Hemanthkumar P is seeking a position that allows him to fully utilize his skills and potential. He has over 4 years of experience as an EMI/EMC test engineer at SGS India Pvt. Ltd. and previously worked at Electronics Test and Development Centre. He is proficient in various EMC testing standards and has experience with radiated emission, conducted emission, radiated susceptibility, and conducted susceptibility testing. He is also familiar with safety and environmental testing standards.

1. CURRICULUM VITAE
Name: Hemanthkumar.P
#18, 14th
Cross, Sri Venkateshwara Nilaya,
Agrahara Dasarahalli,
Bangalore-560079
Mobile No: +91-7353540835
E-mail ID: etdc.hemanth@gmail.com
C a r e e r O b j e c t i v e
To be a part of a highly motivated team and make the best use of my potential and skills to raise
our organization up to the pinnacle of success, and gradually make my way with my experience to
become a successful entrepreneur.
E x p e r i e n c e P r o f i l e
Total Experience: 4 Years 8 Month
 Presently working as an Consumer Testing Services -E&E as a EMI/EMC Test
Engineer, SGS India Pvt. Ltd, Bangalore-560100
 23rd
October 2013 to till date Current Overall CTC: 4.8 LPA
 Previous am working as an EMI/EMC Engineer in EMC Laboratory in Electronics Test
and Development Centre, Ministry of Communication & I.T, Dept. of Electronics &
IT, Government of India, Bangalore-560058
 01st
June 2011 to 24th
September 2013
Job Responsibilities:
 Participated in the Laboratory Quality Manual & Internal Audit as per ISO/IEC
17025:2005 Certificate for CII Institute of Quality on 26-29 March 2014 at Bangalore.
 Participated in the Workshop on EMI/EMC Design Solutions Certificate for DHIO center
for excellence held on 5th
and 6th
Feb 2016 at Bangalore.
 Independently Involved in Lab Setup (From Lab layout planning, Equipment purchasing as
per the standard and installation) under the guidance of Strategic Business Head.

2.  Involved in all activities (Preparation of LQMS Documents, Test Procedure Preparation,
and Equipment Operating Procedure Preparation) during NABL Accreditation and
successfully completed NABL accreditation without Non conformities.
 Witnessed EMC Testing at SAMEER EMC Lab, Tarang Lab and ETDC Labs for CE
certification of client products.
 Automotive EMC Testing as per CISPR25 and ISO 7637-2, ISO 16750-2, ISO10605, etc.
 EMC/EMI/ESD Standards for Commercial Electronic Products
 EMC/EMI/ESD requirements by product type:
•Information technology equipment (ITE)
•Medical products
•Measurement, control, and laboratory equipment
•Household electrical appliances and portable tools
•Generic products to be used in residential, commercial, and light- industrial environments
•Generic products to be used in industrial environments
IEC/EN Basic EMC/EMI Testing Standards Such as,
•Radiated emission testing as per CISPR 22, CISPR 11 and FCC Part15 & Part 18.
•Conducted emission testing as per CISPR 22, CISPR 11 and FCC Part15 & Part 18.
•Radiated susceptibility testing as per IEC 61000-4-3
•Conducted susceptibility testing as per IEC 61000-4-2, IEC 61000-4-4, IEC 61000-4-5,
IEC 61000-4-6, IEC 61000-4-8, IEC 61000-4-11.
 Familiar with Safety Testing Parameters as per IEC 60950-1/IS 13252 for Information
Technology Equipment.
 Environmental testing as per IEC 60068-2-series, QM 333, JSS 55555, etc.
 ETDC, Bangalore – EMC Test Engineer
 Coordinating with clients and providing them EMC testing as well as compliance certificate
as per their requirement.
 Responsible of EMC Compliance of electrical/electronic products involves Execution of
compliance test (in-house/Onsite), Development assistance, technical/design guidance
and review and analysis in areas related to EMC verification and validation for the
requirement of CE/FCC mark as per national & international standards. Execution of EMC
testing involves Feasibility study, Job acceptance & scheduling, Preparation of EMC test
plan & Execution of tests as per the plan and preparation of the technical material for the
final test report.
 Learned and applied stringent EMC standards (e.g. IEC, CISPR, FCC) ensuring products
properly tested to customer requirements.
 Upgrading the EMC lab capabilities, including the design and documentation (e.g. writing
EMC test procedures/plans).

3.  Performed Normalized site attenuation measurement OATS and Chambers as per ANSI
C63.4 for measurement of radiated emission test.
 Performed 16 point field calibration of chamber for the field uniformity calibration to ensure
the validity of the tests results.
 Verification Checking or intermediate checking of all EMC Testing Equipments as per
relevant basic standards.
A c a d e m i c D e t a i l s
Year Course Board/University College/School Specialization Percentage
2010
Bachelor of
Engineering
(B.E)
Visvesvaraya
Technological
University(VTU)
Belgaum
GM Institute of
Technology
(G.M.I.T.)-Davangere
Electronics &
Communication
60.19%
2007 Diploma
Directorate of
Technical
Education(DTE)
D.R.R.(Govt.)
-Davangere
Electronics &
Communication
62.17%
2004
Secondary
School
Leaving
Certificate
(S.S.L.C)
Karnataka
Secondary
Education
Examination
Board(KSEEB)
Junior Technical
School-Hubli
Kannada
Medium
57.58%
P e r s o n a l I n f o r m a t i o n
 Name : Hemanthkumar P
 Father’s name : Prabhu Hudedmani
 Date of Birth : 2nd
June 1987
 Sex : Male
 Marital Status : Single
 Nationality : Indian
 Languages known : English, Hindi and Kannada
DECLARATION
I hereby declare that the above written particulars are true to the best of my Knowledge and belief.
Place: Bangalore Hemanthkumar.P
Date: