SECTION FOR TROWEL FLOORING
WALL SECTION FOR ROLLED FLOORING
CLEAN COVE BASE SHOWN
ENP-C02-CW-T
ENP-C02-CW-R
EVANS & PAUL CATALOG :: SolidCare Solutions - 8.29
SOLIDCARETM
30. Made in U.S.A.
For more information, please visit us at www.championpartitions.com or call 1-516-576-
0044. ©2012 Evans & Paul LLC. All Rights Reserved.
CHAMPION
PARTITIONS
113
4" [298mm]
11" [281mm]
71
2" [190mm]
11" [281mm]
71
2" [192mm]
WALL
113
4" [298mm]
11" [281mm]
71
2" [190mm]
11" [281mm]
71
2" [192mm]
WALL
11" [281mm]
71
2" [192mm]
WALL
53
4" [146mm]
11" [281mm]
71
2" [190mm]
113
4" [298mm]
11" [281mm]
71
2" [190mm]
11" [281mm]
71
2" [192mm]
WALL
11" [281mm]
71
2" [192mm]
WALL
53
4" [146mm]
11" [281mm]
71
2" [190mm]
SURFACE MOUNTED DOUBLE ROLL
FRONT DOUBLE ROLL SECTION
SURFACE MOUNTED SINGLE ROLL
FRONT SINGLE ROLL
ACC
EPTED BY
OMH
Product #:
Color (see color guide)
Finish - Matte standard or Semi-gloss
ENP-TP101 - Single
ENP-TP102 - Double
Material:
TO BE SPECIFIED
Notes:
* - denotes standard
1. Metric conversions are approximate;
2. All dimensions will be rounded to the nearest 1/8”.
TP SERIES 100
The TP Series 101 is a surface mounted single toilet paper dispenser.
FEATURES
Made from one piece of acrylic solid surface material
Bolt on constructions
Ligature resistant
Dowels are flexible, breakaway polyethylene foam rubber
Extra dowels with every dispenser
MATERIAL
Solid surface construction.
COLORS
Available in any color of DuPont™ Corian®. For a complete listing of available
colors, please see our color guide sheet.
FINISHES
Standard finish is matte. Semi-gloss is also available.
SURFACE MOUNTED TOILET PAPER DISPENSERS, LIGATURE RESISTANT
ENP-TP100 - X
ENP-TP102 SHOWN
Engineered Surfacing Solutions
EVANS & PAUL CATALOG :: SolidCare Solutions8.30 -
SOLIDCARETM
31. Made in U.S.A.
For more information, please visit us at www.championpartitions.com or call 1-516-576-
0044. ©2012 Evans & Paul LLC. All Rights Reserved.
CHAMPION
PARTITIONS
FRONT DOUBLE ROLL SECTION
SEMI-RECESSED DOUBLE ROLL
FRONT SINGLE ROLL
SEMI-RECESSED SINGLE ROLL
63
4" [171mm]
111
4" [287mm]
WALL
73
4" [198mm]
51
2" [138mm]
63
4" [172mm]
WALL
1" [25mm]
11
2" [37mm]
53
4" [147mm]
3" [75mm]
C
L
121
2" [320mm]
51
2" [139mm]
63
4" [174mm]
WALL
1" [26mm]
11
2" [37mm]
3" [76mm]
CL
113
4" [296mm]
111
4" [287mm]
73
4" [198mm]
121
2" [320mm]
51
2" [139mm]
63
4" [174mm]
WALL
1" [26mm]
3" [76mm]
CL
113
4" [296mm]
111
4" [287mm]
73
4" [198mm]
63
4" [171mm]
111
4" [287mm]
WALL
73
4" [198mm]
51
2" [138mm]
63
4" [172mm]
WALL
53
4" [147mm]
3" [75mm]
C
L
63
4" [171mm]
111
4" [287mm]
WALL
73
4" [198mm]
51
2" [138mm]
63
4" [172mm]
WALL
1" [25mm]
11
2" [37mm]
53
4" [147mm]
3" [75mm]
C
L
ACC EPTED BY
OMH
Notes:
* - denotes standard
1. Metric conversions are approximate;
2. All dimensions will be rounded to the nearest 1/8”.
TO BE SPECIFIED
Product #:
Color (see color guide)
Finish - Matte standard or Semi-gloss
ENP-TP201 - Single
ENP-TP202 - Double
Material:
TP SERIES 200
The TP Series 202 is a semi-recessed double toilet paper dispenser.
