Amsler Packaging Technology is a full service turnkey plant integrator specializing in liquid filling lines from concept design through to integration. Amsler works with high quality Amsler approved suppliers who develop inline & rotary fillers to strict North American specifications. Amsler Packaging Technology can provide end to end solutions from blow molding through to final palletizing. We are your source for complete liquid filling plant design and equipment sourcing, integration, training and setup.

1. Rotary Monobloc Rinser Filler Cappers
◊ Juice, tea, sport drinks, water, CSD, spirits
◊ Inline also available ◊ 100ml to 23 L
◊ Up to 40,000 bottles/hr.
Shrink Bundlers
◊ Film only, pad, tray ◊ Handle integration
◊ Fast, simple ◊ Servo operation
change overs to 45 packs/min
Reheat Stretch Blow Molders
◊ Linear and rotary ◊ Up to 24,000 bottles/hr
◊ 50ml to 23 liters ◊ Fast mold and
tooling change
Labelers
◊ Roll fed ◊ Pressure sensitive
◊ Shrink sleeve ◊ Cut and stack
United States
260 Scarlet Blvd.
Oldsmar, Florida
34677
Phone 1 (877) 738-2569
Fax (813) 855-7460
Email: service@amslerequipment.net
Mexico
Av. Hidalgo Oriente No.1312
Col. San Sebastián, C.P. 50090
Toluca, Estado de México
Phone 52 (722) 773-2929
Fax 52 (722) 773-9657
Email: service@amslerequipment.net
Sales Service
Canada
1245 Reid St. Unit # 1
Richmond Hill, Ontario
L4B 1G4
Phone (905) 707-6704
Fax (905) 707-6707
Email: service@amslerequipment.net
Complete Bottling Line Solutions, Including :
www.amslerequipment.net
© 2010 W. Amsler Equipment Inc. All specifications in this document are subject to change without notice. APTRev 1
Turnkey Blowing, Filling
Packaging Systems
Amsler Packaging Technologies
A division of W. Amsler Equipment Inc.
Exceeding Your Needs

2. Engineering
◊ Simple robust designs paired with the latest
in technology assure excellent reliability.
◊ Efficiency and ease of operation is an Amsler
requirement and trademark.
◊ Complete and thorough project management
assures success of large and small projects.
◊ Amsler equipment meets or exceeds all local
electrical and safety codes
◊ Plant design services
◊ Package design and bottle pilot production.
Complete Bottling Plant Solutions
◊ Total project management for turnkey installations
◊ Injection molding machines for preforms and caps
◊ Blowmolding equipment from 50ml to 23 liter
◊ Air conveyors for empty bottles
◊ Bottle unscramblers
◊ Monobloc rotary rinser-filler-cappers for liquid filling.
◊ Table top conveyors, accumulation tables
◊ Cooling or warming tunnels and bottle dryers
◊ Inspection systems
◊ Labelers – roll fed, shrink sleeve, cut and stack, PS
◊ Date code printers – laser or ink jet
◊ Shrink bundlers, case packers
◊ Case palletizers – high level, low level, robotic
◊ Stretch wrapping equipment
Customer Support Service
◊ Service Support hot line 7am to 11pm
1-877-738-2569
◊ Comprehensive remote machine diagnostics
and reprogramming are available via internet for
most equipment
◊ Technical sales service centers are located
in Canada, US Mexico
◊ Express part delivery
Amsler Packaging Technologies
A division of W. Amsler Equipment Inc.
Exceeding Your Needs
www.amslerequipment.net
Total Turnkey Plant Solutions
Comprehensive operator training
Introduction to Amsler Packaging Technologies
Amsler Packaging Technologies specializes in the planning, design and integration of equipment for liquid filling
plants. Under Werner Amsler’s leadership and drive for excellence the company has become a global leader with
machines in over 10 countries. Amsler Packaging Technologies has developed a lineup of machinery and equipment
to blow PET bottles from preforms, fill bottles at rates up to 40,000 hour and to convey, label and package bottles
according to customer requirements. Production capability, low power consumption, speed, reliability, ease of
operation and low maintenance requirements, are second to none with all Amsler products.
Amsler Packaging Technologies is under the umbrella of W. Amsler Enterprises, established in 1990, which also owns
W. Amsler Equipment Inc., a manufacturer of PET reheat stretch blow machines, bottle inspection, palletizing and
other ancillary equipment. Mr. Amsler’s extensive experience, beginning with Bekum Germany in 1970 and later with
his own very successful blow molding company, was instrumental in helping to establish these companies.
As the Amsler brand became more familiar, customers drove the need for Amsler to offer single-source responsibility
for all of their PET bottle blowing, filling and packaging needs. Amsler Packaging Technologies was created to meet
this demand and has been successfully meeting customers’ expectations ever since.
Our Mission:
◊ To help our customers with turnkey plant design, integration of all equipment,
commissioning and training of operators.
◊ To help our customers with the integration of Amsler’s equipment into existing plants.
◊ To take customer satisfaction to the next level....Customer Delight
◊ To constantly improve our equipment and services to stay at the top of our field.
◊ To implement new ideas and suggestions from our customers to profit all involved.
◊ To develop and maintain a motivated and innovative team of employees.
◊ To create mutually beneficial working relationships with our customers.
Filling Lines from 5ml to 23 liter
Up to 40,000 bottles per hour