FEATURES
Made from one piece of acrylic solid surface material
Bolt on constructions
Ligature resistant
Dowels are flexible, breakaway polyethylene foam rubber
Extra dowels with every dispenser
MATERIAL
Solid surface construction.
COLORS
Available in any color of DuPont™ Corian®. For a complete listing of
available colors, please see our color guide sheet.
FINISHES
Standard finish is matte. Semi-gloss is also available.
ENP-TP200-X
SEMI-RECESSED TOILET PAPER DISPENSER, LIGATURE RESISTANT
ENP-TP202-AL SHOWN
Engineered Surfacing Solutions
EVANS & PAUL CATALOG :: SolidCare Solutions - 8.31
SOLIDCARETM
32. 51
2" [140mm]
241
2" [622mm]
173
8" [441mm]
23
8" [60mm]
147
8" [377mm]
21
4" [57mm]
6011
16" [1541mm]
Made in U.S.A.
For more information, please visit us at www.evansandpaul.com or call 1-516-576-0800
©2012 Evans & Paul LLC. All Rights Reserved.
ENP-PTTR-101
TO BE SPECIFIED
Product #:
Material:
Color (see color guide)
Finish - Matte or Semi Gloss
Notes:
1. Metricconversionsareapproximate;
2. Alldimensionswillberoundedtothenearest1/8”.
The Paper Towel and Trash Receptacle is a surface mounted combined unit
for typical wall installation. It will dispense C-fold or multifold paper towel
with out adjustment.
FEATURES
Seamless Construction; acrylic solid surface material
Bolt on construction
Curved detailed edges for safe handling
Ligature Resistant
MATERIAL
Solid surface construction. Minor cuts or scratches can easily be removed.
Due to the structure of solid surface sinks resist stains, are easy to clean
and are simple to renew.
COLORS
See Evans & Paul’s color guide for suggested easy to use colors. Other
DuPont colors along with custom colors are available upon request for
addition fee.
FINISHES
Standard finish is Matte, Semi-gloss is also available.
SURFACE MOUNTED PAPER TOWEL DISPENSER & TRASH RECEPTACLE
WC SERIES 100
ENP-PTTR-101
EVANS & PAUL CATALOG :: SolidCare Solutions8.32 -
SOLIDCARETM
33. 21
2" [64mm]
18" [457mm]
5711
16" [1466mm]
6011
16" [1541mm]
Made in U.S.A.
For more information, please visit us at www.evansandpaul.com or call 1-516-576-0800
©2012 Evans & Paul LLC. All Rights Reserved.
ENP-PTTR-201
TO BE SPECIFIED
Product #:
Material:
Color (see color guide)
Finish - Matte or Semi Gloss
Notes:
1. Metricconversionsareapproximate;
2. Alldimensionswillberoundedtothenearest1/8”.
3. 58” Roughopening.required.
The Paper Towel and Trash Receptacle is a recessed combined unit for in
wall installation. It will dispense C-fold or multifold paper towel with out
adjustment.
FEATURES
Seamless Construction; acrylic solid surface material
Bolt on construction
Curved detailed edges for safe handling
Ligature Resistant
MATERIAL
Solid surface construction. Minor cuts or scratches can easily be removed.
Due to the structure of solid surface sinks resist stains, are easy to clean
and are simple to renew.
COLORS
See Evans & Paul’s color guide for suggested easy to use colors. Other
DuPont colors along with custom colors are available upon request for
addition fee.
FINISHES
Standard finish is Matte, Semi-gloss is also available.
SEMI-RECESSED PAPER TOWEL DISPENSER & TRASH RECEPTACLE
WC SERIES 200
ENP-PTTR-201
EVANS & PAUL CATALOG :: SolidCare Solutions - 8.33
SOLIDCARETM